arm: Remove spear310 boards

[J-u-boot.git] / include / configs / spear-common.h

diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h
index 77b80df2a63e1e8bcac4ea5aa4836726fec27c1e..122990e6348999ccf1279003d704f658db4bf883 100644 (file)
--- a/include/configs/spear-common.h
+++ b/include/configs/spear-common.h
@@ -1,8 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2009
  * Vipin Kumar, STMicroelectronics, <[email protected]>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef _SPEAR_COMMON_H
@@ -12,12 +11,9 @@
  */
 
 /* U-Boot Load Address */
-#define CONFIG_SYS_TEXT_BASE                   0x00700000
 
 /* Ethernet driver configuration */
-#define CONFIG_MII
 #define CONFIG_PHY_RESET_DELAY                 10000           /* in usec */
-#define CONFIG_PHY_GIGE                        /* Include GbE speed/duplex detection */
 
 /* USBD driver configuration */
 #if defined(CONFIG_SPEAR_USBTTY)
@@ -37,10 +33,6 @@
 #define CONFIG_SYS_I2C
 #if defined(CONFIG_SPEAR600)
 #define CONFIG_SYS_I2C_BASE                    0xD0200000
-#elif defined(CONFIG_SPEAR300)
-#define CONFIG_SYS_I2C_BASE                    0xD0180000
-#elif defined(CONFIG_SPEAR310)
-#define CONFIG_SYS_I2C_BASE                    0xD0180000
 #elif defined(CONFIG_SPEAR320)
 #define CONFIG_SYS_I2C_BASE                    0xD0180000
 #endif
@@ -77,10 +69,7 @@
  * Serial Configuration (PL011)
  * CONFIG_PL01x_PORTS is defined in specific files
  */
-#define CONFIG_PL011_SERIAL
 #define CONFIG_PL011_CLOCK                     (48 * 1000 * 1000)
-#define CONFIG_CONS_INDEX                      0
-#define CONFIG_BAUDRATE                                115200
 #define CONFIG_SYS_BAUDRATE_TABLE              { 9600, 19200, 38400, \
                                                57600, 115200 }
 
@@ -88,23 +77,13 @@
 
 /* NAND FLASH Configuration */
 #define CONFIG_SYS_NAND_SELF_INIT
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
 #define CONFIG_NAND_FSMC
 #define CONFIG_SYS_MAX_NAND_DEVICE             1
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 
-/*
- * Command support defines
- */
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_SAVES
-
 /*
  * Default Environment Varible definitions
  */
-#define CONFIG_ENV_OVERWRITE
 
 /*
  * U-Boot Environment placing definitions.
@@ -115,7 +94,6 @@
  * Environment is in serial NOR flash
  */
 #define CONFIG_SYS_MONITOR_LEN                 0x00040000
-#define CONFIG_ENV_SECT_SIZE                   0x00010000
 #define CONFIG_FSMTDBLK                                "/dev/mtdblock3 "
 
 #define CONFIG_BOOTCOMMAND                     "bootm 0xf8050000"
@@ -125,21 +103,16 @@
  * Environment is in parallel NOR flash
  */
 #define CONFIG_SYS_MONITOR_LEN                 0x00060000
-#define CONFIG_ENV_SECT_SIZE                   0x00020000
 #define CONFIG_FSMTDBLK                                "/dev/mtdblock3 "
 
 #define CONFIG_BOOTCOMMAND                     "cp.b 0x50080000 0x1600000 " \
                                                "0x4C0000; bootm 0x1600000"
 #endif
-
-#define CONFIG_ENV_ADDR                                (CONFIG_SYS_FLASH_BASE + \
-                                               CONFIG_SYS_MONITOR_LEN)
 #elif defined(CONFIG_ENV_IS_IN_NAND)
 /*
  * Environment is in NAND
  */
 
-#define CONFIG_ENV_OFFSET                      0x60000
 #define CONFIG_ENV_RANGE                       0x10000
 #define CONFIG_FSMTDBLK                                "/dev/mtdblock7 "
 
@@ -148,11 +121,6 @@
                                                "bootm 0x1600000"
 #endif
 
-#define CONFIG_BOOTARGS                                "console=ttyAMA0,115200 " \
-                                               "mem=128M " \
-                                               "root="CONFIG_FSMTDBLK \
-                                               "rootfstype=jffs2"
-
 #define CONFIG_NFSBOOTCOMMAND                                          \
        "bootp; "                                                       \
        "setenv bootargs root=/dev/nfs rw "                             \
@@ -167,32 +135,19 @@
                "console=ttyAMA0,115200 $(othbootargs);"                \
        CONFIG_BOOTCOMMAND
 
-#define CONFIG_ENV_SIZE                                0x02000
 #define CONFIG_SYS_MONITOR_BASE                        CONFIG_SYS_TEXT_BASE
 
 /* Miscellaneous configurable options */
-#define CONFIG_ARCH_CPU_INIT
 #define CONFIG_BOOT_PARAMS_ADDR                        0x00000100
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_MISC_INIT_R
 
-#define CONFIG_SYS_MEMTEST_START               0x00800000
-#define CONFIG_SYS_MEMTEST_END                 0x04000000
 #define CONFIG_SYS_MALLOC_LEN                  (1024*1024)
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_CBSIZE                      256
-#define CONFIG_SYS_PBSIZE                      (CONFIG_SYS_CBSIZE + \
-                                               sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS                     16
-#define CONFIG_SYS_BARGSIZE                    CONFIG_SYS_CBSIZE
 #define CONFIG_SYS_LOAD_ADDR                   0x00800000
 
 #define CONFIG_SYS_FLASH_EMPTY_INFO
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS                   1
 #define PHYS_SDRAM_1                           0x00000000
 #define PHYS_SDRAM_1_MAXSIZE                   0x40000000