# This Dockerfile is used to build an image containing basic stuff to be used
# to build U-Boot and run our test suites.
-FROM ubuntu:focal-20210723
+FROM ubuntu:jammy-20230308
LABEL Description=" This image is for building U-Boot inside a container"
# Add LLVM repository
RUN apt-get update && apt-get install -y gnupg2 wget xz-utils && rm -rf /var/lib/apt/lists/*
RUN wget -O - https://apt.llvm.org/llvm-snapshot.gpg.key | apt-key add -
-RUN echo deb http://apt.llvm.org/focal/ llvm-toolchain-focal-12 main | tee /etc/apt/sources.list.d/llvm.list
-
-# Manually install the kernel.org "Crosstool" based toolchains for gcc-11.1.0
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/11.1.0/x86_64-gcc-11.1.0-nolibc-aarch64-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/11.1.0/x86_64-gcc-11.1.0-nolibc-arm-linux-gnueabi.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/11.1.0/x86_64-gcc-11.1.0-nolibc-i386-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/11.1.0/x86_64-gcc-11.1.0-nolibc-m68k-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/11.1.0/x86_64-gcc-11.1.0-nolibc-mips-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/11.1.0/x86_64-gcc-11.1.0-nolibc-microblaze-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/11.1.0/x86_64-gcc-11.1.0-nolibc-nios2-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/11.1.0/x86_64-gcc-11.1.0-nolibc-powerpc-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/11.1.0/x86_64-gcc-11.1.0-nolibc-riscv64-linux.tar.xz | tar -C /opt -xJ
-RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/11.1.0/x86_64-gcc-11.1.0-nolibc-sh2-linux.tar.xz | tar -C /opt -xJ
+RUN echo deb http://apt.llvm.org/jammy/ llvm-toolchain-jammy-14 main | tee /etc/apt/sources.list.d/llvm.list
+
+# Manually install the kernel.org "Crosstool" based toolchains for gcc-12.2.0
+RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/12.2.0/x86_64-gcc-12.2.0-nolibc-aarch64-linux.tar.xz | tar -C /opt -xJ
+RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/12.2.0/x86_64-gcc-12.2.0-nolibc-arm-linux-gnueabi.tar.xz | tar -C /opt -xJ
+RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/12.2.0/x86_64-gcc-12.2.0-nolibc-i386-linux.tar.xz | tar -C /opt -xJ
+RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/12.2.0/x86_64-gcc-12.2.0-nolibc-m68k-linux.tar.xz | tar -C /opt -xJ
+RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/12.2.0/x86_64-gcc-12.2.0-nolibc-mips-linux.tar.xz | tar -C /opt -xJ
+RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/12.2.0/x86_64-gcc-12.2.0-nolibc-microblaze-linux.tar.xz | tar -C /opt -xJ
+RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/12.2.0/x86_64-gcc-12.2.0-nolibc-nios2-linux.tar.xz | tar -C /opt -xJ
+RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/12.2.0/x86_64-gcc-12.2.0-nolibc-powerpc-linux.tar.xz | tar -C /opt -xJ
+RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/12.2.0/x86_64-gcc-12.2.0-nolibc-riscv64-linux.tar.xz | tar -C /opt -xJ
+RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/12.2.0/x86_64-gcc-12.2.0-nolibc-riscv32-linux.tar.xz | tar -C /opt -xJ
+RUN wget -O - https://mirrors.edge.kernel.org/pub/tools/crosstool/files/bin/x86_64/12.2.0/x86_64-gcc-12.2.0-nolibc-sh2-linux.tar.xz | tar -C /opt -xJ
# Manually install other toolchains
RUN wget -O - https://github.com/foss-xtensa/toolchain/releases/download/2020.07/x86_64-2020.07-xtensa-dc233c-elf.tar.gz | tar -C /opt -xz
