configs: stm32mp1: Restore boot SPL from sdcard for Engicam i.Core STM32MP1 C.TOUCH 2.0

[J-u-boot.git] / configs / imx8mp_beacon_defconfig

diff --git a/configs/imx8mp_beacon_defconfig b/configs/imx8mp_beacon_defconfig
index fe1678d8ae93314e977de4afeea7a7796656ba90..f39e4f5dd282fef772297a5684c28bd525f8ec2b 100644 (file)
--- a/configs/imx8mp_beacon_defconfig
+++ b/configs/imx8mp_beacon_defconfig
@@ -13,7 +13,6 @@ CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0xFFFFDE00
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="freescale/imx8mp-beacon-kit"
-CONFIG_SPL_TEXT_BASE=0x920000
 CONFIG_TARGET_IMX8MP_BEACON=y
 CONFIG_DM_RESET=y
 CONFIG_SYS_MONITOR_LEN=524288
@@ -21,19 +20,23 @@ CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_SPL_STACK=0x960000
+CONFIG_SPL_TEXT_BASE=0x920000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x98fc00
+CONFIG_SPL_BSS_MAX_SIZE=0x400
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_SPL=y
 CONFIG_ARMV8_SPL_EXCEPTION_VECTORS=y
 CONFIG_ARMV8_SET_SMPEN=y
 # CONFIG_PSCI_RESET is not set
 CONFIG_ARMV8_EA_EL3_FIRST=y
 CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
-CONFIG_SYS_LOAD_ADDR=0x40480000
 CONFIG_PCI=y
 # CONFIG_ANDROID_BOOT_IMAGE is not set
 CONFIG_FIT=y
 CONFIG_FIT_EXTERNAL_OFFSET=0x3000
 CONFIG_SPL_LOAD_FIT=y
-CONFIG_SYS_BOOTM_LEN=0x2000000
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_OF_SYSTEM_SETUP=y
 CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else booti ${loadaddr} - ${fdt_addr}; fi"
@@ -42,9 +45,6 @@ CONFIG_SYS_CBSIZE=2048
 CONFIG_SYS_PBSIZE=2074
 # CONFIG_SYS_DEVICE_NULLDEV is not set
 CONFIG_SPL_MAX_SIZE=0x26000
-CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
-CONFIG_SPL_BSS_START_ADDR=0x98fc00
-CONFIG_SPL_BSS_MAX_SIZE=0x400
 CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_BOOTROM_SUPPORT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
@@ -53,7 +53,7 @@ CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
 CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x42200000
 CONFIG_SPL_SYS_MALLOC_SIZE=0x80000
-CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SPL_SYS_MMCSD_RAW_MODE=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
 CONFIG_SPL_I2C=y
 CONFIG_SPL_POWER=y
@@ -113,6 +113,7 @@ CONFIG_SPI_FLASH_BAR=y
 CONFIG_SPI_FLASH_ATMEL=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_MTD=y
+CONFIG_PHY_ANEG_TIMEOUT=20000
 CONFIG_PHY_MICREL=y
 CONFIG_PHY_MICREL_KSZ90X1=y
 CONFIG_DM_ETH_PHY=y
@@ -135,7 +136,6 @@ CONFIG_IMX8MP_HSIOMIX_BLKCTRL=y
 CONFIG_DM_PMIC=y
 CONFIG_DM_PMIC_PCA9450=y
 CONFIG_SPL_DM_PMIC_PCA9450=y
-CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_PCA9450=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y