configs: Re-sync with cmd/Kconfig

[J-u-boot.git] / configs / Sinovoip_BPI_M3_defconfig

diff --git a/configs/Sinovoip_BPI_M3_defconfig b/configs/Sinovoip_BPI_M3_defconfig
index b96be50e89418f43acb35579cb01e379d610fbc3..13dbb98689e3c874a23cefbc1d6eba07f3819bf6 100644 (file)
--- a/configs/Sinovoip_BPI_M3_defconfig
+++ b/configs/Sinovoip_BPI_M3_defconfig
@@ -1,26 +1,34 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN8I_A83T=y
+CONFIG_DRAM_TYPE=7
 CONFIG_DRAM_CLK=480
 CONFIG_DRAM_ZQ=15355
 CONFIG_DRAM_ODT_EN=y
-CONFIG_DRAM_TYPE=7
-CONFIG_SYS_EXTRA_OPTIONS=""
-#CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
-#CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
+CONFIG_INITIAL_USB_SCAN_DELAY=500
+CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
+CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
+CONFIG_USB0_ID_DET="PH11"
+CONFIG_USB1_VBUS_PIN="PD24"
 CONFIG_AXP_GPIO=y
-#CONFIG_USB_MUSB_HOST=y
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-sinovoip-bpi-m3"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="SATAPWR=SUNXI_GPD(25)"
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_MMC=y
 # CONFIG_CMD_FPGA is not set
-CONFIG_AXP_DCDC1_VOLT=3000
-CONFIG_AXP_DCDC2_VOLT=900
-CONFIG_AXP_DCDC3_VOLT=900
-CONFIG_AXP_DCDC4_VOLT=0
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
 CONFIG_AXP_DCDC5_VOLT=1200
-CONFIG_AXP_ALDO2_VOLT=0
-CONFIG_AXP_ALDO3_VOLT=0
-CONFIG_AXP_DLDO4_VOLT=0
+CONFIG_AXP_DLDO3_VOLT=2500
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_MUSB_HOST=y