arm: Finish migration of CONFIG_MACH_TYPE

[J-u-boot.git] / include / configs / brppt1.h

diff --git a/include/configs/brppt1.h b/include/configs/brppt1.h
index 5a40f3abd12573cb3b0e68c4602deaa952e8c1ce..9fb861b9a0d110d7e8e56328feb7b35446c912f4 100644 (file)
--- a/include/configs/brppt1.h
+++ b/include/configs/brppt1.h
@@ -13,9 +13,9 @@
 
 #include <configs/bur_cfg_common.h>
 #include <configs/bur_am335x_common.h>
+#include <linux/stringify.h>
 /* ------------------------------------------------------------------------- */
 /* memory */
-#define CONFIG_SYS_MALLOC_LEN          (5 * 1024 * 1024)
 #define CONFIG_SYS_BOOTM_LEN           SZ_32M
 
 /* Clock Defines */
@@ -24,13 +24,6 @@
 
 #define CONFIG_POWER_TPS65217
 
-/* Support both device trees and ATAGs. */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-/*#define CONFIG_MACH_TYPE             3589*/
-#define CONFIG_MACH_TYPE               0xFFFFFFFF /* TODO: check with kernel*/
-
 /*
  * When we have NAND flash we expect to be making use of mtdparts,
  * both for ease of use in U-Boot and for passing information on to
@@ -46,20 +39,17 @@
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0x80    /* 64KiB */
 
 /* NAND */
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS                0x140000
-#endif /* CONFIG_NAND */
+#endif /* CONFIG_MTD_RAW_NAND */
 #endif /* CONFIG_SPL_OS_BOOT */
 
-#ifdef CONFIG_NAND
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_ECC
+#ifdef CONFIG_MTD_RAW_NAND
 #define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    0x80000
-#endif /* CONFIG_NAND */
+#endif /* CONFIG_MTD_RAW_NAND */
 
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 #define NANDTGTS \
 "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
 "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
@@ -74,7 +64,7 @@
 "b_tgts_pme=usb0 nand net\0"
 #else
 #define NANDTGTS ""
-#endif /* CONFIG_NAND */
+#endif /* CONFIG_MTD_RAW_NAND */
 
 #define MMCSPI_TGTS \
 "t30args#0=setenv bootargs ${optargs_rot} ${optargs} console=${console} " \
@@ -147,7 +137,7 @@ NANDTGTS \
 " if test ${b_break} = 1; then; exit; fi; done\0"
 #endif /* !CONFIG_SPL_BUILD*/
 
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 /*
  * GPMC  block.  We support 1 device and the physical address to
  * access CS0 at is 0x8000000.
@@ -177,28 +167,10 @@ NANDTGTS \
 #define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
 
 #define CONFIG_NAND_OMAP_GPMC_WSCFG    1
-#endif /* CONFIG_NAND */
-
-#if defined(CONFIG_SPI)
-/* SPI Flash */
-#define CONFIG_SYS_SPI_U_BOOT_OFFS             0x40000
-/* Environment */
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_ENV_OFFSET_REDUND               (CONFIG_ENV_OFFSET + \
-                                                CONFIG_ENV_SECT_SIZE)
-#elif defined(CONFIG_ENV_IS_IN_MMC)
-#define CONFIG_SYS_MMC_ENV_DEV         1
-#define CONFIG_SYS_MMC_ENV_PART                2
-#define CONFIG_ENV_OFFSET              0x40000 /* TODO: Adresse definieren */
-#define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-
-#elif defined(CONFIG_ENV_IS_IN_NAND)
-/* No NAND env support in SPL */
-#define CONFIG_ENV_OFFSET              0x60000
+#endif /* CONFIG_MTD_RAW_NAND */
+
+#if defined(CONFIG_ENV_IS_IN_NAND)
 #define CONFIG_SYS_ENV_SECT_SIZE       CONFIG_ENV_SIZE
-#else
-#error "no storage for Environment defined!"
 #endif
 
 #endif /* ! __CONFIG_BRPPT1_H__ */