configs: stm32mp1: Restore boot SPL from sdcard for Engicam i.Core STM32MP1 C.TOUCH 2.0

[J-u-boot.git] / configs / mscc_ocelot_defconfig

diff --git a/configs/mscc_ocelot_defconfig b/configs/mscc_ocelot_defconfig
index 5b1d7919918f02537bf5b889b402c71893f64cb5..23aff7ea462069d60609fc33a7337e9649b0bfba 100644 (file)
--- a/configs/mscc_ocelot_defconfig
+++ b/configs/mscc_ocelot_defconfig
@@ -1,26 +1,29 @@
 CONFIG_MIPS=y
-CONFIG_SYS_TEXT_BASE=0x40000000
+CONFIG_TEXT_BASE=0x40000000
 CONFIG_SYS_MALLOC_LEN=0x1f0000
-CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x100000
 CONFIG_ENV_SECT_SIZE=0x40000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="ocelot_pcb123"
-CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_SYS_BOOTM_LEN=0x1000000
+CONFIG_SYS_LOAD_ADDR=0x100000
 CONFIG_DEBUG_UART_BASE=0x70100000
 CONFIG_DEBUG_UART_CLOCK=250000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_ENV_OFFSET_REDUND=0x140000
-CONFIG_SYS_LOAD_ADDR=0x100000
 CONFIG_ARCH_MSCC=y
-CONFIG_SYS_LITTLE_ENDIAN=y
+CONFIG_SYS_MIPS_TIMER_FREQ=250000000
 CONFIG_DEBUG_UART=y
 CONFIG_SYS_MEMTEST_START=0x80000000
 CONFIG_SYS_MEMTEST_END=0x9fc00000
+CONFIG_SYS_LITTLE_ENDIAN=y
 CONFIG_FIT=y
 CONFIG_BOOTDELAY=3
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200"
+CONFIG_SYS_CBSIZE=256
+CONFIG_SYS_PBSIZE=282
 CONFIG_LOGLEVEL=7
 CONFIG_BOARD_TYPES=y
 CONFIG_DISPLAY_CPUINFO=y
@@ -35,13 +38,11 @@ CONFIG_SYS_PROMPT="ocelot # "
 CONFIG_CMD_MD5SUM=y
 CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_MEMTEST=y
-# CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_MTD=y
 CONFIG_CMD_SPI=y
-CONFIG_CMD_DHCP=y
 # CONFIG_NET_TFTP_VARS is not set
-# CONFIG_CMD_NFS is not set
+CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_MTDPARTS=y
 CONFIG_MTDIDS_DEFAULT="nor0=spi_flash"
@@ -70,7 +71,6 @@ CONFIG_SPI_FLASH_MACRONIX=y
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_SPI_FLASH_MTD=y
-CONFIG_DM_ETH=y
 CONFIG_MSCC_OCELOT_SWITCH=y
 CONFIG_PINCTRL=y
 CONFIG_PINCONF=y