#
-# (C) Copyright 2000-2005
+# (C) Copyright 2000-2006
#
# See file CREDITS for list of people who contributed to this
# MA 02111-1307 USA
#
+VERSION = 1
+PATCHLEVEL = 1
+SUBLEVEL = 4
+EXTRAVERSION =
+U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
+VERSION_FILE = include/version_autogenerated.h
+
HOSTARCH := $(shell uname -m | \
sed -e s/i.86/i386/ \
-e s/sun4u/sparc64/ \
# load ARCH, BOARD, and CPU configuration
include include/config.mk
export ARCH CPU BOARD VENDOR SOC
-# load other configuration
-include $(TOPDIR)/config.mk
-
ifndef CROSS_COMPILE
ifeq ($(HOSTARCH),ppc)
CROSS_COMPILE =
ifeq ($(ARCH),microblaze)
CROSS_COMPILE = mb-
endif
+ifeq ($(ARCH),blackfin)
+CROSS_COMPILE = bfin-elf-
+endif
endif
endif
export CROSS_COMPILE
+# load other configuration
+include $(TOPDIR)/config.mk
+
+
#########################################################################
# U-Boot objects....order is important (i.e. start must be first)
ifeq ($(CPU),mpc85xx)
OBJS += cpu/$(CPU)/resetvec.o
endif
+ifeq ($(CPU),mpc86xx)
+OBJS += cpu/$(CPU)/resetvec.o
+endif
+ifeq ($(CPU),bf533)
+OBJS += cpu/$(CPU)/start1.o cpu/$(CPU)/interrupt.o cpu/$(CPU)/cache.o
+OBJS += cpu/$(CPU)/cplbhdlr.o cpu/$(CPU)/cplbmgr.o cpu/$(CPU)/flush.o
+endif
LIBS = lib_generic/libgeneric.a
LIBS += board/$(BOARDDIR)/lib$(BOARD).a
LIBS += rtc/librtc.a
LIBS += dtt/libdtt.a
LIBS += drivers/libdrivers.a
+LIBS += drivers/nand/libnand.a
+LIBS += drivers/nand_legacy/libnand_legacy.a
LIBS += drivers/sk98lin/libsk98lin.a
LIBS += post/libpost.a post/cpu/libcpu.a
LIBS += common/libcommon.a
+LIBS += $(BOARDLIBS)
.PHONY : $(LIBS)
# Add GCC lib
u-boot.img: u-boot.bin
./tools/mkimage -A $(ARCH) -T firmware -C none \
-a $(TEXT_BASE) -e 0 \
- -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' include/version.h | \
+ -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \
-d $< $@
u-boot.dis: u-boot
$(OBJDUMP) -d $< > $@
-u-boot: depend $(SUBDIRS) $(OBJS) $(LIBS) $(LDSCRIPT)
+u-boot: depend version $(SUBDIRS) $(OBJS) $(LIBS) $(LDSCRIPT)
UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) |sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
$(LD) $(LDFLAGS) $$UNDEF_SYM $(OBJS) \
--start-group $(LIBS) --end-group $(PLATFORM_LIBS) \
$(SUBDIRS):
$(MAKE) -C $@ all
+version:
+ @echo -n "#define U_BOOT_VERSION \"U-Boot " > $(VERSION_FILE); \
+ echo -n "$(U_BOOT_VERSION)" >> $(VERSION_FILE); \
+ echo -n $(shell $(CONFIG_SHELL) $(TOPDIR)/tools/setlocalversion \
+ $(TOPDIR)) >> $(VERSION_FILE); \
+ echo "\"" >> $(VERSION_FILE)
+
gdbtools:
$(MAKE) -C tools/gdb || exit 1
aev_config: unconfig
@./mkconfig -a aev ppc mpc5xxx tqm5200
+BC3450_config: unconfig
+ @./mkconfig -a BC3450 ppc mpc5xxx bc3450
+
cpci5200_config: unconfig
@./mkconfig -a cpci5200 ppc mpc5xxx cpci5200 esd
}
@./mkconfig -a IceCube ppc mpc5xxx icecube
-inka4x0_config: unconfig
+inka4x0_config: unconfig
@./mkconfig inka4x0 ppc mpc5xxx inka4x0
+lite5200b_config \
+lite5200b_LOWBOOT_config: unconfig
+ @ >include/config.h
+ @ echo "#define CONFIG_MPC5200_DDR" >>include/config.h
+ @ echo "... DDR memory revision"
+ @ echo "#define CONFIG_MPC5200" >>include/config.h
+ @ echo "#define CONFIG_LITE5200B" >>include/config.h
+ @[ -z "$(findstring LOWBOOT_,$@)" ] || \
+ { echo "TEXT_BASE = 0xFF000000" >board/icecube/config.tmp ; \
+ echo "... with LOWBOOT configuration" ; \
+ }
+ @ echo "... with MPC5200B processor"
+ @./mkconfig -a IceCube ppc mpc5xxx icecube
+
+mcc200_config \
+mcc200_lowboot_config: unconfig
+ @ >include/config.h
+ @[ -z "$(findstring lowboot_,$@)" ] || \
+ { echo "TEXT_BASE = 0xFC000000" >board/mcc200/config.tmp ; \
+ echo "... with lowboot configuration" ; \
+ }
+ @./mkconfig mcc200 ppc mpc5xxx mcc200
+
o2dnt_config:
- @./mkconfig -a o2dnt ppc mpc5xxx o2dnt
+ @./mkconfig o2dnt ppc mpc5xxx o2dnt
pf5200_config: unconfig
- @./mkconfig -a pf5200 ppc mpc5xxx pf5200 esd
+ @./mkconfig pf5200 ppc mpc5xxx pf5200 esd
PM520_config \
PM520_DDR_config \
}
@./mkconfig -a PM520 ppc mpc5xxx pm520
+smmaco4_config: unconfig
+ @./mkconfig -a smmaco4 ppc mpc5xxx tqm5200
+
+spieval_config: unconfig
+ echo "#define CONFIG_CS_AUTOCONF">>include/config.h
+ echo "... with automatic CS configuration"
+ @./mkconfig -a spieval ppc mpc5xxx tqm5200
+
MINI5200_config \
EVAL5200_config \
TOP5200_config: unconfig
}
@./mkconfig -a TQM5200 ppc mpc5xxx tqm5200
-spieval_config: unconfig
- echo "#define CONFIG_CS_AUTOCONF">>include/config.h
- echo "... with automatic CS configuration"
- @./mkconfig -a spieval ppc mpc5xxx tqm5200
-
#########################################################################
## MPC8xx Systems
#########################################################################
ELPT860_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx elpt860 LEOX
+EP88x_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc8xx ep88x
+
ESTEEM192E_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx esteem192e
}
@./mkconfig -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2
