+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2012-2015 Panasonic Corporation
* Copyright (C) 2015-2016 Socionext Inc.
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
/* U-Boot - Common settings for UniPhier Family */
#ifndef __CONFIG_UNIPHIER_COMMON_H__
#define __CONFIG_UNIPHIER_COMMON_H__
-#define CONFIG_ARMV7_PSCI_1_0
+#ifndef CONFIG_SPL_BUILD
+#include <config_distro_bootcmd.h>
+
+#ifdef CONFIG_CMD_MMC
+#define BOOT_TARGET_DEVICE_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1)
+#else
+#define BOOT_TARGET_DEVICE_MMC(func)
+#endif
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
+#ifdef CONFIG_CMD_UBIFS
+#define BOOT_TARGET_DEVICE_UBIFS(func) func(UBIFS, ubifs, 0)
+#else
+#define BOOT_TARGET_DEVICE_UBIFS(func)
+#endif
+
+#ifdef CONFIG_CMD_USB
+#define BOOT_TARGET_DEVICE_USB(func) func(USB, usb, 0)
+#else
+#define BOOT_TARGET_DEVICE_USB(func)
+#endif
+
+#define BOOT_TARGET_DEVICES(func) \
+ BOOT_TARGET_DEVICE_MMC(func) \
+ BOOT_TARGET_DEVICE_UBIFS(func) \
+ BOOT_TARGET_DEVICE_USB(func)
+#else
+#define BOOTENV
+#endif
+
+#define CONFIG_ARMV7_PSCI_1_0
/*-----------------------------------------------------------------------
* MMU and Cache Setting
#define CONFIG_TIMESTAMP
/* FLASH related */
-#define CONFIG_MTD_DEVICE
-
-#define CONFIG_SMC911X_32_BIT
-/* dummy: referenced by examples/standalone/smc911x_eeprom.c */
-#define CONFIG_SMC911X_BASE 0
-
-#ifdef CONFIG_MICRO_SUPPORT_CARD
-#define CONFIG_SMC911X
-#endif
-
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_MAX_FLASH_SECT 256
#define CONFIG_SYS_MONITOR_BASE 0
-#define CONFIG_SYS_MONITOR_LEN 0x00080000 /* 512KB */
+#define CONFIG_SYS_MONITOR_LEN 0x000d0000 /* 832KB */
#define CONFIG_SYS_FLASH_BASE 0
/*
/* serial console configuration */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-
-#define CONFIG_CMDLINE_EDITING /* add command line history */
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command */
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
-#define CONFIG_CONS_INDEX 1
-
#define CONFIG_ENV_OFFSET 0x100000
#define CONFIG_ENV_SIZE 0x2000
/* #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_ONFI_DETECTION
-
-#define CONFIG_NAND_DENALI_ECC_SIZE 1024
-
#define CONFIG_SYS_NAND_REGS_BASE 0x68100000
#define CONFIG_SYS_NAND_DATA_BASE 0x68000000
-
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0
/* SD/MMC */
#define CONFIG_GATEWAYIP 192.168.11.1
#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_LOADADDR 0x84000000
+#define CONFIG_LOADADDR 0x85000000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-
-#define CONFIG_CMDLINE_EDITING /* add command line history */
+#define CONFIG_SYS_BOOTM_LEN (32 << 20)
#if defined(CONFIG_ARM64)
/* ARM Trusted Firmware */
"third_image=u-boot.bin\0"
#endif
-#define CONFIG_BOOTCOMMAND "run $bootmode"
-
#define CONFIG_ROOTPATH "/nfs/root/path"
#define CONFIG_NFSBOOTCOMMAND \
"setenv bootargs $bootargs root=/dev/nfs rw " \
