* Added 16-bit nand support
* (C) 2004 Texas Instruments
*
- * Copyright 2010 Freescale Semiconductor
+ * Copyright 2010, 2012 Freescale Semiconductor
* The portions of this file whose copyright is held by Freescale and which
* are not considered a derived work of GPL v2-only code may be distributed
* and/or modified under the terms of the GNU General Public License as
last = off;
- datbuf = malloc(nand->writesize);
- oobbuf = malloc(nand->oobsize);
+ datbuf = memalign(ARCH_DMA_MINALIGN, nand->writesize);
+ oobbuf = memalign(ARCH_DMA_MINALIGN, nand->oobsize);
if (!datbuf || !oobbuf) {
puts("No memory for page buffer\n");
return 1;
loff_t *off, loff_t *size)
{
int ret;
- loff_t maxsize;
+ loff_t maxsize = 0;
if (argc == 0) {
*off = 0;
#ifdef CONFIG_CMD_NAND_LOCK_UNLOCK
static void print_status(ulong start, ulong end, ulong erasesize, int status)
{
+ /*
+ * Micron NAND flash (e.g. MT29F4G08ABADAH4) BLOCK LOCK READ STATUS is
+ * not the same as others. Instead of bit 1 being lock, it is
+ * #lock_tight. To make the driver support either format, ignore bit 1
+ * and use only bit 0 and bit 2.
+ */
printf("%08lx - %08lx: %08lx blocks %s%s%s\n",
start,
end - 1,
(end - start) / erasesize,
((status & NAND_LOCK_STATUS_TIGHT) ? "TIGHT " : ""),
- ((status & NAND_LOCK_STATUS_LOCK) ? "LOCK " : ""),
+ (!(status & NAND_LOCK_STATUS_UNLOCK) ? "LOCK " : ""),
((status & NAND_LOCK_STATUS_UNLOCK) ? "UNLOCK " : ""));
}
{
nand_info_t *nand = &nand_info[idx];
struct nand_chip *chip = nand->priv;
- const int bufsz = 32;
- char buf[bufsz];
+ char buf[32];
printf("Device %d: ", idx);
if (chip->numchips > 1)
setenv("nand_erasesize", buf);
}
-int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
+static int raw_access(nand_info_t *nand, ulong addr, loff_t off, ulong count,
+ int read)
+{
+ int ret = 0;
+
+ while (count--) {
+ /* Raw access */
+ mtd_oob_ops_t ops = {
+ .datbuf = (u8 *)addr,
+ .oobbuf = ((u8 *)addr) + nand->writesize,
+ .len = nand->writesize,
+ .ooblen = nand->oobsize,
+ .mode = MTD_OOB_RAW
+ };
+
+ if (read)
+ ret = nand->read_oob(nand, off, &ops);
+ else
+ ret = nand->write_oob(nand, off, &ops);
+
+ if (ret) {
+ printf("%s: error at offset %llx, ret %d\n",
+ __func__, (long long)off, ret);
+ break;
+ }
+
+ addr += nand->writesize + nand->oobsize;
+ off += nand->writesize;
+ }
+
+ return ret;
+}
+
+static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int i, ret = 0;
ulong addr;
if (strncmp(cmd, "read", 4) == 0 || strncmp(cmd, "write", 5) == 0) {
size_t rwsize;
+ ulong pagecount = 1;
int read;
+ int raw;
if (argc < 4)
goto usage;
read = strncmp(cmd, "read", 4) == 0; /* 1 = read, 0 = write */
printf("\nNAND %s: ", read ? "read" : "write");
- if (arg_off_size(argc - 3, argv + 3, &dev, &off, &size) != 0)
- return 1;
nand = &nand_info[dev];
- rwsize = size;
s = strchr(cmd, '.');
+
+ if (s && !strcmp(s, ".raw")) {
+ raw = 1;
+
+ if (arg_off(argv[3], &dev, &off, &size))
+ return 1;
+
+ if (argc > 4 && !str2long(argv[4], &pagecount)) {
+ printf("'%s' is not a number\n", argv[4]);
+ return 1;
+ }
+
+ if (pagecount * nand->writesize > size) {
+ puts("Size exceeds partition or device limit\n");
+ return -1;
+ }
+