RUN wget -O - https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/download/arc-2021.03-release/arc_gnu_2021.03_prebuilt_uclibc_le_archs_linux_install.tar.gz | tar --no-same-owner -C /opt -xz
-RUN wget -O - https://github.com/vincentzwc/prebuilt-nds32-toolchain/releases/download/20180521/nds32le-linux-glibc-v3-upstream.tar.gz | tar -C /opt -xz
# Update and install things from apt now
RUN apt-get update && apt-get install -y \
binutils-dev \
bison \
build-essential \
- clang-12 \
+ clang-14 \
coreutils \
cpio \
cppcheck \
dosfstools \
e2fsprogs \
efitools \
+ erofs-utils \
+ expect \
fakeroot \
flex \
+ gawk \
gdisk \
git \
gnu-efi \
+ gnutls-dev \
graphviz \
grub-efi-amd64-bin \
grub-efi-ia32-bin \
iasl \
imagemagick \
iputils-ping \
+ libc6-i386 \
+ libconfuse-dev \
libgit2-dev \
+ libjson-glib-dev \
libguestfs-tools \
+ libgnutls28-dev \
+ libgnutls30 \
liblz4-tool \
libpixman-1-dev \
libpython3-dev \
libsdl1.2-dev \
libsdl2-dev \
+ libseccomp-dev \
libssl-dev \
+ libtool \
libudev-dev \
libusb-1.0-0-dev \
linux-image-kvm \
mount \
mtd-utils \
mtools \
+ net-tools \
+ ninja-build \
openssl \
picocom \
parted \
python3 \
python3-dev \
python3-pip \
+ python3-pyelftools \
python3-sphinx \
python3-virtualenv \
rpm2cpio \
sbsigntool \
sloccount \
+ socat \
+ softhsm2 \
sparse \
srecord \
sudo \
swig \
+ texinfo \
util-linux \
uuid-dev \
virtualenv \
# Make kernels readable for libguestfs tools to work correctly
RUN chmod +r /boot/vmlinu*
-# Manually install a new enough version of sbsigntools (must be v0.9.4 or later)
-RUN git clone https://git.kernel.org/pub/scm/linux/kernel/git/jejb/sbsigntools.git /tmp/sbsigntools && \
- cd /tmp/sbsigntools && \
- git checkout -b latest v0.9.4 && \
- ./autogen.sh && \
- ./configure && \
- make && \
- make install && \
- rm -rf /tmp/sbsigntools
-
# Build GRUB UEFI targets for ARM & RISC-V, 32-bit and 64-bit
RUN git clone git://git.savannah.gnu.org/grub.git /tmp/grub && \
cd /tmp/grub && \
git checkout grub-2.06 && \
+ git config --global user.name "GitLab CI Runner" && \
+ git cherry-pick 049efdd72eb7baa7b2bf8884391ee7fe650da5a0 && \
./bootstrap && \
mkdir -p /opt/grub && \
./configure --target=aarch64 --with-platform=efi \
CC=gcc \
- TARGET_CC=/opt/gcc-11.1.0-nolibc/aarch64-linux/bin/aarch64-linux-gcc \
- TARGET_OBJCOPY=/opt/gcc-11.1.0-nolibc/aarch64-linux/bin/aarch64-linux-objcopy \
- TARGET_STRIP=/opt/gcc-11.1.0-nolibc/aarch64-linux/bin/aarch64-linux-strip \
- TARGET_NM=/opt/gcc-11.1.0-nolibc/aarch64-linux/bin/aarch64-linux-nm \
- TARGET_RANLIB=/opt/gcc-11.1.0-nolibc/aarch64-linux/bin/aarch64-linux-ranlib && \
+ TARGET_CC=/opt/gcc-12.2.0-nolibc/aarch64-linux/bin/aarch64-linux-gcc \
+ TARGET_OBJCOPY=/opt/gcc-12.2.0-nolibc/aarch64-linux/bin/aarch64-linux-objcopy \
+ TARGET_STRIP=/opt/gcc-12.2.0-nolibc/aarch64-linux/bin/aarch64-linux-strip \
+ TARGET_NM=/opt/gcc-12.2.0-nolibc/aarch64-linux/bin/aarch64-linux-nm \
+ TARGET_RANLIB=/opt/gcc-12.2.0-nolibc/aarch64-linux/bin/aarch64-linux-ranlib && \
make && \
./grub-mkimage -O arm64-efi -o /opt/grub/grubaa64.efi --prefix= -d \
grub-core cat chain configfile echo efinet ext2 fat halt help linux \
make clean && \
./configure --target=arm --with-platform=efi \
CC=gcc \
- TARGET_CC=/opt/gcc-11.1.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-gcc \
- TARGET_OBJCOPY=/opt/gcc-11.1.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-objcopy \
