Define tsec flag values in config files

[J-u-boot.git] / include / configs / MPC8313ERDB.h

diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 2519c6b8b528aac1851d3492133a971ea45d7337..f92dce541f859d8eeb03e5263afee59cbfa09d5b 100644 (file)
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -18,14 +18,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
- *
- * History
- * 20061201: Wilson Lo ([email protected])
- *           Initialized
- * 20061210: Tanya Jiang ([email protected])
- *           Code Cleanup
- * 20070410: Scott Wood <[email protected]>
- *           More cleanup
  */
 /*
  * mpc8313epb board configuration file
@@ -47,9 +39,9 @@
 #define CONFIG_83XX_GENERIC_PCI
 
 #ifdef CFG_66MHZ
-#define CONFIG_83XX_CLKIN      66000000        /* in Hz */
+#define CONFIG_83XX_CLKIN      66666667        /* in Hz */
 #elif defined(CFG_33MHZ)
-#define CONFIG_83XX_CLKIN      33000000        /* in Hz */
+#define CONFIG_83XX_CLKIN      33333333        /* in Hz */
 #else
 #error Unknown oscillator frequency.
 #endif
@@ -154,10 +146,10 @@
 #define CFG_FLASH_EMPTY_INFO                   /* display empty sectors */
 #define CFG_FLASH_USE_BUFFER_WRITE             /* buffer up multiple bytes */
 
-#define CFG_BR0_PRELIM         (CFG_FLASH_BASE |    /* flash Base address */ \
-                               (2 << BR_PS_SHIFT) | /* 16 bit port size */ \
-                               BR_V)                /* valid */
-#define CFG_OR0_PRELIM         ( 0xFF000000         /* 16 MByte */ \
+#define CFG_BR0_PRELIM         (CFG_FLASH_BASE |       /* flash Base address */ \
+                               (2 << BR_PS_SHIFT) |    /* 16 bit port size */ \
+                               BR_V)                   /* valid */
+#define CFG_OR0_PRELIM         ( 0xFF000000            /* 16 MByte */ \
                                | OR_GPCM_XACS \
                                | OR_GPCM_SCY_9 \
                                | OR_GPCM_EHTR \
@@ -197,20 +189,20 @@
                        | (0xFF << LBCR_BMT_SHIFT) \
                        | 0xF ) /* 0x0004ff0f */
 
-#define CFG_LBC_MRTPR  0x20000000  /*TODO */  /* LB refresh timer prescal, 266MHz/32 */
+#define CFG_LBC_MRTPR  0x20000000  /*TODO */   /* LB refresh timer prescal, 266MHz/32 */
 
 /* drivers/nand/nand.c */
-#define CFG_NAND_BASE          0xE2800000 /* 0xF0000000 */
+#define CFG_NAND_BASE          0xE2800000      /* 0xF0000000 */
 #define CFG_MAX_NAND_DEVICE    1
 #define NAND_MAX_CHIPS         1
 #define CONFIG_MTD_NAND_VERIFY_WRITE
 
 #define CFG_BR1_PRELIM         ( CFG_NAND_BASE \
-                               | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
-                               | BR_PS_8            /* Port Size = 8 bit */ \
-                               | BR_MS_FCM          /* MSEL = FCM */ \
-                               | BR_V )             /* valid */
-#define CFG_OR1_PRELIM         ( 0xFFFF8000    /* length 32K */ \
+                               | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
+                               | BR_PS_8               /* Port Size = 8 bit */ \
+                               | BR_MS_FCM             /* MSEL = FCM */ \
+                               | BR_V )                /* valid */
+#define CFG_OR1_PRELIM         ( 0xFFFF8000            /* length 32K */ \
                                | OR_FCM_CSCT \
                                | OR_FCM_CST \
                                | OR_FCM_CHT \
@@ -273,7 +265,7 @@
 #define CONFIG_I2C_CMD_TREE
 #define CFG_I2C_SPEED          400000  /* I2C speed and slave address */
 #define CFG_I2C_SLAVE          0x7F
-#define CFG_I2C_NOPROBES       {0x69}  /* Don't probe these addrs */
+#define CFG_I2C_NOPROBES       {{0,0x69}} /* Don't probe these addrs */
 #define CFG_I2C_OFFSET         0x3000
 #define CFG_I2C2_OFFSET                0x3100
 
