Merge branch 'master' of git://git.denx.de/u-boot-uniphier

[J-u-boot.git] / include / configs / TQM850M.h

diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h
index 2170df5dcb11617fa64b2efd3d68b6361c1943d1..166bb2c6c04b3f2d6f524c2980a1efc53e8321a0 100644 (file)
--- a/include/configs/TQM850M.h
+++ b/include/configs/TQM850M.h
@@ -1,24 +1,8 @@
 /*
- * (C) Copyright 2000-2008
+ * (C) Copyright 2000-2014
  * Wolfgang Denk, DENX Software Engineering, [email protected].
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -35,14 +19,20 @@
 
 #define CONFIG_MPC850          1       /* This is a MPC850 CPU         */
 #define CONFIG_TQM850M         1       /* ...on a TQM8xxM module       */
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define        CONFIG_SYS_TEXT_BASE    0x40000000
 
 #define        CONFIG_8xx_CONS_SMC1    1       /* Console is on SMC1           */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
+#define CONFIG_SYS_SMC_RXBUFLEN        128
+#define CONFIG_SYS_MAXIDLE     10
 #define CONFIG_BAUDRATE                115200  /* console baudrate = 115kbps   */
 
 #define        CONFIG_BOOTCOUNT_LIMIT
 
+#define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds     */
+
 #define CONFIG_BOARD_TYPES     1       /* support board types          */
 
 #define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
@@ -104,8 +94,6 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
@@ -113,7 +101,6 @@
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_IDE
 #define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_NFS
 #define CONFIG_CMD_SNTP
 
 
@@ -124,13 +111,9 @@
  * Miscellaneous configurable options
  */
 #define        CONFIG_SYS_LONGHELP                     /* undef to save memory         */
-#define        CONFIG_SYS_PROMPT               "=> "   /* Monitor Command Prompt       */
 
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
 #define CONFIG_SYS_HUSH_PARSER         1       /* Use the HUSH parser          */
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define        CONFIG_SYS_PROMPT_HUSH_PS2      "> "
-#endif
 
 #if defined(CONFIG_CMD_KGDB)
 #define        CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size      */
@@ -146,10 +129,6 @@
 
 #define        CONFIG_SYS_LOAD_ADDR            0x100000        /* default load address */
 
-#define        CONFIG_SYS_HZ                   1000    /* decrementer freq: 1 ms ticks */
-
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
 /*
  * Low Level Configuration Settings
  * (address mappings, register initial values, etc.)
@@ -164,9 +143,8 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_IMMR
-#define        CONFIG_SYS_INIT_RAM_END 0x2F00  /* End of used area in DPRAM    */
-#define        CONFIG_SYS_GBL_DATA_SIZE        64  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define        CONFIG_SYS_INIT_RAM_SIZE        0x2F00  /* Size of used area in DPRAM   */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define        CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -324,6 +302,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT     1       /* Use preinit IDE hook */
 #define        CONFIG_IDE_8xx_PCCARD   1       /* Use IDE with PC Card Adapter */
 
 #undef CONFIG_IDE_8xx_DIRECT           /* Direct IDE    not supported  */
@@ -466,13 +445,9 @@
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH     */
-#define BOOTFLAG_WARM  0x02            /* Software reboot                      */
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT       1
+#define CONFIG_OF_BOARD_SETUP  1
+#define CONFIG_HWCONFIG                1
 
 #endif /* __CONFIG_H */