]> Git Repo - J-u-boot.git/blobdiff - configs/ls1012afrwy_tfa_defconfig
configs: stm32mp1: Restore boot SPL from sdcard for Engicam i.Core STM32MP1 C.TOUCH 2.0
[J-u-boot.git] / configs / ls1012afrwy_tfa_defconfig
index b75103651580e9f33def1530050550f324444fe4..0ffae31dae526124d06bedad8cdd8faa1efeb945 100644 (file)
@@ -1,27 +1,32 @@
 CONFIG_ARM=y
+CONFIG_COUNTER_FREQUENCY=25000000
 CONFIG_TARGET_LS1012AFRWY=y
 CONFIG_TFABOOT=y
-CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_TEXT_BASE=0x82000000
+CONFIG_SYS_MALLOC_LEN=0x500000
 CONFIG_NR_DRAM_BANKS=2
-CONFIG_SYS_MEMTEST_START=0x80000000
-CONFIG_SYS_MEMTEST_END=0x9fffffff
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x1D0000
 CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_SYS_MALLOC_LEN=0x500000
 CONFIG_DM_GPIO=y
 CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-frwy"
 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
 CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
+CONFIG_PCI=y
 CONFIG_AHCI=y
-CONFIG_DISTRO_DEFAULTS=y
+CONFIG_LAYERSCAPE_NS_ACCESS=y
+CONFIG_PCIE1=y
+CONFIG_SYS_MEMTEST_START=0x80000000
+CONFIG_SYS_MEMTEST_END=0x9fffffff
 # CONFIG_SYS_MALLOC_F is not set
 CONFIG_FIT_VERBOSE=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTDELAY=10
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
 CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
+CONFIG_SYS_PBSIZE=532
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_CMD_GREPENV=y
@@ -40,8 +45,9 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_DM=y
+CONFIG_SATA=y
 CONFIG_SATA_CEVA=y
+CONFIG_MPC8XXX_GPIO=y
 CONFIG_DM_I2C=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
 CONFIG_FSL_ESDHC=y
@@ -50,14 +56,11 @@ CONFIG_DM_SPI_FLASH=y
 # CONFIG_SPI_FLASH_BAR is not set
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_FSL_PFE=y
-CONFIG_DM_ETH=y
 CONFIG_E1000=y
-CONFIG_NVME=y
-CONFIG_PCI=y
+CONFIG_NVME_PCI=y
 CONFIG_PCIE_LAYERSCAPE_RC=y
 CONFIG_DM_RTC=y
-CONFIG_DM_SCSI=y
-CONFIG_SYS_NS16550=y
+CONFIG_SYS_NS16550_SERIAL=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_QSPI=y
This page took 0.028564 seconds and 4 git commands to generate.