@@ -311,13 +303,15 @@
 #endif
 
 #define CONFIG_GMII                    1       /* MII PHY management */
-#define CONFIG_MPC83XX_TSEC1           1
+#define CONFIG_TSEC1           1
 
-#define CONFIG_MPC83XX_TSEC1_NAME      "TSEC0"
-#define CONFIG_MPC83XX_TSEC2           1
-#define CONFIG_MPC83XX_TSEC2_NAME      "TSEC1"
+#define CONFIG_TSEC1_NAME      "TSEC0"
+#define CONFIG_TSEC2           1
+#define CONFIG_TSEC2_NAME      "TSEC1"
 #define TSEC1_PHY_ADDR                 0x1c
 #define TSEC2_PHY_ADDR                 4
+#define TSEC1_FLAGS                    TSEC_GIGABIT
+#define TSEC2_FLAGS                    TSEC_GIGABIT
 #define TSEC1_PHYIDX                   0
 #define TSEC2_PHYIDX                   0
 
@@ -349,26 +343,34 @@
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
 #define CFG_LOADS_BAUD_CHANGE  1       /* allow baudrate change */
 
-#define CFG_BASE_COMMANDS      ( CONFIG_CMD_DFL        \
-                               | CFG_CMD_PING          \
-                               | CFG_CMD_DHCP          \
-                               | CFG_CMD_I2C           \
-                               | CFG_CMD_MII           \
-                               | CFG_CMD_DATE          \
-                               | CFG_CMD_PCI)
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
 
-#define CONFIG_CMDLINE_EDITING 1
 
-#define CFG_RAMBOOT_COMMANDS   (CFG_BASE_COMMANDS & \
-                                ~(CFG_CMD_ENV | CFG_CMD_LOADS))
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_PCI
 
 #if defined(CFG_RAMBOOT)
-#define CONFIG_COMMANDS CFG_RAMBOOT_COMMANDS
-#else
-#define CONFIG_COMMANDS CFG_BASE_COMMANDS
+    #undef CONFIG_CMD_ENV
+    #undef CONFIG_CMD_LOADS
 #endif
 
-#include <cmd_confdefs.h>
+#define CONFIG_CMDLINE_EDITING 1
+
 
 /*
  * Miscellaneous configurable options
@@ -378,7 +380,7 @@
 #define CFG_PROMPT     "=> "           /* Monitor Command Prompt */
 #define CFG_CBSIZE     1024            /* Console I/O Buffer Size */
 
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16)  /* Print Buffer Size */
 #define CFG_MAXARGS    16              /* max number of command args */
 #define CFG_BARGSIZE   CFG_CBSIZE      /* Boot Argument Buffer Size */
 #define CFG_HZ         1000            /* decrementer freq: 1ms ticks */
@@ -395,7 +397,7 @@
 #define CFG_CACHELINE_SIZE     32
 #define CFG_CACHELINE_SHIFT    5       /*log base 2 of the above value*/
 
-#define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST  */
+#define CFG_RCWH_PCIHOST 0x80000000    /* PCIHOST  */
 
 #ifdef CFG_66MHZ
 
@@ -439,12 +441,12 @@
        HRCWH_LALE_NORMAL)
 
 /* System IO Config */
-#define CFG_SICRH      (SICRH_TSOBI1 | SICRH_TSOBI2) /* RGMII */
-#define CFG_SICRL      SICRL_USBDR /* Enable Internal USB Phy  */
+#define CFG_SICRH      (SICRH_TSOBI1 | SICRH_TSOBI2)   /* RGMII */
+#define CFG_SICRL      SICRL_USBDR                     /* Enable Internal USB Phy  */
 
 #define CFG_HID0_INIT  0x000000000
 #define CFG_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \
-                         HID0_ENABLE_DYNAMIC_POWER_MANAGMENT)
+                        HID0_ENABLE_DYNAMIC_POWER_MANAGMENT)
 
 #define CFG_HID2 HID2_HBE