]> Git Repo - J-u-boot.git/blobdiff - configs/j721e_beagleboneai64_r5_defconfig
configs: stm32mp1: Restore boot SPL from sdcard for Engicam i.Core STM32MP1 C.TOUCH 2.0
[J-u-boot.git] / configs / j721e_beagleboneai64_r5_defconfig
index ce96e4921b8c21a847bf8cf6e8d23631419c43d0..77e44963fd45dfa2a12e6bd60336225eb057ae76 100644 (file)
@@ -13,16 +13,17 @@ CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x41cf59f0
 CONFIG_ENV_SIZE=0x20000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="k3-j721e-r5-beagleboneai64"
-CONFIG_SPL_TEXT_BASE=0x41c00000
 CONFIG_DM_RESET=y
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL_STACK_R_ADDR=0x82000000
+CONFIG_SPL_TEXT_BASE=0x41c00000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x41cf59f0
 CONFIG_SPL_BSS_MAX_SIZE=0xa000
 CONFIG_SPL_STACK_R=y
+CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_SPL_SIZE_LIMIT=0xf59f0
 CONFIG_SPL_SIZE_LIMIT_PROVIDE_STACK=0x4000
 CONFIG_SPL_FS_FAT=y
@@ -30,7 +31,6 @@ CONFIG_SPL_LIBDISK_SUPPORT=y
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000
-CONFIG_SYS_BOOTM_LEN=0x4000000
 CONFIG_USE_BOOTCOMMAND=y
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_SPL_SIZE_LIMIT_SUBTRACT_GD=y
@@ -43,7 +43,6 @@ CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x84000000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x1000000
 CONFIG_SPL_EARLY_BSS=y
 CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400
 CONFIG_SPL_DMA=y
 CONFIG_SPL_ENV_SUPPORT=y
@@ -52,7 +51,6 @@ CONFIG_SPL_I2C=y
 CONFIG_SPL_DM_MAILBOX=y
 CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_POWER_DOMAIN=y
-CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SPL_REMOTEPROC=y
 CONFIG_SPL_YMODEM_SUPPORT=y
This page took 0.028644 seconds and 4 git commands to generate.