configs: Migrate CONFIG_SYS_TEXT_BASE

[J-u-boot.git] / include / configs / ap_sh4a_4a.h

diff --git a/include/configs/ap_sh4a_4a.h b/include/configs/ap_sh4a_4a.h
index e922cdfdbfc9a9c9facd05344dc89b92853633bb..7eba319bfac6820413d700c795a0b81388b0da1c 100644 (file)
--- a/include/configs/ap_sh4a_4a.h
+++ b/include/configs/ap_sh4a_4a.h
@@ -9,69 +9,33 @@
 #ifndef __AP_SH4A_4A_H
 #define __AP_SH4A_4A_H
 
-#undef DEBUG
 #define CONFIG_CPU_SH7734      1
-#define CONFIG_AP_SH4A_4A      1
 #define CONFIG_400MHZ_MODE     1
-/* #define CONFIG_533MHZ_MODE  1 */
-
-#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_SYS_TEXT_BASE 0x8BFC0000
-
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_ENV
-
-#define CONFIG_BAUDRATE                115200
-#define CONFIG_BOOTARGS                "console=ttySC4,115200"
 
+#define CONFIG_DISPLAY_BOARDINFO
 #undef  CONFIG_SHOW_BOOT_PROGRESS
 
 /* Ether */
-#define CONFIG_SH_ETHER 1
 #define CONFIG_SH_ETHER_USE_PORT (0)
 #define CONFIG_SH_ETHER_PHY_ADDR (0x0)
 #define CONFIG_SH_ETHER_PHY_MODE (PHY_INTERFACE_MODE_GMII)
 #define CONFIG_SH_ETHER_SH7734_MII (0x02) /* GMII */
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_MICREL 1
 #define CONFIG_BITBANGMII
 #define CONFIG_BITBANGMII_MULTI
 
-/* I2C */
-#define CONFIG_SH_SH7734_I2C   1
-#define CONFIG_HARD_I2C                        1
-#define CONFIG_I2C_MULTI_BUS   1
-#define CONFIG_SYS_MAX_I2C_BUS 2
-#define CONFIG_SYS_I2C_MODULE  0
-#define CONFIG_SYS_I2C_SPEED   400000 /* 400 kHz */
-#define CONFIG_SYS_I2C_SLAVE   0x50
-#define CONFIG_SH_I2C_DATA_HIGH        4
-#define CONFIG_SH_I2C_DATA_LOW 5
-#define CONFIG_SH_I2C_CLOCK            500000000
-#define CONFIG_SH_I2C_BASE0            0xFFC70000
-#define CONFIG_SH_I2C_BASE1            0xFFC71000
-
 /* undef to save memory        */
 #define CONFIG_SYS_LONGHELP
 /* Monitor Command Prompt */
-/* Buffer size for input from the Console */
-#define CONFIG_SYS_CBSIZE              256
 /* Buffer size for Console output */
 #define CONFIG_SYS_PBSIZE              256
-/* max args accepted for monitor commands */
-#define CONFIG_SYS_MAXARGS             16
-/* Buffer size for Boot Arguments passed to kernel */
-#define CONFIG_SYS_BARGSIZE    512
 /* List of legal baudrate settings for this board */
 #define CONFIG_SYS_BAUDRATE_TABLE      { 115200 }
 
 /* SCIF */
-#define CONFIG_SCIF_CONSOLE    1
 #define CONFIG_SCIF                    1
 #define CONFIG_CONS_SCIF4      1
 
 /* Suppress display of console information at boot */
-#undef  CONFIG_SYS_CONSOLE_INFO_QUIET
 
 /* SDRAM */
 #define CONFIG_SYS_SDRAM_BASE  (0x88000000)
@@ -125,7 +89,6 @@
 #define CONFIG_SYS_BOOTMAPSZ   (8 * 1024 * 1024)
 
 /* ENV setting */
-#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_OVERWRITE   1
 #define CONFIG_ENV_SECT_SIZE   (128 * 1024)
 #define CONFIG_ENV_SIZE                (CONFIG_ENV_SECT_SIZE)