configs: stm32mp1: Restore boot SPL from sdcard for Engicam i.Core STM32MP1 C.TOUCH 2.0

[J-u-boot.git] / configs / x530_defconfig

diff --git a/configs/x530_defconfig b/configs/x530_defconfig
index fa4b20345e38efc332eb290cb3b4ff88c41d8cfb..815370c90ecc95b43ae39e9fdd8cfa3caad63cd2 100644 (file)
--- a/configs/x530_defconfig
+++ b/configs/x530_defconfig
@@ -1,53 +1,55 @@
 CONFIG_ARM=y
 CONFIG_ARCH_CPU_INIT=y
 CONFIG_ARCH_MVEBU=y
-CONFIG_SYS_TEXT_BASE=0x00800000
+CONFIG_TEXT_BASE=0x00800000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000
 CONFIG_TARGET_X530=y
+CONFIG_SF_DEFAULT_SPEED=50000000
 CONFIG_ENV_SIZE=0x10000
 CONFIG_ENV_OFFSET=0x100000
 CONFIG_ENV_SECT_SIZE=0x40000
 CONFIG_DEFAULT_DEVICE_TREE="armada-385-atl-x530"
-CONFIG_SPL_TEXT_BASE=0x40000030
 CONFIG_SPL_SERIAL=y
+CONFIG_SPL_STACK=0x4002c000
+CONFIG_SPL_TEXT_BASE=0x40000030
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x40023000
+CONFIG_SPL_BSS_MAX_SIZE=0x4000
+CONFIG_SYS_LOAD_ADDR=0x1000000
+CONFIG_SF_DEFAULT_BUS=1
 CONFIG_SPL=y
 CONFIG_DEBUG_UART_BASE=0xf1012000
 CONFIG_DEBUG_UART_CLOCK=250000000
-CONFIG_SYS_LOAD_ADDR=0x1000000
 CONFIG_ENV_ADDR=0x100000
+CONFIG_PCI=y
 CONFIG_DEBUG_UART=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
+CONFIG_SYS_CBSIZE=256
+CONFIG_SYS_PBSIZE=276
 CONFIG_SILENT_CONSOLE=y
 CONFIG_SILENT_U_BOOT_ONLY=y
 CONFIG_SILENT_CONSOLE_UPDATE_ON_RELOC=y
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_MISC_INIT_R=y
 CONFIG_SPL_MAX_SIZE=0x22fd0
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x40023000
-CONFIG_SPL_BSS_MAX_SIZE=0x4000
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK=0x4002c000
 CONFIG_SPL_WATCHDOG=y
-CONFIG_SYS_CBSIZE=256
-CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_MEMINFO=y
-# CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_PCI=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
 CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y
@@ -57,27 +59,26 @@ CONFIG_CMD_EXT4=y
 CONFIG_CMD_FAT=y
 CONFIG_CMD_FS_GENERIC=y
 CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDIDS_DEFAULT="nand0=nand"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:240M(user),8M(errlog),8M(nand-bbt)"
 CONFIG_CMD_UBI=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ARP_TIMEOUT=200
 CONFIG_NET_RETRY_COUNT=50
+CONFIG_IPV6=y
 CONFIG_SPL_OF_TRANSLATE=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_MVTWSI=y
 CONFIG_I2C_MUX=y
 CONFIG_I2C_MUX_PCA954x=y
 # CONFIG_MMC is not set
-CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_SYS_NAND_USE_FLASH_BBT=y
 CONFIG_NAND_PXA3XX=y
 CONFIG_SYS_NAND_ONFI_DETECTION=y
-CONFIG_SF_DEFAULT_BUS=1
-CONFIG_SF_DEFAULT_SPEED=50000000
 CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_SST=y
-CONFIG_PCI=y
 CONFIG_PCI_MVEBU=y
 CONFIG_DM_RTC=y
 CONFIG_RTC_DS1307=y
@@ -95,3 +96,4 @@ CONFIG_USB_ETHER_ASIX88179=y
 CONFIG_WDT=y
 CONFIG_WDT_ORION=y
 CONFIG_SPL_TINY_MEMSET=y
+# CONFIG_TOOLS_MKEFICAPSULE is not set