configs: stm32mp1: Restore boot SPL from sdcard for Engicam i.Core STM32MP1 C.TOUCH 2.0

[J-u-boot.git] / configs / M5235EVB_defconfig

diff --git a/configs/M5235EVB_defconfig b/configs/M5235EVB_defconfig
index fbd3e086ec3be38cbdccae8248a93540e37069aa..c76d6556dbef582aeeefc7c16441d777fda9cf3a 100644 (file)
--- a/configs/M5235EVB_defconfig
+++ b/configs/M5235EVB_defconfig
@@ -4,27 +4,27 @@ CONFIG_SYS_MALLOC_LEN=0x20000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_SECT_SIZE=0x2000
 CONFIG_DEFAULT_DEVICE_TREE="M5235EVB"
-CONFIG_SYS_PROMPT="-> "
+CONFIG_SYS_MONITOR_LEN=262144
+CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_SYS_LOAD_ADDR=0x20000
+CONFIG_WATCHDOG_TIMEOUT_MSECS=5000
 CONFIG_ENV_ADDR=0xFFE04000
 CONFIG_TARGET_M5235EVB=y
-CONFIG_SYS_MONITOR_LEN=262144
 CONFIG_SYS_MONITOR_BASE=0xFFE00400
 CONFIG_BOOTDELAY=1
+CONFIG_SYS_PBSIZE=276
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_SYS_MALLOC_BOOTPARAMS=y
 # CONFIG_CMDLINE_EDITING is not set
 # CONFIG_AUTO_COMPLETE is not set
-CONFIG_SYS_PBSIZE=276
-CONFIG_SYS_BOOTM_LEN=0x1000000
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_I2C=y
 # CONFIG_CMD_LOADB is not set
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_PCI=y
 # CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
 CONFIG_BOOTP_BOOTFILESIZE=y
+CONFIG_CMD_DHCP=y
 CONFIG_CMD_MII=y
 CONFIG_MII_INIT=y
 CONFIG_CMD_PING=y
@@ -45,11 +45,9 @@ CONFIG_NETMASK="255.255.255.0"
 CONFIG_USE_SERVERIP=y
 CONFIG_SERVERIP="192.162.1.1"
 CONFIG_SYS_RX_ETH_BUFFER=8
-CONFIG_SYS_I2C_LEGACY=y
+CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_FSL=y
-CONFIG_SYS_FSL_I2C_OFFSET=0x300
-CONFIG_SYS_I2C_SLAVE=0x7F
-CONFIG_SYS_I2C_SPEED=80000
+CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_SYS_FLASH_CFI_WIDTH_16BIT=y
@@ -60,4 +58,3 @@ CONFIG_SYS_MAX_FLASH_SECT=137
 CONFIG_MCFFEC=y
 CONFIG_MII=y
 CONFIG_MCFUART=y
-CONFIG_WATCHDOG_TIMEOUT_MSECS=5000