Convert CONFIG_SYS_NAND_SPL_KERNEL_OFFS to Kconfig

[J-u-boot.git] / include / configs / sama5d3_xplained.h

diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h
index 5cbddf30d7cce272387760ab76b06c427cd8a61d..3bb53a0dd1b5d7bb07e1d6975cd7ce49521349b8 100644 (file)
--- a/include/configs/sama5d3_xplained.h
+++ b/include/configs/sama5d3_xplained.h
@@ -9,6 +9,7 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#include <linux/sizes.h>
 #include "at91-sama5_common.h"
 
 /*
@@ -23,39 +24,20 @@
 #define ATMEL_PMC_UHP                  (1 <<  6)
 
 /* SDRAM */
-#define CONFIG_NR_DRAM_BANKS           1
 #define CONFIG_SYS_SDRAM_BASE           0x20000000
 #define CONFIG_SYS_SDRAM_SIZE          0x10000000
 
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SYS_INIT_SP_ADDR                0x318000
-#else
-#define CONFIG_SYS_INIT_SP_ADDR \
-       (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
-#endif
-
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           0x60000000
 /* our ALE is AD21 */
 #define CONFIG_SYS_NAND_MASK_ALE       (1 << 21)
 /* our CLE is AD22 */
 #define CONFIG_SYS_NAND_MASK_CLE       (1 << 22)
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
 #endif
-/* PMECC & PMERRLOC */
-#define CONFIG_ATMEL_NAND_HWECC
-#define CONFIG_ATMEL_NAND_HW_PMECC
-#define CONFIG_PMECC_CAP               4
-#define CONFIG_PMECC_SECTOR_SIZE       512
 
 /* USB */
-
 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_ATMEL
 #define CONFIG_USB_ATMEL_CLK_SEL_UPLL
@@ -66,33 +48,14 @@
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS     2
 #endif
 
-#define CONFIG_SYS_LOAD_ADDR                   0x22000000 /* load address */
-
 /* SPL */
-#define CONFIG_SPL_TEXT_BASE           0x300000
-#define CONFIG_SPL_MAX_SIZE            0x18000
-#define CONFIG_SPL_BSS_START_ADDR      0x20000000
-#define CONFIG_SPL_BSS_MAX_SIZE                0x80000
-#define CONFIG_SYS_SPL_MALLOC_START    0x20080000
-#define CONFIG_SYS_SPL_MALLOC_SIZE     0x80000
-
-#define CONFIG_SYS_MONITOR_LEN         (512 << 10)
 
-#ifdef CONFIG_SD_BOOT
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "u-boot.img"
+/* size of u-boot.bin to load */
+#define CONFIG_SYS_MONITOR_LEN         (2 * SZ_512K)
 
-#elif CONFIG_NAND_BOOT
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_BASE
-#endif
-#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x40000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_SIZE      0x800
-#define CONFIG_SYS_NAND_PAGE_COUNT     64
-#define CONFIG_SYS_NAND_OOBSIZE                64
-#define CONFIG_SYS_NAND_BLOCK_SIZE     0x20000
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS  0x0
-#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
+/* Falcon boot support on raw MMC */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR  0x100  /* 128 KiB */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
+/* U-Boot proper stored by default at 0x200 (256 KiB) */
 
 #endif