ARM: tegra: Enable position independent build for 64-bit

[J-u-boot.git] / arch / arm / mach-tegra / Kconfig

diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index fd0082d22a33818a76e9c6c9686f0babe7b84bd1..97e22ead59859e79631bf2b12c57f37ff41cff22 100644 (file)
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -12,6 +12,12 @@ config SPL_LIBGENERIC_SUPPORT
 config SPL_SERIAL_SUPPORT
        default y
 
+config TEGRA_CLKRST
+       bool
+
+config TEGRA_GP_PADCTRL
+       bool
+
 config TEGRA_IVC
        bool "Tegra IVC protocol"
        help
@@ -20,8 +26,23 @@ config TEGRA_IVC
          U-Boot, it is typically used for communication between the main CPU
          and various auxiliary processors.
 
+config TEGRA_MC
+       bool
+
+config TEGRA_PINCTRL
+       bool
+
+config TEGRA_PMC
+       bool
+
+config TEGRA_PMC_SECURE
+       bool
+       depends on TEGRA_PMC
+
 config TEGRA_COMMON
        bool "Tegra common options"
+       select BINMAN
+       select BOARD_EARLY_INIT_F
        select CLK
        select DM
        select DM_ETH
@@ -36,9 +57,9 @@ config TEGRA_COMMON
        select DM_SPI_FLASH
        select MISC
        select OF_CONTROL
+       select SPI
        select VIDCONSOLE_AS_LCD if DM_VIDEO
-       select BOARD_EARLY_INIT_F
-       select BINMAN
+       imply CMD_DM
        imply CRC32_VERIFY
 
 config TEGRA_NO_BPMP
@@ -49,18 +70,24 @@ config TEGRA_NO_BPMP
 
 config TEGRA_ARMV7_COMMON
        bool "Tegra 32-bit common options"
-       select CPU_V7
+       select CPU_V7A
        select SPL
        select SPL_BOARD_INIT if SPL
        select SUPPORT_SPL
+       select TEGRA_CLKRST
        select TEGRA_COMMON
        select TEGRA_GPIO
+       select TEGRA_GP_PADCTRL
+       select TEGRA_MC
        select TEGRA_NO_BPMP
+       select TEGRA_PINCTRL
+       select TEGRA_PMC
 
 config TEGRA_ARMV8_COMMON
        bool "Tegra 64-bit common options"
        select ARM64
        select LINUX_KERNEL_IMAGE_HEADER
+       select POSITION_INDEPENDENT
        select TEGRA_COMMON
 
 if TEGRA_ARMV8_COMMON
@@ -97,9 +124,15 @@ config TEGRA124
 
 config TEGRA210
        bool "Tegra210 family"
-       select TEGRA_GPIO
        select TEGRA_ARMV8_COMMON
+       select TEGRA_CLKRST
+       select TEGRA_GPIO
+       select TEGRA_GP_PADCTRL
+       select TEGRA_MC
        select TEGRA_NO_BPMP
+       select TEGRA_PINCTRL
+       select TEGRA_PMC
+       select TEGRA_PMC_SECURE
 
 config TEGRA186
        bool "Tegra186 family"
@@ -116,6 +149,7 @@ endchoice
 
 config TEGRA_DISCONNECT_UDC_ON_BOOT
        bool "Disconnect USB device mode controller on boot"
+       depends on CI_UDC
        default y
        help
          When loading U-Boot into RAM over USB protocols using tools such as