Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig

[J-u-boot.git] / include / configs / integratorap.h

diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h
index c6907b512845bfc1a0758d80f1153f4b7abfc02f..ae8399426fd522def68269272d371bd6d5dfba46 100644 (file)
--- a/include/configs/integratorap.h
+++ b/include/configs/integratorap.h
@@ -9,23 +9,7 @@
  * Philippe Robin, <[email protected]>
  * Configuration for Integrator AP board.
  *.
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -34,20 +18,8 @@
 #include "integrator-common.h"
 
 /* Integrator/AP-specific configuration */
-#define CONFIG_ARCH_INTEGRATOR
 #define CONFIG_SYS_HZ_CLOCK            24000000        /* Timer 1 is clocked at 24Mhz */
 
-/*
- * PL010 Configuration
- */
-#define CONFIG_PL010_SERIAL
-#define CONFIG_CONS_INDEX      0
-#define CONFIG_BAUDRATE                38400
-#define CONFIG_PL01x_PORTS     { (void *) (CONFIG_SYS_SERIAL0), (void *) (CONFIG_SYS_SERIAL1) }
-#define CONFIG_SYS_SERIAL0             0x16000000
-#define CONFIG_SYS_SERIAL1             0x17000000
-
-
 /*
  * BOOTP options
  */
@@ -56,51 +28,27 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_BOOTDELAY       2
 #define CONFIG_BOOTARGS                "root=/dev/mtdblock0 console=ttyAM0 console=tty"
 #define CONFIG_BOOTCOMMAND     ""
 
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_PROMPT      "Integrator-AP # "      /* Monitor Command Prompt   */
-
-#define CONFIG_SYS_FLASH_BASE  0x24000000
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_FLASH_CFI           1
-#define CONFIG_FLASH_CFI_DRIVER                1
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_SYS_MAX_FLASH_BANKS     1               /* max number of memory banks */
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT    (2*CONFIG_SYS_HZ)       /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT    (2*CONFIG_SYS_HZ)       /* Timeout for Flash Write */
+/* Flash settings */
+#define CONFIG_SYS_FLASH_SIZE          0x02000000 /* 32 MiB */
 #define CONFIG_SYS_MAX_FLASH_SECT      128
 #define CONFIG_ENV_SIZE                        32768
 
-
 /*-----------------------------------------------------------------------
  * PCI definitions
  */
 
-#define CONFIG_PCI
 #define CONFIG_CMD_PCI
-#define CONFIG_PCI_PNP
 
-#define CONFIG_NET_MULTI
 #define CONFIG_TULIP
 #define CONFIG_EEPRO100
 #define CONFIG_SYS_RX_ETH_BUFFER       8       /* use 8 rx buffer on eepro100  */
 
-
 /*-----------------------------------------------------------------------
  * There are various dependencies on the core module (CM) fitted
  * Users should refer to their CM user guide