Merge branch 'master' of git://git.denx.de/u-boot-uniphier

[J-u-boot.git] / include / configs / MPC8323ERDB.h

diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h
index 40e95464316de0c3b2cb89d500d1ee58d2a0ea2c..7547c12996784a7f8590d8f91c432e1db5b8bc05 100644 (file)
--- a/include/configs/MPC8323ERDB.h
+++ b/include/configs/MPC8323ERDB.h
@@ -9,12 +9,14 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
+
 /*
  * High Level Configuration Options
  */
 #define CONFIG_E300            1       /* E300 family */
 #define CONFIG_QE              1       /* Has QE */
-#define CONFIG_MPC83xx         1       /* MPC83xx family */
 #define CONFIG_MPC832x         1       /* MPC832x CPU specific */
 
 #define        CONFIG_SYS_TEXT_BASE    0xFE000000
@@ -156,7 +158,7 @@
 
 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
 #define CONFIG_SYS_MONITOR_LEN (384 * 1024)    /* Reserve 384 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN  (128 * 1024)    /* Reserved for malloc */
+#define CONFIG_SYS_MALLOC_LEN  (256 * 1024)    /* Reserved for malloc */
 
 /*
  * Initial RAM Base Address Setup
@@ -226,9 +228,6 @@
 #define CONFIG_AUTO_COMPLETE           /* add autocompletion support   */
 /* Use the HUSH parser */
 #define CONFIG_SYS_HUSH_PARSER
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#endif
 
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT       1
@@ -236,13 +235,12 @@
 #define CONFIG_OF_STDOUT_VIA_ALIAS     1
 
 /* I2C */
-#define CONFIG_HARD_I2C                /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C         /* I2C bit-banged */
-#define CONFIG_FSL_I2C
-#define CONFIG_SYS_I2C_SPEED   400000  /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE   0x7F
-#define CONFIG_SYS_I2C_NOPROBES        {0x51}  /* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET  0x3000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED       400000
+#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET      0x3000
+#define CONFIG_SYS_I2C_NOPROBES                { {0, 0x51} }
 
 /*
  * Config on-board EEPROM
@@ -267,6 +265,7 @@
 #define CONFIG_SYS_PCI1_IO_SIZE                0x04000000      /* 64M */
 
 #ifdef CONFIG_PCI
+#define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_PCI_SKIP_HOST_BRIDGE
 #define CONFIG_PCI_PNP         /* do pci plug-and-play */
 
@@ -336,8 +335,6 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_EEPROM
@@ -346,10 +343,6 @@
 #if defined(CONFIG_PCI)
        #define CONFIG_CMD_PCI
 #endif
-#if defined(CONFIG_SYS_RAMBOOT)
-       #undef CONFIG_CMD_SAVEENV
-       #undef CONFIG_CMD_LOADS
-#endif
 
 #undef CONFIG_WATCHDOG         /* watchdog disabled */
 
@@ -358,7 +351,6 @@
  */
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
-#define CONFIG_SYS_PROMPT      "=> "   /* Monitor Command Prompt */
 
 #if (CONFIG_CMD_KGDB)
        #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size */
@@ -371,7 +363,6 @@
 #define CONFIG_SYS_MAXARGS     16              /* max number of command args */
                                /* Boot Argument Buffer Size */
 #define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_HZ          1000    /* decrementer freq: 1ms ticks */
 
 /*
  * For booting Linux, the board info and command line data
@@ -486,7 +477,6 @@
 
 #if (CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed of kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif
 
 /*
@@ -517,18 +507,20 @@
 #define CONFIG_BOOTDELAY       6       /* -1 disables auto-boot */
 #define CONFIG_BAUDRATE                115200
 
-#define XMK_STR(x)     #x
-#define MK_STR(x)      XMK_STR(x)
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "netdev=" CONFIG_NETDEV "\0"                                    \
        "uboot=" CONFIG_UBOOTPATH "\0"                                  \
        "tftpflash=tftp $loadaddr $uboot;"                              \
-               "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "\
-               "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "   \
-               "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; "\
-               "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "\
-               "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0"\
+               "protect off " __stringify(CONFIG_SYS_TEXT_BASE)        \
+                       " +$filesize; " \
+               "erase " __stringify(CONFIG_SYS_TEXT_BASE)              \
+                       " +$filesize; " \
+               "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)     \
+                       " $filesize; "  \
+               "protect on " __stringify(CONFIG_SYS_TEXT_BASE)         \
+                       " +$filesize; " \
+               "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE)    \
+                       " $filesize\0"  \
        "fdtaddr=780000\0"                                              \
        "fdtfile=" CONFIG_FDTFILE "\0"                                  \
        "ramdiskaddr=1000000\0"                                         \
@@ -557,7 +549,4 @@
        "tftp $fdtaddr $fdtfile;"                                       \
        "bootm $loadaddr $ramdiskaddr $fdtaddr"
 
-#undef MK_STR
-#undef XMK_STR
-
 #endif /* __CONFIG_H */