- TARGET_STRIP=/opt/gcc-11.1.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-strip \
- TARGET_NM=/opt/gcc-11.1.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-nm \
- TARGET_RANLIB=/opt/gcc-11.1.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-ranlib && \
+ TARGET_CC=/opt/gcc-12.2.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-gcc \
+ TARGET_OBJCOPY=/opt/gcc-12.2.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-objcopy \
+ TARGET_STRIP=/opt/gcc-12.2.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-strip \
+ TARGET_NM=/opt/gcc-12.2.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-nm \
+ TARGET_RANLIB=/opt/gcc-12.2.0-nolibc/arm-linux-gnueabi/bin/arm-linux-gnueabi-ranlib && \
make && \
./grub-mkimage -O arm-efi -o /opt/grub/grubarm.efi --prefix= -d \
grub-core cat chain configfile echo efinet ext2 fat halt help linux \
make clean && \
./configure --target=riscv64 --with-platform=efi \
CC=gcc \
- TARGET_CC=/opt/gcc-11.1.0-nolibc/riscv64-linux/bin/riscv64-linux-gcc \
- TARGET_OBJCOPY=/opt/gcc-11.1.0-nolibc/riscv64-linux/bin/riscv64-linux-objcopy \
- TARGET_STRIP=/opt/gcc-11.1.0-nolibc/riscv64-linux/bin/riscv64-linux-strip \
- TARGET_NM=/opt/gcc-11.1.0-nolibc/riscv64-linux/bin/riscv64-linux-nm \
- TARGET_RANLIB=/opt/gcc-11.1.0-nolibc/riscv64-linux/bin/riscv64-linux-ranlib && \
+ TARGET_CC=/opt/gcc-12.2.0-nolibc/riscv64-linux/bin/riscv64-linux-gcc \
+ TARGET_OBJCOPY=/opt/gcc-12.2.0-nolibc/riscv64-linux/bin/riscv64-linux-objcopy \
+ TARGET_STRIP=/opt/gcc-12.2.0-nolibc/riscv64-linux/bin/riscv64-linux-strip \
+ TARGET_NM=/opt/gcc-12.2.0-nolibc/riscv64-linux/bin/riscv64-linux-nm \
+ TARGET_RANLIB=/opt/gcc-12.2.0-nolibc/riscv64-linux/bin/riscv64-linux-ranlib && \
make && \
./grub-mkimage -O riscv64-efi -o /opt/grub/grubriscv64.efi --prefix= -d \
grub-core cat chain configfile echo efinet ext2 fat halt help linux \
true && \
rm -rf /tmp/grub
-RUN git clone git://git.qemu.org/qemu.git /tmp/qemu && \
+RUN git clone https://gitlab.com/qemu-project/qemu.git /tmp/qemu && \
cd /tmp/qemu && \
git submodule update --init dtc && \
- git checkout v4.2.0 && \
- ./configure --prefix=/opt/qemu --target-list="aarch64-softmmu,arm-softmmu,i386-softmmu,mips-softmmu,mips64-softmmu,mips64el-softmmu,mipsel-softmmu,ppc-softmmu,riscv32-softmmu,riscv64-softmmu,sh4-softmmu,x86_64-softmmu,xtensa-softmmu" && \
+ git checkout v6.1.0 && \
+ # config user.name and user.email to make 'git am' happy
+ git config user.name u-boot && \
+ # manually apply the bug fix for QEMU 6.1.0 Xilinx Zynq UART emulation codes
+ wget -O - http://patchwork.ozlabs.org/project/qemu-devel/patch/
[email protected]/mbox/ | git am && \
+ ./configure --prefix=/opt/qemu --target-list="aarch64-softmmu,arm-softmmu,i386-softmmu,m68k-softmmu,mips-softmmu,mips64-softmmu,mips64el-softmmu,mipsel-softmmu,ppc-softmmu,riscv32-softmmu,riscv64-softmmu,sh4-softmmu,x86_64-softmmu,xtensa-softmmu" && \
make -j$(nproc) all install && \
rm -rf /tmp/qemu
+# Build QEMU supporting Nokia n900 emulation
+RUN mkdir -p /opt/nokia && \
+ cd /tmp && \
+ git clone https://git.linaro.org/qemu/qemu-linaro.git && \
+ cd /tmp/qemu-linaro && \
+ git checkout 8f8d8e0796efe1a6f34cdd83fb798f3c41217ec1 && \
+ ./configure --enable-system --target-list=arm-softmmu \
+ --python=/usr/bin/python2.7 --disable-sdl --disable-gtk \
+ --disable-curses --audio-drv-list= --audio-card-list= \
+ --disable-werror --disable-xen --disable-xen-pci-passthrough \
