freescale: ls1043aqds: enable secure system counter

[J-u-boot.git] / configs / colibri-imx6ull_defconfig

diff --git a/configs/colibri-imx6ull_defconfig b/configs/colibri-imx6ull_defconfig
index e1842237730322699e6e66b6962bcb5d56d58620..ce145cd24f7413e46e6461ce549282c94f27ab61 100644 (file)
--- a/configs/colibri-imx6ull_defconfig
+++ b/configs/colibri-imx6ull_defconfig
@@ -1,8 +1,10 @@
 CONFIG_ARM=y
-CONFIG_SYS_THUMB_BUILD=y
 CONFIG_ARCH_MX6=y
 CONFIG_SYS_TEXT_BASE=0x87800000
+CONFIG_ENV_SIZE=0x20000
+CONFIG_ENV_OFFSET=0x380000
 CONFIG_TARGET_COLIBRI_IMX6ULL=y
+CONFIG_DM_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
@@ -16,12 +18,16 @@ CONFIG_VERSION_VARIABLE=y
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_BOUNCE_BUFFER=y
 CONFIG_SYS_PROMPT="Colibri iMX6ULL # "
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
 # CONFIG_CMD_ELF is not set
 # CONFIG_CMD_IMI is not set
 # CONFIG_CMD_XIMG is not set
 CONFIG_CMD_ASKENV=y
 CONFIG_CRC32_VERIFY=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_MEMTEST_START=0x80000000
+CONFIG_SYS_MEMTEST_END=0x88000000
 CONFIG_CMD_DFU=y
 CONFIG_CMD_DM=y
 CONFIG_CMD_GPIO=y
@@ -34,6 +40,7 @@ CONFIG_CMD_USB=y
 CONFIG_CMD_USB_SDP=y
 CONFIG_CMD_USB_MASS_STORAGE=y
 CONFIG_CMD_BMP=y
+CONFIG_CMD_BOOTCOUNT=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_REGULATOR=y
 CONFIG_CMD_MTDPARTS=y
@@ -44,17 +51,21 @@ CONFIG_CMD_UBI=y
 CONFIG_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="imx6ull-colibri"
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_IP_DEFRAG=y
 CONFIG_TFTP_BLOCKSIZE=16352
+CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_ENV=y
 CONFIG_DFU_NAND=y
-CONFIG_DM_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_MXC=y
 CONFIG_DM_MMC=y
-CONFIG_FSL_ESDHC_IMX=y
+CONFIG_FSL_USDHC=y
 CONFIG_MTD=y
-CONFIG_NAND=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_SYS_NAND_USE_FLASH_BBT=y
 CONFIG_NAND_MXS=y
 CONFIG_NAND_MXS_DT=y
 CONFIG_MTD_UBI_FASTMAP=y
@@ -67,7 +78,6 @@ CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y
 CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
-# CONFIG_SPL_SERIAL_PRESENT is not set
 CONFIG_DM_SERIAL=y
 CONFIG_MXC_UART=y
 CONFIG_USB=y