binman: add documentation for binman sign option

[J-u-boot.git] / configs / P1020RDB-PD_defconfig

diff --git a/configs/P1020RDB-PD_defconfig b/configs/P1020RDB-PD_defconfig
index 31f0c9a1aabcf4182ed28d0b094bb863e408d91c..5377aba4ef34dcd42a2c778bb0a4ad25104f8b09 100644 (file)
--- a/configs/P1020RDB-PD_defconfig
+++ b/configs/P1020RDB-PD_defconfig
@@ -1,24 +1,27 @@
 CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
+CONFIG_TEXT_BASE=0xEFF40000
 CONFIG_SYS_MALLOC_LEN=0x100000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DEFAULT_DEVICE_TREE="p1020rdb-pd"
 CONFIG_ENV_ADDR=0xEFF20000
 CONFIG_MPC85xx=y
+CONFIG_SYS_INIT_RAM_LOCK=y
 # CONFIG_CMD_ERRATA is not set
 CONFIG_TARGET_P1020RDB_PD=y
 CONFIG_MPC85XX_HAVE_RESET_VECTOR=y
+CONFIG_L2_CACHE=y
 CONFIG_ENABLE_36BIT_PHYS=y
-CONFIG_SYS_MPC85XX_NO_RESETVEC=y
+CONFIG_USE_UBOOTPATH=y
 CONFIG_PCIE1=y
 CONFIG_PCIE2=y
+CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_MP=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_FSL_FIXED_MMC_LOCATION=y
+CONFIG_NO_PBL=y
 CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw rootdelay=30 console=$consoledev,$baudrate $othbootargs;usb start;ext2load usb 0:1 $loadaddr /boot/$bootfile;ext2load usb 0:1 $fdtaddr /boot/$fdtfile;bootm $loadaddr - $fdtaddr"
@@ -32,6 +35,8 @@ CONFIG_CMD_IMLS=y
 CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
 CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
+CONFIG_LOADS_ECHO=y
+CONFIG_SYS_LOADS_BAUD_CHANGE=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_MII=y
@@ -49,6 +54,8 @@ CONFIG_USE_BOOTFILE=y
 CONFIG_BOOTFILE="uImage"
 CONFIG_USE_ETHPRIME=y
 CONFIG_ETHPRIME="eTSEC1"
+CONFIG_USE_HOSTNAME=y
+CONFIG_USE_ROOTPATH=y
 CONFIG_LBA48=y
 CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_SYS_SPD_BUS_NUM=1
@@ -99,10 +106,12 @@ CONFIG_DM_MDIO=y
 CONFIG_PHY_GIGE=y
 CONFIG_E1000=y
 CONFIG_MII=y
+CONFIG_VSC7385_ENET=y
 CONFIG_TSEC_ENET=y
 CONFIG_PCIE_FSL=y
 CONFIG_DM_RTC=y
-CONFIG_SYS_NS16550=y
+CONFIG_RTC_PT7C4338=y
+CONFIG_SYS_NS16550_SERIAL=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_ESPI=y