configs: stm32mp1: Restore boot SPL from sdcard for Engicam i.Core STM32MP1 C.TOUCH 2.0

[J-u-boot.git] / configs / brppt2_defconfig

diff --git a/configs/brppt2_defconfig b/configs/brppt2_defconfig
index 2f29cb3dc46260fe292d40a066ebb68f4cae96ef..f02aef240486dd6413c8137d4f645f9f364e7a69 100644 (file)
--- a/configs/brppt2_defconfig
+++ b/configs/brppt2_defconfig
@@ -2,7 +2,6 @@ CONFIG_ARM=y
 # CONFIG_SPL_SYS_THUMB_BUILD is not set
 CONFIG_SYS_L2CACHE_OFF=y
 CONFIG_ARCH_MX6=y
-CONFIG_TEXT_BASE=0x17800000
 CONFIG_SYS_MALLOC_LEN=0xa00000
 CONFIG_SYS_MALLOC_F_LEN=0x1000
 CONFIG_SPL_GPIO=y
@@ -18,13 +17,14 @@ CONFIG_TARGET_BRPPT2=y
 CONFIG_DEFAULT_DEVICE_TREE="imx6dl-brppt2"
 CONFIG_SPL_SERIAL=y
 CONFIG_SYS_BOOTCOUNT_ADDR=0x020CC068
+CONFIG_SYS_LOAD_ADDR=0x10700000
 CONFIG_SPL=y
 CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
 # CONFIG_CMD_BMODE is not set
-CONFIG_SYS_LOAD_ADDR=0x10700000
 # CONFIG_EXPERT is not set
+# CONFIG_EFI_LOADER is not set
 CONFIG_SPI_BOOT=y
 CONFIG_BOOTDELAY=0
 CONFIG_OF_BOARD_SETUP=y
@@ -34,7 +34,6 @@ CONFIG_SYS_PBSIZE=532
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC=y
-# CONFIG_SPL_SYS_MMCSD_RAW_MODE is not set
 CONFIG_SPL_I2C=y
 CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_SPI_LOAD=y
@@ -52,9 +51,9 @@ CONFIG_CMD_I2C=y
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
 CONFIG_BOOTP_MAY_FAIL=y
 CONFIG_SYS_DISABLE_AUTOLOAD=y
+CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIME=y
@@ -70,8 +69,8 @@ CONFIG_VERSION_VARIABLE=y
 CONFIG_ARP_TIMEOUT=1500
 CONFIG_NET_RETRY_COUNT=10
 CONFIG_BOOTP_SEND_HOSTNAME=y
-CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_NETCONSOLE=y
+CONFIG_NET_RANDOM_ETHADDR=y
 # CONFIG_DM_DEVICE_REMOVE is not set
 CONFIG_SPL_DM_SEQ_ALIAS=y
 # CONFIG_OF_TRANSLATE is not set
@@ -102,4 +101,3 @@ CONFIG_MXC_SPI=y
 CONFIG_USB=y
 CONFIG_USB_STORAGE=y
 CONFIG_SPL_TINY_MEMSET=y
-# CONFIG_EFI_LOADER is not set