configs: stm32mp1: Restore boot SPL from sdcard for Engicam i.Core STM32MP1 C.TOUCH 2.0

[J-u-boot.git] / configs / corvus_defconfig

diff --git a/configs/corvus_defconfig b/configs/corvus_defconfig
index 3f057302dd18cc404fa79a97dfd01ab9152a3391..ce2f4f7d91e4b21f41a040c62ee73cf5f60949b8 100644 (file)
--- a/configs/corvus_defconfig
+++ b/configs/corvus_defconfig
@@ -18,12 +18,15 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
 CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x70007f00
 CONFIG_ENV_OFFSET=0x100000
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9g45-corvus"
-CONFIG_SPL_TEXT_BASE=0x300000
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_STACK=0x4000
+CONFIG_SPL_TEXT_BASE=0x300000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x3000
+CONFIG_SPL_BSS_MAX_SIZE=0x800
+CONFIG_SYS_LOAD_ADDR=0x70000000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x180000
-CONFIG_SYS_LOAD_ADDR=0x70000000
 CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
@@ -36,9 +39,6 @@ CONFIG_SYS_PBSIZE=281
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_MAX_SIZE=0x3000
 CONFIG_SPL_PAD_TO=0x20000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x3000
-CONFIG_SPL_BSS_MAX_SIZE=0x800
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
 CONFIG_SPL_NAND_SUPPORT=y
@@ -59,8 +59,8 @@ CONFIG_CMD_NAND=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SOURCE is not set
 # CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
 CONFIG_BOOTP_BOOTFILESIZE=y
+CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_MTDPARTS=y
 CONFIG_DOS_PARTITION=y