#ifdef CONFIG_FIT
#define CONFIG_BOOTFILE "fitImage"
#define LINUXBOOT_ENV_SETTINGS \
- "fit_addr=0x00100000\0" \
- "fit_addr_r=0x84100000\0" \
- "fit_size=0x00f00000\0" \
- "norboot=setexpr fit_addr $nor_base + $fit_addr &&" \
- "bootm $fit_addr\0" \
- "nandboot=nand read $fit_addr_r $fit_addr $fit_size &&" \
- "bootm $fit_addr_r\0" \
- "tftpboot=tftpboot $fit_addr_r $bootfile &&" \
- "bootm $fit_addr_r\0" \
+ "kernel_addr_r=0x85100000\0" \
+ "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
+ "bootm $kernel_addr_r\0" \
"__nfsboot=run tftpboot\0"
#else
#ifdef CONFIG_ARM64
-#define CONFIG_BOOTFILE "Image.gz"
+#define CONFIG_BOOTFILE "Image"
#define LINUXBOOT_CMD "booti"
-#define KERNEL_ADDR_LOAD "kernel_addr_load=0x84200000\0"
#define KERNEL_ADDR_R "kernel_addr_r=0x82080000\0"
#else
#define CONFIG_BOOTFILE "zImage"
#define LINUXBOOT_CMD "bootz"
-#define KERNEL_ADDR_LOAD "kernel_addr_load=0x80208000\0"
#define KERNEL_ADDR_R "kernel_addr_r=0x80208000\0"
#endif
#define LINUXBOOT_ENV_SETTINGS \
- "fdt_addr=0x00100000\0" \
- "fdt_addr_r=0x84100000\0" \
- "fdt_size=0x00008000\0" \
- "kernel_addr=0x00200000\0" \
- KERNEL_ADDR_LOAD \
+ "fdt_addr_r=0x85100000\0" \
KERNEL_ADDR_R \
- "kernel_size=0x00800000\0" \
- "ramdisk_addr=0x00a00000\0" \
- "ramdisk_addr_r=0x84a00000\0" \
- "ramdisk_size=0x00600000\0" \
- "ramdisk_file=rootfs.cpio.uboot\0" \
+ "ramdisk_addr_r=0x86000000\0" \
+ "ramdisk_file=rootfs.cpio.gz\0" \
"boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 && " \
- "if test $kernel_addr_load = $kernel_addr_r; then " \
- "true; " \
- "else " \
- "unzip $kernel_addr_load $kernel_addr_r; " \
- "fi && " \
LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
- "norboot=setexpr kernel_addr_nor $nor_base + $kernel_addr && " \
- "setexpr kernel_size_div4 $kernel_size / 4 && " \
- "cp $kernel_addr_nor $kernel_addr_load $kernel_size_div4 && " \
- "setexpr ramdisk_addr_nor $nor_base + $ramdisk_addr && " \
- "setexpr ramdisk_size_div4 $ramdisk_size / 4 && " \
- "cp $ramdisk_addr_nor $ramdisk_addr_r $ramdisk_size_div4 && " \
- "setexpr fdt_addr_nor $nor_base + $fdt_addr && " \
- "setexpr fdt_size_div4 $fdt_size / 4 && " \
- "cp $fdt_addr_nor $fdt_addr_r $fdt_size_div4 && " \
- "run boot_common\0" \
- "nandboot=nand read $kernel_addr_load $kernel_addr $kernel_size && " \
- "nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \
- "nand read $fdt_addr_r $fdt_addr $fdt_size &&" \
- "run boot_common\0" \
- "tftpboot=tftpboot $kernel_addr_load $bootfile && " \
+ "tftpboot=tftpboot $kernel_addr_r $bootfile && " \
+ "tftpboot $fdt_addr_r $fdtfile &&" \
"tftpboot $ramdisk_addr_r $ramdisk_file &&" \
- "tftpboot $fdt_addr_r $fdt_file &&" \
+ "setenv ramdisk_addr_r $ramdisk_addr_r:$filesize &&" \
"run boot_common\0" \
"__nfsboot=tftpboot $kernel_addr_load $bootfile && " \
- "tftpboot $fdt_addr_r $fdt_file &&" \
+ "tftpboot $fdt_addr_r $fdtfile &&" \
