configs: verdin-imx8mp: enable ARCH_MISC_INIT

[J-u-boot.git] / configs / sama5d3_xplained_mmc_defconfig

diff --git a/configs/sama5d3_xplained_mmc_defconfig b/configs/sama5d3_xplained_mmc_defconfig
index 2833717386d430b211c82bff72d331be5d95f335..9b4affe1c49e0bdc1096567e3401a88df6f72274 100644 (file)
--- a/configs/sama5d3_xplained_mmc_defconfig
+++ b/configs/sama5d3_xplained_mmc_defconfig
@@ -2,36 +2,51 @@ CONFIG_ARM=y
 CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_ARCH_CPU_INIT=y
 CONFIG_ARCH_AT91=y
-CONFIG_SYS_TEXT_BASE=0x26f00000
+CONFIG_TEXT_BASE=0x26f00000
 CONFIG_TARGET_SAMA5D3_XPLAINED=y
 CONFIG_SPL_GPIO=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_NR_DRAM_BANKS=1
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20003ef0
 CONFIG_ENV_SIZE=0x4000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d3_xplained"
 CONFIG_SPL_TEXT_BASE=0x300000
+CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_SYS_MONITOR_LEN=1048576
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
+CONFIG_SPL_STACK=0x318000
 CONFIG_SPL=y
-CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_DEBUG_UART_BASE=0xffffee00
 CONFIG_DEBUG_UART_CLOCK=132000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_DEBUG_UART=y
 CONFIG_ENV_VARS_UBOOT_CONFIG=y
-CONFIG_SYS_LOAD_ADDR=0x22000000
 CONFIG_FIT=y
 CONFIG_SD_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="if test ! -n ${dtb_name}; then setenv dtb_name at91-${board_name}.dtb; fi; fatload mmc 0:1 0x21000000 ${dtb_name}; fatload mmc 0:1 0x22000000 zImage; bootz 0x22000000 - 0x21000000"
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_SPL_MAX_SIZE=0x18000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x20000000
+CONFIG_SPL_BSS_MAX_SIZE=0x80000
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SYS_SPL_MALLOC=y
+CONFIG_SYS_SPL_MALLOC_SIZE=0x80000
 CONFIG_HUSH_PARSER=y
+CONFIG_SYS_CBSIZE=256
+CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_BOOTZ=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_LOADS is not set
@@ -40,6 +55,7 @@ CONFIG_CMD_NAND=y
 CONFIG_CMD_NAND_TRIMFFS=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
+CONFIG_BOOTP_BOOTFILESIZE=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_HASH=y
@@ -55,7 +71,6 @@ CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names"
 CONFIG_ENV_IS_IN_FAT=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_DM=y
 CONFIG_SPL_DM=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_CLK=y
@@ -70,7 +85,9 @@ CONFIG_MTD_RAW_NAND=y
 CONFIG_NAND_ATMEL=y
 CONFIG_ATMEL_NAND_HW_PMECC=y
 CONFIG_PMECC_CAP=4
-CONFIG_DM_ETH=y
+CONFIG_SYS_NAND_ONFI_DETECTION=y
+CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
+CONFIG_SYS_NAND_U_BOOT_OFFS=0x40000
 CONFIG_MACB=y
 CONFIG_PINCTRL=y
 CONFIG_SPL_PINCTRL=y
@@ -78,14 +95,19 @@ CONFIG_PINCTRL_AT91=y
 CONFIG_DM_SERIAL=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_ATMEL_USART=y
+CONFIG_SYSRESET=y
+CONFIG_SPL_SYSRESET=y
+CONFIG_SYSRESET_AT91=y
 CONFIG_TIMER=y
 CONFIG_SPL_TIMER=y
 CONFIG_ATMEL_PIT_TIMER=y
+CONFIG_SPL_ATMEL_PIT_TIMER=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_ATMEL=y
+CONFIG_USB_ATMEL_CLK_SEL_UPLL=y
 CONFIG_USB_STORAGE=y
 CONFIG_W1=y
 CONFIG_W1_GPIO=y
 CONFIG_W1_EEPROM=y
 CONFIG_W1_EEPROM_DS24XXX=y
-CONFIG_OF_LIBFDT_OVERLAY=y