+ --disable-brlapi --disable-vnc --disable-curl --disable-slirp \
+ --disable-kvm --disable-user --disable-linux-user --disable-bsd-user \
+ --disable-guest-base --disable-uuid --disable-vde --disable-linux-aio \
+ --disable-cap-ng --disable-attr --disable-blobs --disable-docs \
+ --disable-spice --disable-libiscsi --disable-smartcard-nss \
+ --disable-usb-redir --disable-guest-agent --disable-seccomp \
+ --disable-glusterfs --disable-nptl --disable-fdt && \
+ make -j$(nproc) && \
+ cp /tmp/qemu-linaro/arm-softmmu/qemu-system-arm /opt/nokia && \
+ rm -rf /tmp/qemu-linaro
+
+# Build genimage (required by some targets to generate disk images)
+RUN wget -O - https://github.com/pengutronix/genimage/releases/download/v14/genimage-14.tar.xz | tar -C /tmp -xJ && \
+ cd /tmp/genimage-14 && \
+ ./configure && \
+ make -j$(nproc) && \
+ make install && \
+ rm -rf /tmp/genimage-14
+
+# Build libtpms
+RUN git clone https://github.com/stefanberger/libtpms /tmp/libtpms && \
+ cd /tmp/libtpms && \
+ ./autogen.sh && \
+ ./configure && \
+ make -j$(nproc) && \
+ make install && \
+ ldconfig && \
+ rm -rf /tmp/libtpms
+
+# Build swtpm
+RUN git clone https://github.com/stefanberger/swtpm /tmp/swtpm && \
+ cd /tmp/swtpm && \
+ ./autogen.sh && \
+ ./configure && \
+ make -j$(nproc) && \
+ make install && \
+ rm -rf /tmp/swtpm
+
+# Build trace-cmd
+RUN mkdir /tmp/trace && \
+ git clone https://git.kernel.org/pub/scm/libs/libtrace/libtraceevent.git /tmp/trace/libtraceevent && \
+ cd /tmp/trace/libtraceevent && \
+ make -j$(nproc) && \
+ sudo make install && \
+ git clone https://git.kernel.org/pub/scm/libs/libtrace/libtracefs.git /tmp/trace/libtracefs && \
+ cd /tmp/trace/libtracefs && \
+ make -j$(nproc) && \
+ sudo make install && \
+ git clone https://github.com/rostedt/trace-cmd.git /tmp/trace/trace-cmd && \
+ cd /tmp/trace/trace-cmd && \
+ make -j$(nproc) && \
+ sudo make install && \
+ rm -rf /tmp/trace
+
+# Files to run Nokia RX-51 (aka N900) tests
+RUN mkdir -p /opt/nokia && \
+ cd /opt/nokia && \
+ wget https://raw.githubusercontent.com/pali/u-boot-maemo/master/debian/u-boot-gen-combined && \
+ chmod 0755 u-boot-gen-combined && \
+ wget http://repository.maemo.org/qemu-n900/qemu-n900.tar.gz && \
+ wget http://repository.maemo.org/pool/maemo5.0/free/k/kernel/kernel_2.6.28-20103103+0m5_armel.deb && \
+ wget http://repository.maemo.org/pool/maemo5.0/free/g/glibc/libc6_2.5.1-1eglibc27+0m5_armel.deb && \
+ wget http://repository.maemo.org/pool/maemo5.0/free/b/busybox/busybox_1.10.2.legal-1osso30+0m5_armel.deb
+
# Create our user/group
RUN echo uboot ALL=NOPASSWD: ALL > /etc/sudoers.d/uboot
RUN useradd -m -U uboot
# Create the buildman config file
RUN /bin/echo -e "[toolchain]\nroot = /usr" > ~/.buildman
-RUN /bin/echo -e "kernelorg = /opt/gcc-11.1.0-nolibc/*" >> ~/.buildman
+RUN /bin/echo -e "kernelorg = /opt/gcc-12.2.0-nolibc/*" >> ~/.buildman
RUN /bin/echo -e "arc = /opt/arc_gnu_2021.03_prebuilt_uclibc_le_archs_linux_install" >> ~/.buildman
RUN /bin/echo -e "\n[toolchain-prefix]\nxtensa = /opt/2020.07/xtensa-dc233c-elf/bin/xtensa-dc233c-elf-" >> ~/.buildman;
-RUN /bin/echo -e "\nnds32 = /opt/nds32le-linux-glibc-v3-upstream/bin/nds32le-linux-" >> ~/.buildman;
RUN /bin/echo -e "\n[toolchain-alias]\nsh = sh2" >> ~/.buildman
-RUN /bin/echo -e "\nriscv = riscv64" >> ~/.buildman
RUN /bin/echo -e "\nsandbox = x86_64" >> ~/.buildman
RUN /bin/echo -e "\nx86 = i386" >> ~/.buildman;
projects / J-u-boot.git / blobdiff