"setenv ramdisk_addr_r - &&" \
"run boot_common\0"
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
- "verify=n\0" \
"initrd_high=0xffffffffffffffff\0" \
+ "script=boot.scr\0" \
+ "scriptaddr=0x85000000\0" \
"nor_base=0x42000000\0" \
+ "emmcboot=mmcsetn && run bootcmd_mmc${mmc_first_dev}\0" \
+ "nandboot=run bootcmd_ubifs0\0" \
+ "norboot=run tftpboot\0" \
+ "usbboot=run bootcmd_usb0\0" \
+ "emmcscript=setenv devtype mmc && " \
+ "mmcsetn && " \
+ "setenv devnum ${mmc_first_dev} && " \
+ "run loadscript_fat\0" \
+ "nandscript=echo Running ${script} from ubi ... && " \
+ "ubi part UBI && " \
+ "ubifsmount ubi0:boot && " \
+ "ubifsload ${loadaddr} ${script} && " \
+ "source\0" \
+ "norscript=echo Running ${script} from tftp ... && " \
+ "tftpboot ${script} &&" \
+ "source\0" \
+ "usbscript=usb start && " \
+ "setenv devtype usb && " \
+ "setenv devnum 0 && " \
+ "run loadscript_fat\0" \
+ "loadscript_fat=echo Running ${script} from ${devtype}${devnum} ... && " \
+ "load ${devtype} ${devnum}:1 ${loadaddr} ${script} && " \
+ "source\0" \
"sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&" \
"tftpboot $tmp_addr $second_image && " \
"setexpr tmp_addr $nor_base + 0x70000 && " \
"tftpboot $tmp_addr $third_image\0" \
"emmcupdate=mmcsetn &&" \
+ "mmc dev $mmc_first_dev &&" \
"mmc partconf $mmc_first_dev 0 1 1 &&" \
"tftpboot $second_image && " \
"mmc write $loadaddr 0 100 && " \
"tftpboot $third_image && " \
- "mmc write $loadaddr 100 700\0" \
+ "mmc write $loadaddr 100 f00\0" \
"nandupdate=nand erase 0 0x00100000 &&" \
"tftpboot $second_image && " \
"nand write $loadaddr 0 0x00020000 && " \
"tftpboot $third_image && " \
- "nand write $loadaddr 0x00020000 0x000e0000\0" \
+ "nand write $loadaddr 0x00020000 0x001e0000\0" \
"usbupdate=usb start &&" \
"tftpboot $second_image && " \
"usb write $loadaddr 0 100 && " \
"tftpboot $third_image && " \
- "usb write $loadaddr 100 700\0" \
+ "usb write $loadaddr 100 f00\0" \
BOOT_IMAGES \
- LINUXBOOT_ENV_SETTINGS
+ LINUXBOOT_ENV_SETTINGS \
+ BOOTENV
#define CONFIG_SYS_BOOTMAPSZ 0x20000000
#define CONFIG_SYS_SDRAM_BASE 0x80000000
-#define CONFIG_NR_DRAM_BANKS 3
-/* for LD20; the last 64 byte is used for dynamic DDR PHY training */
-#define CONFIG_SYS_MEM_TOP_HIDE 64
-
-#define CONFIG_PANIC_HANG
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE)
/* only for SPL */
#if defined(CONFIG_ARCH_UNIPHIER_LD4) || \
defined(CONFIG_ARCH_UNIPHIER_SLD8)
-#define CONFIG_SPL_TEXT_BASE 0x00040000
-#else
-#define CONFIG_SPL_TEXT_BASE 0x00100000
#endif
-#define CONFIG_SPL_STACK (0x00100000)
-
-#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_STACK (0x00200000)
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000
/* subtract sizeof(struct image_header) */
-#define CONFIG_SYS_UBOOT_BASE (0x70000 - 0x40)
+#define CONFIG_SYS_UBOOT_BASE (0x130000 - 0x40)
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
#define CONFIG_SPL_MAX_FOOTPRINT 0x10000