configs: stm32mp1: Restore boot SPL from sdcard for Engicam i.Core STM32MP1 C.TOUCH 2.0

[J-u-boot.git] / configs / tplink_wdr4300_defconfig

diff --git a/configs/tplink_wdr4300_defconfig b/configs/tplink_wdr4300_defconfig
index 1f7b65a66591dc141331184a62c4aa246a63ba67..816488b5154fcd84cc5851a4e3e5af541e6287c0 100644 (file)
--- a/configs/tplink_wdr4300_defconfig
+++ b/configs/tplink_wdr4300_defconfig
@@ -1,12 +1,14 @@
 CONFIG_MIPS=y
-CONFIG_SYS_TEXT_BASE=0xA1000000
+CONFIG_TEXT_BASE=0xA1000000
 CONFIG_SYS_MALLOC_LEN=0x40000
-CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xbd007fff
 CONFIG_ENV_SIZE=0x10000
 CONFIG_DEFAULT_DEVICE_TREE="tplink_wdr4300"
 CONFIG_SYS_LOAD_ADDR=0xa1000000
 CONFIG_ARCH_ATH79=y
 CONFIG_BOARD_TPLINK_WDR4300=y
+CONFIG_SYS_MIPS_TIMER_FREQ=280000000
 CONFIG_SYS_MEMTEST_START=0x80100000
 CONFIG_SYS_MEMTEST_END=0x83f00000
 CONFIG_BOOTDELAY=3
@@ -16,11 +18,12 @@ CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="dhcp 192.168.1.1:wdr4300.fit && bootm $loadaddr"
 CONFIG_DISPLAY_CPUINFO=y
 CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SYS_MALLOC_BOOTPARAMS=y
 CONFIG_HUSH_PARSER=y
+CONFIG_SYS_MAXARGS=32
 # CONFIG_CMD_ELF is not set
 # CONFIG_CMD_XIMG is not set
 CONFIG_CMD_MEMTEST=y
-# CONFIG_CMD_FLASH is not set
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_DHCP=y
@@ -44,7 +47,6 @@ CONFIG_SPI_FLASH_SST=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_SPI_FLASH_DATAFLASH=y
 CONFIG_SPI_FLASH_MTD=y
-CONFIG_DM_ETH=y
 CONFIG_PHY_GIGE=y
 CONFIG_AG7XXX=y
 CONFIG_PINCTRL=y