include/: Remove obsolete references to CONFIG_COMMANDS

[J-u-boot.git] / include / configs / TQM85xx.h

diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index bc3b9aa1d0a3483230eaba5d375d3b68884c3c7a..b17d5e30fc950d68fc3ede1565615be2747addbe 100644 (file)
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -186,18 +186,23 @@
 #define CFG_BAUDRATE_TABLE  \
        {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
 
-/* Use the HUSH parser */
-#define CFG_HUSH_PARSER
+#define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
+#define CFG_HUSH_PARSER                1       /* Use the HUSH parser          */
 #ifdef CFG_HUSH_PARSER
-#define CFG_PROMPT_HUSH_PS2 "> "
+#define        CFG_PROMPT_HUSH_PS2     "> "
 #endif
 
-/* I2C */
+
+/*
+ * I2C
+ */
+#define CONFIG_FSL_I2C         /* Use FSL common I2C driver */
 #define CONFIG_HARD_I2C                        /* I2C with hardware support    */
 #undef CONFIG_SOFT_I2C                 /* I2C bit-banged               */
 #define CFG_I2C_SPEED          400000  /* I2C speed and slave address  */
 #define CFG_I2C_SLAVE          0x7F
 #define CFG_I2C_NOPROBES       {0x48}  /* Don't probe these addrs      */
+#define CFG_I2C_OFFSET         0x3000
 
 /* I2C RTC */
 #define CONFIG_RTC_DS1337              /* Use ds1337 rtc via i2c       */
@@ -253,10 +258,10 @@
 #define CONFIG_NET_MULTI       1
 
 #define CONFIG_MII             1       /* MII PHY management           */
-#define CONFIG_MPC85XX_TSEC1   1
-#define CONFIG_MPC85XX_TSEC1_NAME      "TSEC0"
-#define CONFIG_MPC85XX_TSEC2   1
-#define CONFIG_MPC85XX_TSEC2_NAME      "TSEC1"
+#define CONFIG_TSEC1   1
+#define CONFIG_TSEC1_NAME      "TSEC0"
+#define CONFIG_TSEC2   1
+#define CONFIG_TSEC2_NAME      "TSEC1"
 #define TSEC1_PHY_ADDR         2
 #define TSEC2_PHY_ADDR         1
 #define TSEC1_PHYIDX           0
@@ -352,24 +357,26 @@
 
 #define        CONFIG_TIMESTAMP                /* Print image info with ts     */
 
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_MII
+
 #if defined(CONFIG_PCI)
-# define ADD_PCI_CMD           (CFG_CMD_PCI)
-#else
-# define ADD_PCI_CMD           0
+    #define CONFIG_CMD_PCI
 #endif
 
-#define CONFIG_COMMANDS                (CONFIG_CMD_DFL | \
-                                CFG_CMD_DHCP   | \
-                                CFG_CMD_NFS    | \
-                                CFG_CMD_SNTP   | \
-                                ADD_PCI_CMD    | \
-                                CFG_CMD_I2C    | \
-                                CFG_CMD_DATE   | \
-                                CFG_CMD_EEPROM | \
-                                CFG_CMD_DTT    | \
-                                CFG_CMD_MII    | \
-                                CFG_CMD_PING   )
-#include <cmd_confdefs.h>
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled            */
 
@@ -380,7 +387,7 @@
 #define CFG_LOAD_ADDR  0x2000000       /* default load address         */
 #define CFG_PROMPT     "=> "           /* Monitor Command Prompt       */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
     #define CFG_CBSIZE 1024            /* Console I/O Buffer Size      */
 #else
     #define CFG_CBSIZE 256             /* Console I/O Buffer Size      */
@@ -401,7 +408,7 @@
 /* Cache Configuration */
 #define CFG_DCACHE_SIZE                32768
 #define CFG_CACHELINE_SIZE     32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /*log base 2 of the above value */
 #endif
 
@@ -413,7 +420,7 @@
 #define BOOTFLAG_COLD  0x01            /* Power-On: Boot from FLASH    */
 #define BOOTFLAG_WARM  0x02            /* Software reboot              */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port*/
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use     */
 #endif