board: sl28: fix network on variant 3

[J-u-boot.git] / configs / mx6ull_14x14_evk_plugin_defconfig

diff --git a/configs/mx6ull_14x14_evk_plugin_defconfig b/configs/mx6ull_14x14_evk_plugin_defconfig
index 2700f98e6c6a8d17b2d99025867d86f236f2d4b9..8be5963a4336c1d2db364e3eb31f371fb2486554 100644 (file)
--- a/configs/mx6ull_14x14_evk_plugin_defconfig
+++ b/configs/mx6ull_14x14_evk_plugin_defconfig
@@ -1,9 +1,9 @@
 CONFIG_ARM=y
 CONFIG_ARCH_MX6=y
-CONFIG_SYS_TEXT_BASE=0x87800000
+CONFIG_TEXT_BASE=0x87800000
+CONFIG_SYS_MALLOC_LEN=0x1000000
 CONFIG_NR_DRAM_BANKS=1
-CONFIG_SYS_MEMTEST_START=0x80000000
-CONFIG_SYS_MEMTEST_END=0x88000000
+CONFIG_SF_DEFAULT_SPEED=40000000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0xC0000
 CONFIG_MX6ULL=y
@@ -11,10 +11,16 @@ CONFIG_TARGET_MX6ULL_14X14_EVK=y
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="imx6ull-14x14-evk"
 CONFIG_USE_IMXIMG_PLUGIN=y
+CONFIG_SYS_MEMTEST_START=0x80000000
+CONFIG_SYS_MEMTEST_END=0x88000000
 CONFIG_SUPPORT_RAW_INITRD=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6ullevk/imximage.cfg"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run findfdt;mmc dev ${mmcdev};mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi"
+CONFIG_SYS_PBSIZE=532
+CONFIG_ARCH_MISC_INIT=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_HUSH_PARSER=y
+CONFIG_SYS_MAXARGS=32
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_GPIO=y
@@ -23,6 +29,7 @@ CONFIG_CMD_MMC=y
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_CACHE=y
+CONFIG_CMD_RNG=y
 CONFIG_CMD_EXT2=y
 CONFIG_CMD_EXT4=y
 CONFIG_CMD_EXT4_WRITE=y
@@ -34,27 +41,31 @@ CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_SYS_MMC_ENV_DEV=1
 CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_USE_ETHPRIME=y
+CONFIG_ETHPRIME="eth1"
 CONFIG_BOUNCE_BUFFER=y
+CONFIG_FSL_DCP_RNG=y
 CONFIG_DM_74X164=y
 CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_MXC=y
 CONFIG_FSL_USDHC=y
 CONFIG_MTD=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=40000000
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_PHYLIB=y
 CONFIG_PHY_MICREL=y
 CONFIG_PHY_MICREL_KSZ8XXX=y
-CONFIG_DM_ETH=y
 CONFIG_DM_ETH_PHY=y
 CONFIG_FEC_MXC=y
 CONFIG_MII=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_IMX6=y
 CONFIG_DM_REGULATOR=y
+CONFIG_DM_RNG=y
+CONFIG_DM_SERIAL=y
 CONFIG_MXC_UART=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_QSPI=y
+CONFIG_SOFT_SPI=y
 CONFIG_IMX_THERMAL=y