configs: visionfive2: Enable MULTI_DTB_FIT for JH7110 based board DT

[J-u-boot.git] / configs / sniper_defconfig

diff --git a/configs/sniper_defconfig b/configs/sniper_defconfig
index bae9b0e2546e0eb752e4224bae7f1dbb2d093ebe..3874b875c82411a017ec2ebfac069ef5f3aa4b85 100644 (file)
--- a/configs/sniper_defconfig
+++ b/configs/sniper_defconfig
@@ -1,44 +1,31 @@
 CONFIG_ARM=y
-# CONFIG_SYS_THUMB_BUILD is not set
 CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_TEXT_BASE=0x80100000
-CONFIG_SYS_MALLOC_LEN=0x120000
-CONFIG_SYS_MALLOC_F_LEN=0x400
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_SPL_TEXT_BASE=0x40200000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_DEFAULT_DEVICE_TREE="ti/omap/omap3-sniper"
 CONFIG_TARGET_SNIPER=y
-CONFIG_SYS_PROMPT="sniper # "
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
 CONFIG_SPL=y
 CONFIG_DISTRO_DEFAULTS=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00
 CONFIG_BOOTCOMMAND="setenv boot_mmc_part ${kernel_mmc_part}; if test reboot-${reboot-mode} = reboot-r; then echo recovery; setenv boot_mmc_part ${recovery_mmc_part}; fi; if test reboot-${reboot-mode} = reboot-b; then echo fastboot; fastboot 0; fi; part start mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_start; part size mmc ${boot_mmc_dev} ${boot_mmc_part} boot_mmc_size; mmc dev ${boot_mmc_dev}; mmc read ${kernel_addr_r} ${boot_mmc_start} ${boot_mmc_size} && bootm ${kernel_addr_r};"
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
-CONFIG_SPL_MAX_SIZE=0xec00
-CONFIG_SPL_BSS_START_ADDR=0x80000000
-# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK=0x4020fffc
-CONFIG_SYS_SPL_MALLOC=y
-CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
-CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80208000
-# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=2
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_SYS_MALLOC=y
+CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
+# CONFIG_SPL_SYS_MMCSD_RAW_MODE is not set
 # CONFIG_SPL_FS_EXT4 is not set
 # CONFIG_SPL_NAND_SUPPORT is not set
-CONFIG_SYS_CBSIZE=512
-CONFIG_SYS_PBSIZE=538
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 # CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NFS is not set
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_OF_UPSTREAM=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SYS_I2C_LEGACY=y
-CONFIG_SPL_SYS_I2C_LEGACY=y
-CONFIG_SYS_I2C_SPEED=400000
+CONFIG_SPL_DM=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
 CONFIG_TWL4030_INPUT=y
 CONFIG_MMC_OMAP_HS=y
-CONFIG_CONS_INDEX=3
-CONFIG_OF_LIBFDT=y