#define THERM_WRITE_TL 0x02
#define THERM_WRITE_TH 0x01
-#define CFG_CPU 2
-#define CFG_1SHOT 1
-#define CFG_STANDALONE 0
+#define CONFIG_SYS_CPU 2
+#define CONFIG_SYS_1SHOT 1
+#define CONFIG_SYS_STANDALONE 0
struct therm {
int hi;
#define SM501_POWER_MODE0_GATE 0x00000040UL
#define SM501_POWER_MODE1_GATE 0x00000048UL
#define POWER_MODE_GATE_GPIO_PWM_I2C 0x00000040UL
-#define SM501_GPIO_DATA_LOW 0x00010000UL
+#define SM501_GPIO_DATA_LOW 0x00010000UL
#define SM501_GPIO_DATA_HIGH 0x00010004UL
#define SM501_GPIO_DATA_DIR_LOW 0x00010008UL
#define SM501_GPIO_DATA_DIR_HIGH 0x0001000CUL
if (rc > 0x0F)
return -1;
- printf ("0x%x\n", rc);
+ printf ("0x%lx\n", rc);
return 0;
}
therm.hi <<= 1;
therm.lo <<= 1;
ds1620_write_state (&therm);
- ds1620_out (THERM_WRITE_CONFIG, 8, CFG_STANDALONE);
+ ds1620_out (THERM_WRITE_CONFIG, 8, CONFIG_SYS_STANDALONE);
return 0;
}
}
static int init_done = 0;
int i;
struct mpc5xxx_mscan *can1 =
- (struct mpc5xxx_mscan *) (CFG_MBAR + 0x0900);
+ (struct mpc5xxx_mscan *) (CONFIG_SYS_MBAR + 0x0900);
struct mpc5xxx_mscan *can2 =
- (struct mpc5xxx_mscan *) (CFG_MBAR + 0x0980);
+ (struct mpc5xxx_mscan *) (CONFIG_SYS_MBAR + 0x0980);
/* GPIO configuration of the CAN pins is done in BC3450.h */
{
int i;
struct mpc5xxx_mscan *can1 =
- (struct mpc5xxx_mscan *) (CFG_MBAR + 0x0900);
+ (struct mpc5xxx_mscan *) (CONFIG_SYS_MBAR + 0x0900);
struct mpc5xxx_mscan *can2 =
- (struct mpc5xxx_mscan *) (CFG_MBAR + 0x0980);
+ (struct mpc5xxx_mscan *) (CONFIG_SYS_MBAR + 0x0980);
/* send a message on CAN1 */
can1->cantbsel = 0x01;