configs: stm32mp1: Restore boot SPL from sdcard for Engicam i.Core STM32MP1 C.TOUCH 2.0

[J-u-boot.git] / configs / chiliboard_defconfig

diff --git a/configs/chiliboard_defconfig b/configs/chiliboard_defconfig
index 06642d282d1f7187805dfbfeb1a15fece922bc76..8cb6b34ce76b7e1166cab11f627ce0483ff8690a 100644 (file)
--- a/configs/chiliboard_defconfig
+++ b/configs/chiliboard_defconfig
@@ -3,8 +3,6 @@ CONFIG_ARCH_CPU_INIT=y
 CONFIG_ARCH_OMAP2PLUS=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4030fef0
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x20000
 CONFIG_DM_GPIO=y
@@ -24,6 +22,7 @@ CONFIG_BOOTCOMMAND="run mmcboot; run nandboot; run netboot"
 CONFIG_DEFAULT_FDT_FILE="am335x-chiliboard.dtb"
 CONFIG_SYS_CONSOLE_INFO_QUIET=y
 CONFIG_ARCH_MISC_INIT=y
+CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_SYS_MALLOC=y
 CONFIG_SPL_SYS_MALLOC_SIZE=0x800000
 CONFIG_SPL_I2C=y
@@ -32,9 +31,7 @@ CONFIG_SPL_NAND_ECC=y
 CONFIG_SPL_NAND_BASE=y
 CONFIG_SPL_POWER=y
 CONFIG_SPL_WATCHDOG=y
-CONFIG_SYS_MAXARGS=64
 CONFIG_CMD_ASKENV=y
-# CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
@@ -55,7 +52,7 @@ CONFIG_NET_RETRY_COUNT=10
 CONFIG_BOOTP_SEND_HOSTNAME=y
 CONFIG_BOOTCOUNT_LIMIT=y
 CONFIG_SYS_BOOTCOUNT_BE=y
-CONFIG_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
 CONFIG_SPL_SYS_I2C_LEGACY=y
 CONFIG_MISC=y
 CONFIG_MMC_OMAP_HS=y
@@ -63,7 +60,6 @@ CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
 CONFIG_SYS_NAND_ONFI_DETECTION=y
-CONFIG_SYS_NAND_PAGE_COUNT=0x40
 CONFIG_SYS_NAND_PAGE_SIZE=0x800
 CONFIG_SYS_NAND_OOBSIZE=0x40
 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y