Kconfig: Migrate CONFIG_BAUDRATE

[J-u-boot.git] / include / configs / M5282EVB.h

diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h
index 6e0aa14d3a0945bc24757fc7f589f81bc0c75099..061a632c9863d1d075618f56cba6a9ec6214045d 100644 (file)
--- a/include/configs/M5282EVB.h
+++ b/include/configs/M5282EVB.h
@@ -3,23 +3,7 @@
  *
  * (C) Copyright 2003 Josef Baumgartner <[email protected]>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -33,15 +17,10 @@
  * High Level Configuration Options
  * (easy to change)
  */
-#define        CONFIG_MCF52x2          /* define processor family */
-#define CONFIG_M5282           /* define processor type */
-
 #define CONFIG_MCFTMR
 
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT           (0)
-#define CONFIG_BAUDRATE                115200
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600 , 19200 , 38400 , 57600, 115200 }
 
 #undef CONFIG_MONITOR_IS_IN_RAM        /* define if monitor is started from a pre-loader */
 
@@ -52,6 +31,10 @@
 #define CONFIG_ENV_SIZE                0x2000
 #define CONFIG_ENV_IS_IN_FLASH 1
 
+#define LDS_BOARD_TEXT \
+       . = DEFINED(env_offset) ? env_offset : .; \
+       common/env_embedded.o (.text*);
+
 /*
  * BOOTP options
  */
@@ -63,18 +46,9 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_MII
-
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_LOADB
 
 #define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
-#      define CONFIG_NET_MULTI         1
 #      define CONFIG_MII               1
 #      define CONFIG_MII_INIT          1
 #      define CONFIG_SYS_DISCOVER_PHY
@@ -95,14 +69,11 @@
 #      endif                   /* CONFIG_SYS_DISCOVER_PHY */
 #endif
 
-#define CONFIG_BOOTDELAY       5
 #ifdef CONFIG_MCFFEC
-#      define CONFIG_ETHADDR   00:e0:0c:bc:e5:60
 #      define CONFIG_IPADDR    192.162.1.2
 #      define CONFIG_NETMASK   255.255.255.0
 #      define CONFIG_SERVERIP  192.162.1.1
 #      define CONFIG_GATEWAYIP 192.162.1.1
-#      define CONFIG_OVERWRITE_ETHADDR_ONCE
 #endif                         /* CONFIG_MCFFEC */
 
 #define CONFIG_HOSTNAME                M5282EVB
@@ -118,7 +89,6 @@
        "save\0"                                \
        ""
 
-#define CONFIG_SYS_PROMPT              "-> "
 #define        CONFIG_SYS_LONGHELP             /* undef to save memory         */
 
 #if defined(CONFIG_CMD_KGDB)
@@ -135,7 +105,6 @@
 #define CONFIG_SYS_MEMTEST_START       0x400
 #define CONFIG_SYS_MEMTEST_END         0x380000
 
-#define CONFIG_SYS_HZ                  1000
 #define        CONFIG_SYS_CLK                  64000000
 
 /* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */
@@ -154,9 +123,8 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       0x20000000
-#define CONFIG_SYS_INIT_RAM_END        0x10000 /* End of used area in internal SRAM    */
-#define CONFIG_SYS_GBL_DATA_SIZE       64      /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE       0x10000 /* Size of used area in internal SRAM    */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -172,10 +140,10 @@
 
 /* If M5282 port is fully implemented the monitor base will be behind
  * the vector table. */
-#if (TEXT_BASE != CONFIG_SYS_INT_FLASH_BASE)
+#if (CONFIG_SYS_TEXT_BASE != CONFIG_SYS_INT_FLASH_BASE)
 #define CONFIG_SYS_MONITOR_BASE        (CONFIG_SYS_FLASH_BASE + 0x400)
 #else
-#define CONFIG_SYS_MONITOR_BASE        (TEXT_BASE + 0x418)     /* 24 Byte for CFM-Config */
+#define CONFIG_SYS_MONITOR_BASE        (CONFIG_SYS_TEXT_BASE + 0x418)  /* 24 Byte for CFM-Config */
 #endif
 
 #define CONFIG_SYS_MONITOR_LEN         0x20000
@@ -211,9 +179,9 @@
 #define CONFIG_SYS_CACHELINE_SIZE      16
 
 #define ICACHE_STATUS                  (CONFIG_SYS_INIT_RAM_ADDR + \
-                                        CONFIG_SYS_INIT_RAM_END - 8)
+                                        CONFIG_SYS_INIT_RAM_SIZE - 8)
 #define DCACHE_STATUS                  (CONFIG_SYS_INIT_RAM_ADDR + \
-                                        CONFIG_SYS_INIT_RAM_END - 4)
+                                        CONFIG_SYS_INIT_RAM_SIZE - 4)
 #define CONFIG_SYS_ICACHE_INV          (CF_CACR_CINV + CF_CACR_DCM)
 #define CONFIG_SYS_CACHE_ACR0          (CONFIG_SYS_SDRAM_BASE | \
                                         CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \