ls1028a: use default scan_dev_for_boot

[J-u-boot.git] / configs / mk802_a10s_defconfig

diff --git a/configs/mk802_a10s_defconfig b/configs/mk802_a10s_defconfig
index 316b7e8765a8f1a1c787e0ccb5a7f8607b66f019..fd4299bfc22d7d1d59957f248cc05ea538ba15c7 100644 (file)
--- a/configs/mk802_a10s_defconfig
+++ b/configs/mk802_a10s_defconfig
@@ -1,16 +1,14 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
+CONFIG_SPL=y
 CONFIG_MACH_SUN5I=y
 CONFIG_DRAM_CLK=432
 CONFIG_DRAM_EMR1=0
 CONFIG_USB1_VBUS_PIN="PB10"
 CONFIG_DEFAULT_DEVICE_TREE="sun5i-a10s-mk802"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_SPL=y
-CONFIG_OF_BOARD_SETUP=y
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_FPGA is not set
-CONFIG_CMD_GPIO=y
+CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_AXP152_POWER=y
+CONFIG_CONS_INDEX=2
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y