sphinx: Pin to docutils-0.16

[J-u-boot.git] / configs / brppt1_nand_defconfig

diff --git a/configs/brppt1_nand_defconfig b/configs/brppt1_nand_defconfig
index 51edc919676d03c94e0e9d8f98d6a8fde1d70078..f4827e427f67f0736590f7557f33ce4e5b57e819 100644 (file)
--- a/configs/brppt1_nand_defconfig
+++ b/configs/brppt1_nand_defconfig
@@ -4,13 +4,15 @@ CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_ENV_SIZE=0x10000
+CONFIG_ENV_OFFSET=0x60000
+CONFIG_DM_GPIO=y
 CONFIG_AM33XX=y
 CONFIG_TARGET_BRPPT1=y
 CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_ENV_SIZE=0x10000
-CONFIG_ENV_OFFSET=0x60000
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SPL=y
+CONFIG_DEFAULT_DEVICE_TREE="am335x-brppt1-nand"
 # CONFIG_EXPERT is not set
 # CONFIG_FIT is not set
 CONFIG_OF_BOARD_SETUP=y
@@ -22,7 +24,6 @@ CONFIG_PREBOOT="run cfgscr; run brdefaultip"
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
-CONFIG_VERSION_VARIABLE=y
 # CONFIG_DISPLAY_CPUINFO is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_ARCH_MISC_INIT=y
@@ -30,6 +31,9 @@ CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SEPARATE_BSS=y
 # CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_NAND_DRIVERS=y
+CONFIG_SPL_NAND_ECC=y
+CONFIG_SPL_NAND_BASE=y
 CONFIG_SPL_POWER_SUPPORT=y
 CONFIG_SPL_WATCHDOG_SUPPORT=y
 CONFIG_SPL_YMODEM_SUPPORT=y
@@ -64,22 +68,25 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:128k(MLO),128k(cfgscr),128k(dtb),
 # CONFIG_SPL_DOS_PARTITION is not set
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="am335x-brppt1-nand"
 CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clocks clock-names interrupt-parent interrupt-controller interrupt-cells dma-names dmas "
+CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_VERSION_VARIABLE=y
+CONFIG_BOOTP_SEND_HOSTNAME=y
 CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_SPL_DM=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
 # CONFIG_OF_TRANSLATE is not set
 CONFIG_BLK=y
 CONFIG_BOOTCOUNT_LIMIT=y
-CONFIG_DM_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
 CONFIG_MISC=y
 # CONFIG_MMC is not set
+CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
 CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000