serial: Rename SERIAL_SUPPORT to SERIAL

[J-u-boot.git] / configs / k2hk_evm_defconfig

diff --git a/configs/k2hk_evm_defconfig b/configs/k2hk_evm_defconfig
index 4da35031fec6952a6b6de1703ab3a231ac356c42..854e19743101d2b48c282b2c87cc422d57dc3adb 100644 (file)
--- a/configs/k2hk_evm_defconfig
+++ b/configs/k2hk_evm_defconfig
@@ -1,4 +1,6 @@
 CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_SPL_SKIP_LOWLEVEL_INIT=y
 CONFIG_SYS_DCACHE_OFF=y
 CONFIG_ARCH_CPU_INIT=y
 CONFIG_ARCH_KEYSTONE=y
@@ -11,30 +13,33 @@ CONFIG_NR_DRAM_BANKS=2
 CONFIG_TARGET_K2HK_EVM=y
 CONFIG_ENV_SIZE=0x40000
 CONFIG_ENV_OFFSET=0x100000
-CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000
+CONFIG_SYS_MALLOC_LEN=0x2000000
 CONFIG_SPL_DM_SPI=y
-CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="keystone-k2hk-evm"
+CONFIG_SPL_SERIAL=y
 CONFIG_SPL=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_DEFAULT_DEVICE_TREE="keystone-k2hk-evm"
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_BOARD_SETUP=y
 # CONFIG_USE_BOOTCOMMAND is not set
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_BOARD_EARLY_INIT_F=y
-CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_I2C=y
 CONFIG_SPL_NAND_DRIVERS=y
 CONFIG_SPL_NAND_ECC=y
 CONFIG_SPL_NAND_BASE=y
 CONFIG_SPL_DM_SPI_FLASH=y
-CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_POWER=y
 CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x10000
+CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
+CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=6
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=20
 CONFIG_CMD_MX_CYCLIC=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_GPIO is not set
 # CONFIG_CMD_GPT is not set
-# CONFIG_CMD_MMC is not set
 CONFIG_CMD_NAND=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_BOOTP_DNS2=y
@@ -54,6 +59,7 @@ CONFIG_SPL_DM=y
 CONFIG_SYS_I2C_DAVINCI=y
 CONFIG_TI_AEMIF=y
 CONFIG_MISC=y
+CONFIG_SYS_I2C_EEPROM_ADDR=0x50
 # CONFIG_MMC is not set
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
@@ -76,7 +82,7 @@ CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_DAVINCI_SPI=y
 CONFIG_USB=y
-CONFIG_DM_USB=y
+# CONFIG_SPL_DM_USB is not set
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_DWC3=y