Convert CONFIG_ARP_TIMEOUT to Kconfig

[J-u-boot.git] / include / configs / mvebu_armada-8k.h

diff --git a/include/configs/mvebu_armada-8k.h b/include/configs/mvebu_armada-8k.h
index 9205bd9632c3301d87c67f7eb0a844d61383d0b9..049f00f7f02616a0a03530a9c395c0e6f42a5460 100644 (file)
--- a/include/configs/mvebu_armada-8k.h
+++ b/include/configs/mvebu_armada-8k.h
@@ -14,68 +14,28 @@
 /* additions for new ARM relocation support */
 #define CONFIG_SYS_SDRAM_BASE  0x00000000
 
-#define CONFIG_NR_DRAM_BANKS   1
-
 /* auto boot */
-#define CONFIG_PREBOOT
 
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, \
                                          115200, 230400, 460800, 921600 }
 
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_CMDLINE_TAG             /* enable passing of ATAGs  */
-#define CONFIG_INITRD_TAG              /* enable INITRD tag */
-#define CONFIG_SETUP_MEMORY_TAGS       /* enable memory tag */
-
 #define        CONFIG_SYS_CBSIZE       1024    /* Console I/O Buff Size */
 
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN  (4 << 20) /* 4MiB for malloc() */
-
 /*
  * Other required minimal configurations
  */
-#define CONFIG_ARCH_CPU_INIT           /* call arch_cpu_init() */
-#define CONFIG_SYS_LOAD_ADDR   0x00800000      /* default load adr- 8M */
-#define CONFIG_SYS_MEMTEST_START 0x00800000    /* 8M */
-#define CONFIG_SYS_MEMTEST_END 0x00ffffff      /*(_16M -1) */
-#define CONFIG_SYS_RESET_ADDRESS 0xffff0000    /* Rst Vector Adr */
 #define CONFIG_SYS_MAXARGS     32      /* max number of command args */
 
 /* End of 16M scrubbed by training in bootrom */
 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE + 0xFF0000)
 
-/*
- * SPI Flash configuration
- */
-#define CONFIG_ENV_SPI_BUS             0
-#define CONFIG_ENV_SPI_CS              0
-
-/* SPI NOR flash default params, used by sf commands */
-#define CONFIG_SF_DEFAULT_SPEED                1000000
-#define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
-#define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
-
-#define CONFIG_ENV_OFFSET              0x180000 /* as Marvell U-Boot version */
-#define CONFIG_ENV_SIZE                        (64 << 10) /* 64KiB */
-#define CONFIG_ENV_SECT_SIZE           (64 << 10) /* 64KiB sectors */
+/* When runtime detection fails this is the default */
 
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
-#define CONFIG_SYS_NAND_MAX_CHIPS      1
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
 
 /*
  * Ethernet Driver configuration
  */
-#define CONFIG_ENV_OVERWRITE   /* ethaddr can be reprogrammed */
-#define CONFIG_ARP_TIMEOUT     200
 #define CONFIG_NET_RETRY_COUNT 50
 
 #define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)
@@ -85,21 +45,12 @@
 /*
  * SATA/SCSI/AHCI configuration
  */
-#define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_LBA48
 #define CONFIG_SYS_64BIT_LBA
 
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID    2
-#define CONFIG_SYS_SCSI_MAX_LUN                1
-#define CONFIG_SYS_SCSI_MAX_DEVICE     (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-                                        CONFIG_SYS_SCSI_MAX_LUN)
-
 /*
  * PCI configuration
  */
-#ifdef CONFIG_PCIE_DW_MVEBU
-#define CONFIG_E1000
-#endif
 
 #define BOOT_TARGET_DEVICES(func) \
        func(MMC, mmc, 1) \
@@ -112,11 +63,11 @@
 #include <config_distro_bootcmd.h>
 
 #define CONFIG_EXTRA_ENV_SETTINGS      \
-       "scriptaddr=0x4d00000\0"        \
-       "pxefile_addr_r=0x4e00000\0"    \
-       "fdt_addr_r=0x4f00000\0"        \
-       "kernel_addr_r=0x5000000\0"     \
-       "ramdisk_addr_r=0x8000000\0"    \
+       "scriptaddr=0x6d00000\0"        \
+       "pxefile_addr_r=0x6e00000\0"    \
+       "fdt_addr_r=0x6f00000\0"        \
+       "kernel_addr_r=0x7000000\0"     \
+       "ramdisk_addr_r=0xa000000\0"    \
        "fdtfile=marvell/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
        BOOTENV