Big white-space cleanup.

[J-u-boot.git] / include / configs / Total5200.h

diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h
index d8686dd39c0072b5b6ce1f06c4db764578abf112..31f10dd87c09256e508406fc42388e45e8ca1c32 100644 (file)
--- a/include/configs/Total5200.h
+++ b/include/configs/Total5200.h
@@ -48,11 +48,6 @@
 #define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM          0x02    /* Software reboot           */
 
-#define CFG_CACHELINE_SIZE     32      /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value */
-#endif
-
 /*
  * Serial console configuration
  */
@@ -63,7 +58,6 @@
 /*
  * Video console
  */
-#if 1
 #define CONFIG_VIDEO
 #define CONFIG_VIDEO_SED13806
 #define CONFIG_VIDEO_SED13806_16BPP
@@ -76,10 +70,6 @@
 #define CONFIG_VIDEO_SW_CURSOR
 #define CONFIG_SPLASH_SCREEN
 
-#define ADD_VIDEO_CMD  CFG_CMD_BMP
-#else
-#define ADD_VIDEO_CMD  0
-#endif
 
 #ifdef CONFIG_MPC5200  /* MGT5100 PCI is not supported yet. */
 /*
@@ -90,6 +80,7 @@
 #define CONFIG_PCI             1
 #define CONFIG_PCI_PNP         1
 #define CONFIG_PCI_SCAN_SHOW   1
+#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE        1
 
 #define CONFIG_PCI_MEM_BUS     0x40000000
 #define CONFIG_PCI_MEM_PHYS    CONFIG_PCI_MEM_BUS
@@ -105,12 +96,9 @@
 #define CFG_RX_ETH_BUFFER      8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X         1
 
-#define ADD_PCI_CMD            CFG_CMD_PCI
-
 #else  /* MGT5100 */
 
 #define CONFIG_MII             1
-#define ADD_PCI_CMD            0  /* no CFG_CMD_PCI */
 
 #endif
 
@@ -119,29 +107,36 @@
 #define CONFIG_DOS_PARTITION
 
 /* USB */
-#if 1
 #define CONFIG_USB_OHCI
-#define ADD_USB_CMD             CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
-#else
-#define ADD_USB_CMD             0
-#endif
+
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
 
 /*
- * Supported commands
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS                (CONFIG_CMD_DFL | \
-                                CFG_CMD_PING   | \
-                                CFG_CMD_I2C    | \
-                                CFG_CMD_EEPROM | \
-                                CFG_CMD_FAT    | \
-                                CFG_CMD_IDE    | \
-                                ADD_VIDEO_CMD  | \
-                                ADD_PCI_CMD    | \
-                                ADD_USB_CMD)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#if defined(CONFIG_MPC5200)
+    #define CONFIG_CMD_PCI
+#endif
+
+#define CONFIG_CMD_BMP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_USB
+
 
 #if (TEXT_BASE == 0xFE000000)          /* Boot low */
 #   define CFG_LOWBOOT         1
@@ -155,7 +150,7 @@
 #define CONFIG_PREBOOT \
        "setenv stdout serial;setenv stderr serial;" \
        "echo;" \
-       "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+       "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
        "echo"
 
 #undef CONFIG_BOOTARGS
@@ -183,7 +178,7 @@
 /*
  * IPB Bus clocking configuration.
  */
-#undef CFG_IPBCLK_EQUALS_XLBCLK                /* define for 133MHz speed */
+#undef CFG_IPBCLK_EQUALS_XLBCLK                /* define for 133MHz speed */
 #endif
 
 /*
@@ -303,7 +298,7 @@
  */
 #define CFG_LONGHELP                   /* undef to save memory     */
 #define CFG_PROMPT             "=> "   /* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE             1024    /* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE             256     /* Console I/O Buffer Size  */
@@ -319,6 +314,12 @@
 
 #define CFG_HZ                 1000    /* decrementer freq: 1 ms ticks */
 
+#define CFG_CACHELINE_SIZE     32      /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value */
+#endif
+
+
 /*
  * Various low-level settings
  */