configs: stm32mp1: Restore boot SPL from sdcard for Engicam i.Core STM32MP1 C.TOUCH 2.0

[J-u-boot.git] / configs / am335x_shc_ict_defconfig

diff --git a/configs/am335x_shc_ict_defconfig b/configs/am335x_shc_ict_defconfig
index ab06034ba55c62779445d6a775fd016393c2d600..61527e2724ae440cbedb2d392d7e0fcbea778080 100644 (file)
--- a/configs/am335x_shc_ict_defconfig
+++ b/configs/am335x_shc_ict_defconfig
@@ -4,8 +4,6 @@ CONFIG_ARCH_OMAP2PLUS=y
 CONFIG_SPL_GPIO=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030ff00
 CONFIG_ENV_SIZE=0x1000
 CONFIG_ENV_OFFSET=0x7000
 CONFIG_DEFAULT_DEVICE_TREE="am335x-shc"
@@ -13,6 +11,7 @@ CONFIG_AM33XX=y
 CONFIG_TARGET_AM335X_SHC=y
 CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
+CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x9000
 CONFIG_SPL_FS_FAT=y
@@ -28,7 +27,9 @@ CONFIG_AUTOBOOT_DELAY_STR="shc"
 CONFIG_AUTOBOOT_STOP_STR="noautoboot"
 CONFIG_BOOTCOMMAND="if mmc dev 0; mmc rescan; then run sd_setup; else echo ERROR: SD/MMC-Card not detected!; panic; fi; run fusecmd; "
 CONFIG_DEFAULT_FDT_FILE="am335x-shc"
+CONFIG_SYS_PBSIZE=1049
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
+CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC_SIMPLE=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
@@ -45,9 +46,6 @@ CONFIG_SPL_WATCHDOG=y
 CONFIG_SPL_YMODEM_SUPPORT=y
 # CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC is not set
 CONFIG_SYS_PROMPT="U-Boot# "
-CONFIG_SYS_MAXARGS=64
-CONFIG_SYS_PBSIZE=1049
-CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_MMC=y
@@ -65,10 +63,12 @@ CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
 CONFIG_VERSION_VARIABLE=y
 CONFIG_NET_RETRY_COUNT=10
 CONFIG_BOOTP_SEND_HOSTNAME=y
-CONFIG_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_SYS_I2C_SLAVE=0x1
 CONFIG_SYS_I2C_SPEED=400000
+CONFIG_MISC=y
+CONFIG_I2C_EEPROM=y
 CONFIG_MMC_OMAP_HS=y
 CONFIG_HSMMC2_8BIT=y
 CONFIG_PHY_ADDR_ENABLE=y