VERSION = 2015
-PATCHLEVEL = 01
+PATCHLEVEL = 07
SUBLEVEL =
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc1
NAME =
# *DOCUMENTATION*
HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc")
HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp")
HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
+
+# since Lion (10.7) ASLR is on by default, but we use linker generated lists
+# in some host tools which is a problem then ... so disable ASLR for these
+# tools
+HOSTLDFLAGS += $(call os_x_before, 10, 7, "", "-Xlinker -no_pie")
endif
# Decide whether to build built-in, modular, or both.
export KBUILD_DEFCONFIG KBUILD_KCONFIG
config: scripts_basic outputmakefile FORCE
- +$(Q)$(CONFIG_SHELL) $(srctree)/scripts/multiconfig.sh $@
+ $(Q)$(MAKE) $(build)=scripts/kconfig $@
%config: scripts_basic outputmakefile FORCE
- +$(Q)$(CONFIG_SHELL) $(srctree)/scripts/multiconfig.sh $@
+ $(Q)$(MAKE) $(build)=scripts/kconfig $@
else
# ===========================================================================
# we execute the config step to be sure to catch updated Kconfig files
include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
$(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
+ @# If the following part fails, include/config/auto.conf should be
+ @# deleted so "make silentoldconfig" will be re-run on the next build.
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf || \
+ { rm -f include/config/auto.conf; false; }
+ @# include/config.h has been updated after "make silentoldconfig".
+ @# We need to touch include/config/auto.conf so it gets newer
+ @# than include/config.h.
+ @# Otherwise, 'make silentoldconfig' would be invoked twice.
+ $(Q)touch include/config/auto.conf
-include include/autoconf.mk
-include include/autoconf.mk.dep
# is up-to-date. When we switch to a different board configuration, old CONFIG
# macros are still remaining in include/config/auto.conf. Without the following
# gimmick, wrong config.mk would be included leading nasty warnings/errors.
-autoconf_is_current := $(if $(wildcard $(KCONFIG_CONFIG)),$(shell find . \
- -path ./include/config/auto.conf -newer $(KCONFIG_CONFIG)))
-ifneq ($(autoconf_is_current),)
+ifneq ($(wildcard $(KCONFIG_CONFIG)),)
+ifneq ($(wildcard include/config/auto.conf),)
+autoconf_is_old := $(shell find . -path ./$(KCONFIG_CONFIG) -newer \
+ include/config/auto.conf)
+ifeq ($(autoconf_is_old),)
include $(srctree)/config.mk
include $(srctree)/arch/$(ARCH)/Makefile
endif
+endif
+endif
# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
# that (or fail if absent). Otherwise, search for a linker script in a
drivers/power/fuel_gauge/ \
drivers/power/mfd/ \
drivers/power/pmic/ \
- drivers/power/battery/
+ drivers/power/battery/ \
+ drivers/power/regulator/
libs-y += drivers/spi/
libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
libs-y += drivers/serial/
+libs-y += drivers/usb/dwc3/
+libs-y += drivers/usb/emul/
libs-y += drivers/usb/eth/
libs-y += drivers/usb/gadget/
+libs-y += drivers/usb/gadget/udc/
libs-y += drivers/usb/host/
libs-y += drivers/usb/musb/
libs-y += drivers/usb/musb-new/
endif
# Always append ALL so that arch config.mk's can add custom ones
-ALL-y += u-boot.srec u-boot.bin System.map binary_size_check
+ALL-y += u-boot.srec u-boot.bin System.map u-boot.cfg binary_size_check
ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
ifeq ($(CONFIG_SPL_FSL_PBL),y)
endif
ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf
-# We can't do this yet due to the need for binary blobs
-# ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
+ifneq ($(BUILD_ROM),)
+ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
+endif
# enable combined SPL/u-boot/dtb rules for tegra
ifneq ($(CONFIG_TEGRA),)
@echo "See doc/README.generic-board for further information"
@echo "===================================================="
endif
+ifeq ($(CONFIG_DM_I2C_COMPAT),y)
+ @echo "===================== WARNING ======================"
+ @echo "This board uses CONFIG_DM_I2C_COMPAT. Please remove"
+ @echo "(possibly in a subsequent patch in your series)"
+ @echo "before sending patches to the mailing list."
