mpc83xx: Kconfig: Migrate HRCW to Kconfig

[J-u-boot.git] / include / configs / TQM834x.h

diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h
index bde8c3b882c6a7b3c7d4b6345427ecab7cdb66a5..be1c2893f16538438a32f070495841bbe8d62a17 100644 (file)
--- a/include/configs/TQM834x.h
+++ b/include/configs/TQM834x.h
@@ -15,15 +15,10 @@
  * High Level Configuration Options
  */
 #define CONFIG_E300            1       /* E300 Family */
-#define CONFIG_MPC834x         1       /* MPC834x specific */
-#define CONFIG_MPC8349         1       /* MPC8349 specific */
 
 /* IMMR Base Address Register, use Freescale default: 0xff400000 */
 #define CONFIG_SYS_IMMR                0xff400000
 
-/* System clock. Primary input clock when in PCI host mode */
-#define CONFIG_83XX_CLKIN      66666000        /* 66,666 MHz */
-
 /*
  * Local Bus LCRR
  *    LCRR:  DLL bypass, Clock divider is 8
@@ -58,13 +53,10 @@
 /*
  * FLASH on the Local Bus
  */
-#define CONFIG_SYS_FLASH_CFI           /* use the Common Flash Interface */
-#define CONFIG_FLASH_CFI_DRIVER                /* use the CFI driver */
 #undef CONFIG_SYS_FLASH_CHECKSUM
 #define CONFIG_SYS_FLASH_BASE          0x80000000      /* start of FLASH   */
 #define CONFIG_SYS_FLASH_SIZE          8               /* FLASH size in MB */
 #define CONFIG_SYS_FLASH_EMPTY_INFO    /* print 'E' for empty sectors */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 
 /*
  * FLASH bank number detection
@@ -181,7 +173,6 @@
 /*
  * TSEC
  */
-#define CONFIG_MII
 
 #define CONFIG_SYS_TSEC1_OFFSET        0x24000
 #define CONFIG_SYS_TSEC1       (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
@@ -269,41 +260,6 @@
                                /* Initial Memory map for Linux */
 #define CONFIG_SYS_BOOTMAPSZ   (256 << 20)
 
-#define CONFIG_SYS_HRCW_LOW (\
-       HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
-       HRCWL_DDR_TO_SCB_CLK_1X1 |\
-       HRCWL_CSB_TO_CLKIN_4X1 |\
-       HRCWL_VCO_1X2 |\
-       HRCWL_CORE_TO_CSB_2X1)
-
-#if defined(PCI_64BIT)
-#define CONFIG_SYS_HRCW_HIGH (\
-       HRCWH_PCI_HOST |\
-       HRCWH_64_BIT_PCI |\
-       HRCWH_PCI1_ARBITER_ENABLE |\
-       HRCWH_PCI2_ARBITER_DISABLE |\
-       HRCWH_CORE_ENABLE |\
-       HRCWH_FROM_0X00000100 |\
-       HRCWH_BOOTSEQ_DISABLE |\
-       HRCWH_SW_WATCHDOG_DISABLE |\
-       HRCWH_ROM_LOC_LOCAL_16BIT |\
-       HRCWH_TSEC1M_IN_GMII |\
-       HRCWH_TSEC2M_IN_GMII)
-#else
-#define CONFIG_SYS_HRCW_HIGH (\
-       HRCWH_PCI_HOST |\
-       HRCWH_32_BIT_PCI |\
-       HRCWH_PCI1_ARBITER_ENABLE |\
-       HRCWH_PCI2_ARBITER_DISABLE |\
-       HRCWH_CORE_ENABLE |\
-       HRCWH_FROM_0X00000100 |\
-       HRCWH_BOOTSEQ_DISABLE |\
-       HRCWH_SW_WATCHDOG_DISABLE |\
-       HRCWH_ROM_LOC_LOCAL_16BIT |\
-       HRCWH_TSEC1M_IN_GMII |\
-       HRCWH_TSEC2M_IN_GMII)
-#endif
-
 /* System IO Config */
 #define CONFIG_SYS_SICRH       0
 #define CONFIG_SYS_SICRL       SICRL_LDP_A
@@ -475,8 +431,6 @@
  * JFFS2 partitions
  */
 /* mtdparts command line support */
-#define CONFIG_MTD_DEVICE              /* needed for mtdparts commands */
-#define CONFIG_FLASH_CFI_MTD
 
 /* default mtd partition table */
 #endif /* __CONFIG_H */