wandboard: README: Include the mx6qp variant in the list

[J-u-boot.git] / include / configs / flea3.h

diff --git a/include/configs/flea3.h b/include/configs/flea3.h
index 35606110816b393c8f93c9df801b9b8de5ae7a9f..6c231630b6d26049cf30bd062fbab26016553d2d 100644 (file)
--- a/include/configs/flea3.h
+++ b/include/configs/flea3.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2011, Stefano Babic <[email protected]>
  *
@@ -6,8 +7,6 @@
  * Copyright (C) 2007, Guennadi Liakhovetski <[email protected]>
  *
  * Configuration for the flea3 board.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -23,7 +22,6 @@
 #define CONFIG_MACH_TYPE               MACH_TYPE_FLEA3
 
 /* Set TEXT at the beginning of the NOR flash */
-#define CONFIG_SYS_TEXT_BASE   0xA0000000
 
 /* This is required to setup the ESDC controller */
 
@@ -47,8 +45,6 @@
 #define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 #define CONFIG_SYS_SPD_BUS_NUM         2 /* I2C3 */
 #define CONFIG_SYS_MXC_I2C3_SLAVE      0xfe
-#define CONFIG_MXC_SPI
-#define CONFIG_MXC_GPIO
 
 /*
  * UART (console)
@@ -58,14 +54,10 @@
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX      1
 
 /*
  * Command definition
  */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_DNS
 
 #define CONFIG_NET_RETRY_COUNT 100
 
@@ -79,17 +71,12 @@
 #define IMX_FEC_BASE   FEC_BASE_ADDR
 #define CONFIG_FEC_MXC_PHYADDR 0x1
 
-#define CONFIG_MII
-
 #define CONFIG_ARP_TIMEOUT     200UL
 
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP    /* undef to save memory */
-#define CONFIG_CMDLINE_EDITING
 
-#define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE      512     /* Console I/O Buffer Size */
 /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS     32      /* max number of command args */
@@ -102,7 +89,6 @@
 /*
  * Physical Memory Map
  */
-#define CONFIG_NR_DRAM_BANKS   1
 #define PHYS_SDRAM_1           CSD0_BASE_ADDR
 #define PHYS_SDRAM_1_SIZE      (128 * 1024 * 1024)
 
@@ -117,17 +103,7 @@
 /*
  * MTD Command for mtdparts
  */
-#define CONFIG_MTD_DEVICE
 #define CONFIG_FLASH_CFI_MTD
-#define CONFIG_MTD_PARTITIONS
-#define MTDIDS_DEFAULT         "nand0=mxc_nand,nor0=physmap-flash.0"
-#define MTDPARTS_DEFAULT       "mtdparts=mxc_nand:50m(root1)," \
-                               "32m(rootfb)," \
-                               "64m(pcache)," \
-                               "64m(app1)," \
-                               "10m(app2),-(spool);" \
-                               "physmap-flash.0:512k(u-boot),64k(env1)," \
-                               "64k(env2),3776k(kernel1),3776k(kernel2)"
 
 /*
  * FLASH and environment organization
@@ -162,7 +138,6 @@
 /*
  * NAND FLASH driver setup
  */
-#define CONFIG_NAND_MXC
 #define CONFIG_MXC_NAND_REGS_BASE      (NFC_BASE_ADDR)
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           (NFC_BASE_ADDR)
@@ -174,7 +149,7 @@
  * to update uboot and load kernel
  */
 
-#define CONFIG_HOSTNAME flea3
+#define CONFIG_HOSTNAME "flea3"
 #define        CONFIG_EXTRA_ENV_SETTINGS                                       \
        "netdev=eth0\0"                                                 \
        "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
@@ -192,9 +167,9 @@
        "addmisc=setenv bootargs ${bootargs} ${misc}\0"                 \
        "loadaddr=80800000\0"                                           \
        "kernel_addr_r=80800000\0"                                      \
-       "hostname=" __stringify(CONFIG_HOSTNAME) "\0"                   \
-       "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"            \
-       "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0"      \
+       "hostname=" CONFIG_HOSTNAME "\0"                        \
+       "bootfile=" CONFIG_HOSTNAME "/uImage\0"         \
+       "ramdisk_file=" CONFIG_HOSTNAME "/uRamdisk\0"   \
        "flash_self=run ramargs addip addtty addmtd addmisc;"           \
                "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
        "flash_nfs=run nfsargs addip addtty addmtd addmisc;"            \
@@ -208,7 +183,7 @@
                "run ramargs addip addtty addmtd addmisc;"              \
                "bootm ${kernel_addr_r} ${ramdisk_addr_r};"             \
                "else echo Images not loades;fi\0"                      \
-       "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"          \
+       "u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0"               \
        "load=tftp ${loadaddr} ${u-boot}\0"                             \
        "uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0"         \
        "update=protect off ${uboot_addr} +80000;"                      \