+ @echo "===================================================="
+endif
PHONY += dtbs
dtbs dts/dt.dtb: checkdtc u-boot
CONFIG_SYS_UBOOT_START := 0
endif
+# Create a file containing the configuration options the image was built with
+quiet_cmd_cpp_cfg = CFG $@
+cmd_cpp_cfg = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
+ -D__ASSEMBLY__ -x assembler-with-cpp -P -dM -E -o $@ $<
+
MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
MKIMAGEFLAGS_u-boot.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
-T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
+MKIMAGEFLAGS_u-boot-spl.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
+ -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
+
MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
-R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
u-boot.img u-boot.kwb u-boot.pbl: u-boot.bin FORCE
$(call if_changed,mkimage)
+u-boot-spl.kwb: u-boot.img spl/u-boot-spl.bin FORCE
+ $(call if_changed,mkimage)
+
MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
u-boot-dtb.img: u-boot-dtb.bin FORCE
u-boot.dis: u-boot
$(OBJDUMP) -d $< > $@
+u-boot.cfg: include/config.h
+ $(call if_changed,cpp_cfg)
+
ifdef CONFIG_TPL
SPL_PAYLOAD := tpl/u-boot-with-tpl.bin
else
u-boot-with-spl.bin: spl/u-boot-spl.bin $(SPL_PAYLOAD) FORCE
$(call if_changed,pad_cat)
+MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
+
+lpc32xx-spl.img: spl/u-boot-spl.bin FORCE
+ $(call if_changed,mkimage)
+
+OBJCOPYFLAGS_lpc32xx-boot-0.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
+
+lpc32xx-boot-0.bin: lpc32xx-spl.img
+ $(call if_changed,objcopy)
+
+OBJCOPYFLAGS_lpc32xx-boot-1.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
+
+lpc32xx-boot-1.bin: lpc32xx-spl.img
+ $(call if_changed,objcopy)
+
+lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img
+ $(call if_changed,cat)
+
+CLEAN_FILES += lpc32xx-*
+
OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
--pad-to=$(CONFIG_TPL_PAD_TO)
tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
ifneq ($(CONFIG_X86_RESET_VECTOR),)
rom: u-boot.rom FORCE
-u-boot.rom: u-boot-x86-16bit.bin u-boot-dtb.bin \
- $(srctree)/board/$(BOARDDIR)/mrc.bin
- $(objtree)/tools/ifdtool -c -r $(CONFIG_ROM_SIZE) u-boot.tmp
- if [ -n "$(CONFIG_HAVE_INTEL_ME)" ]; then \
- $(objtree)/tools/ifdtool -D \
- $(srctree)/board/$(BOARDDIR)/descriptor.bin u-boot.tmp; \
- $(objtree)/tools/ifdtool \
- -i ME:$(srctree)/board/$(BOARDDIR)/me.bin u-boot.tmp; \
- fi
- $(objtree)/tools/ifdtool -w \
- $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot-dtb.bin u-boot.tmp
- $(objtree)/tools/ifdtool -w \
- $(CONFIG_X86_MRC_START):$(srctree)/board/$(BOARDDIR)/mrc.bin \
- u-boot.tmp
- $(objtree)/tools/ifdtool -w \
- $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin \
- u-boot.tmp
- $(objtree)/tools/ifdtool -w \
- $(CONFIG_X86_OPTION_ROM_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_X86_OPTION_ROM_FILENAME) \
- u-boot.tmp
- mv u-boot.tmp $@
+IFDTOOL=$(objtree)/tools/ifdtool
+IFDTOOL_FLAGS = -f 0:$(objtree)/u-boot.dtb
+IFDTOOL_FLAGS += -m 0x$(shell $(NM) u-boot |grep _dt_ucode_base_size |cut -d' ' -f1)
+IFDTOOL_FLAGS += -U $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot.bin
+IFDTOOL_FLAGS += -w $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin
+
+ifneq ($(CONFIG_HAVE_INTEL_ME),)
+IFDTOOL_ME_FLAGS = -D $(srctree)/board/$(BOARDDIR)/descriptor.bin
+IFDTOOL_ME_FLAGS += -i ME:$(srctree)/board/$(BOARDDIR)/me.bin
+endif
+
+ifneq ($(CONFIG_HAVE_MRC),)
+IFDTOOL_FLAGS += -w $(CONFIG_X86_MRC_ADDR):$(srctree)/board/$(BOARDDIR)/mrc.bin
+endif
+
+ifneq ($(CONFIG_HAVE_FSP),)
+IFDTOOL_FLAGS += -w $(CONFIG_FSP_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_FSP_FILE)
+endif
+
+ifneq ($(CONFIG_HAVE_CMC),)
+IFDTOOL_FLAGS += -w $(CONFIG_CMC_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_CMC_FILE)
+endif
+
+ifneq ($(CONFIG_X86_OPTION_ROM_ADDR),)
+IFDTOOL_FLAGS += -w $(CONFIG_X86_OPTION_ROM_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_X86_OPTION_ROM_FILE)
+endif
+
+quiet_cmd_ifdtool = IFDTOOL $@
+cmd_ifdtool = $(IFDTOOL) -c -r $(CONFIG_ROM_SIZE) u-boot.tmp;
+ifneq ($(CONFIG_HAVE_INTEL_ME),)
+cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_ME_FLAGS) u-boot.tmp;
+endif
+cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_FLAGS) u-boot.tmp;
+cmd_ifdtool += mv u-boot.tmp $@
+
+u-boot.rom: u-boot-x86-16bit.bin u-boot-dtb.bin
+ $(call if_changed,ifdtool)
OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec
u-boot-x86-16bit.bin: u-boot FORCE
spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE
$(call if_changed,mkimage)
+ifeq ($(ARCH),arm)
+UBOOT_BINLOAD := u-boot.img
+else
+UBOOT_BINLOAD := u-boot.bin
+endif
+
OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
--gap-fill=0xff
-u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl u-boot.bin FORCE
+u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE
$(call if_changed,pad_cat)
# PPC4xx needs the SPL at the end of the image, since the reset vector
prepare1: prepare2 $(version_h) $(timestamp_h) \
include/config/auto.conf
-ifeq ($(__HAVE_ARCH_GENERIC_BOARD),)
+ifeq ($(CONFIG_HAVE_GENERIC_BOARD),)
ifeq ($(CONFIG_SYS_GENERIC_BOARD),y)
@echo >&2 " Your architecture does not support generic board."
@echo >&2 " Please undefine CONFIG_SYS_GENERIC_BOARD in your board config file."
tags ctags:
ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
-name '*.[chS]' -print`
+ ln -s ctags tags
etags:
etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
$(filter-out include, $(shell ls -1 $d 2>/dev/null))))
CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h \
- u-boot* MLO* SPL System.map
+ boot* u-boot* MLO* SPL System.map
# Directories & files removed with 'make mrproper'
MRPROPER_DIRS += include/config include/generated spl tpl \
projects / J-u-boot.git / blobdiff