+ rwsize = pagecount * (nand->writesize + nand->oobsize);
+ } else {
+ if (arg_off_size(argc - 3, argv + 3, &dev,
+ &off, &size) != 0)
+ return 1;
+
+ rwsize = size;
+ }
+
if (!s || !strcmp(s, ".jffs2") ||
!strcmp(s, ".e") || !strcmp(s, ".i")) {
if (read)
return 1;
}
ret = nand_write_skip_bad(nand, off, &rwsize,
- (u_char *)addr, WITH_YAFFS_OOB);
+ (u_char *)addr,
+ WITH_INLINE_OOB);
#endif
} else if (!strcmp(s, ".oob")) {
/* out-of-band data */
ret = nand->read_oob(nand, off, &ops);
else
ret = nand->write_oob(nand, off, &ops);
- } else if (!strcmp(s, ".raw")) {
- /* Raw access */
- mtd_oob_ops_t ops = {
- .datbuf = (u8 *)addr,
- .oobbuf = ((u8 *)addr) + nand->writesize,
- .len = nand->writesize,
- .ooblen = nand->oobsize,
- .mode = MTD_OOB_RAW
- };
-
- rwsize = nand->writesize + nand->oobsize;
-
- if (read)
- ret = nand->read_oob(nand, off, &ops);
- else
- ret = nand->write_oob(nand, off, &ops);
+ } else if (raw) {
+ ret = raw_access(nand, addr, off, pagecount, read);
} else {
printf("Unknown nand command suffix '%s'.\n", s);
return 1;
return 0;
}
- if (strcmp(cmd, "unlock") == 0) {
+ if (strncmp(cmd, "unlock", 5) == 0) {
+ int allexcept = 0;
+
+ s = strchr(cmd, '.');
+
+ if (s && !strcmp(s, ".allexcept"))
+ allexcept = 1;
+
if (arg_off_size(argc - 2, argv + 2, &dev, &off, &size) < 0)
return 1;
- if (!nand_unlock(&nand_info[dev], off, size)) {
+ if (!nand_unlock(&nand_info[dev], off, size, allexcept)) {
puts("NAND flash successfully unlocked\n");
} else {
puts("Error unlocking NAND flash, "
return CMD_RET_USAGE;
}
-U_BOOT_CMD(
- nand, CONFIG_SYS_MAXARGS, 1, do_nand,
- "NAND sub-system",
+#ifdef CONFIG_SYS_LONGHELP
+static char nand_help_text[] =
"info - show available NAND devices\n"
"nand device [dev] - show or set current device\n"
"nand read - addr off|partition size\n"
"nand write - addr off|partition size\n"
" read/write 'size' bytes starting at offset 'off'\n"
" to/from memory address 'addr', skipping bad blocks.\n"
- "nand read.raw - addr off|partition\n"
- "nand write.raw - addr off|partition\n"
- " Use read.raw/write.raw to avoid ECC and access the page as-is.\n"
+ "nand read.raw - addr off|partition [count]\n"
+ "nand write.raw - addr off|partition [count]\n"
+ " Use read.raw/write.raw to avoid ECC and access the flash as-is.\n"
#ifdef CONFIG_CMD_NAND_TRIMFFS
"nand write.trimffs - addr off|partition size\n"
" write 'size' bytes starting at offset 'off' from memory address\n"
"\n"
"nand lock [tight] [status]\n"
" bring nand to lock state or display locked pages\n"
- "nand unlock [offset] [size] - unlock section"
+ "nand unlock[.allexcept] [offset] [size] - unlock section"
#endif
#ifdef CONFIG_ENV_OFFSET_OOB
"\n"
"nand env.oob set off|partition - set enviromnent offset\n"
"nand env.oob get - get environment offset"
#endif
+ "";
+#endif
+
+U_BOOT_CMD(
+ nand, CONFIG_SYS_MAXARGS, 1, do_nand,
+ "NAND sub-system", nand_help_text
);
static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand,
return bootm_maybe_autostart(cmdtp, cmd);
}
-int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
+static int do_nandboot(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
{
char *boot_device = NULL;
int idx;
projects / J-u-boot.git / blobdiff