-NC650_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx nc650
+NC650_Rev1_config \
+NC650_Rev2_config \
+CP850_config: unconfig
+ @ >include/config.h
+ @[ -z "$(findstring CP850,$@)" ] || \
+ { echo "#define CONFIG_CP850 1" >>include/config.h ; \
+ echo "#define CONFIG_IDS852_REV2 1" >>include/config.h ; \
+ }
+ @[ -z "$(findstring Rev1,$@)" ] || \
+ { echo "#define CONFIG_IDS852_REV1 1" >>include/config.h ; \
+ }
+ @[ -z "$(findstring Rev2,$@)" ] || \
+ { echo "#define CONFIG_IDS852_REV2 1" >>include/config.h ; \
+ }
+ @./mkconfig -a NC650 ppc mpc8xx nc650
NX823_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx nx823
ADCIOP_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx adciop esd
+AP1000_config:unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx ap1000 amirix
+
APC405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx apc405 esd
KAREF_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx karef sandburst
+luan_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx luan amcc
+
METROBOX_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx metrobox sandburst
ORSG_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx ocrtc esd
+p3p440_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx p3p440 prodrive
+
PCI405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx pci405 esd
VOM405_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx vom405 esd
+CMS700_config: unconfig
+ @./mkconfig $(@:_config=) ppc ppc4xx cms700 esd
+
W7OLMC_config \
W7OLMG_config: unconfig
@./mkconfig $(@:_config=) ppc ppc4xx w7o
A3000_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x a3000
+barco_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc824x barco
+
BMW_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x bmw
utx8245_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x utx8245
-cobra5272_config : unconfig
- @./mkconfig $(@:_config=) m68k mcf52x2 cobra5272
-
#########################################################################
## MPC8260 Systems
#########################################################################
PM828_PCI_config \
PM828_ROMBOOT_config \
PM828_ROMBOOT_PCI_config: unconfig
- @if [ -z "$(findstring _PCI_,$@)" ] ; then \
+ @if [ "$(findstring _PCI_,$@)" ] ; then \
echo "#define CONFIG_PCI" >>include/config.h ; \
echo "... with PCI enabled" ; \
else \
TQM8260_AF_config \
TQM8260_AG_config \
TQM8260_AH_config \
+TQM8260_AI_config \
TQM8265_AA_config: unconfig
@case "$@" in \
- TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no; BMODE=8260;; \
- TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no; BMODE=8260;; \
- TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \
- TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \
- TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \
- TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no; BMODE=8260;; \
- TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \
- TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=8260;; \
- TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;; \
- TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no; BMODE=60x;; \
+ TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no; BMODE=8260;; \
+ TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no; BMODE=8260;; \
+ TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \
+ TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \
+ TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \
+ TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no; BMODE=8260;; \
+ TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \
+ TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=8260;; \
+ TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;; \
+ TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \
+ TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no; BMODE=60x;; \
esac; \
>include/config.h ; \
if [ "$${CTYPE}" != "MPC8260" ] ; then \
## Coldfire
#########################################################################
+cobra5272_config : unconfig
+ @./mkconfig $(@:_config=) m68k mcf52x2 cobra5272
+
M5272C3_config : unconfig
@./mkconfig $(@:_config=) m68k mcf52x2 m5272c3
TASREG_config : unconfig
@./mkconfig $(@:_config=) m68k mcf52x2 tasreg esd
+r5200_config : unconfig
+ @./mkconfig $(@:_config=) m68k mcf52x2 r5200
+
+M5271EVB_config : unconfig
+ @./mkconfig $(@:_config=) m68k mcf52x2 m5271evb
+
#########################################################################
## MPC83xx Systems
#########################################################################
MPC8349ADS_config: unconfig
@./mkconfig $(@:_config=) ppc mpc83xx mpc8349ads
+TQM834x_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc83xx tqm834x
+
+MPC8349EMDS_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc83xx mpc8349emds
+
#########################################################################
## MPC85xx Systems
#########################################################################
stxgp3_config: unconfig
@./mkconfig $(@:_config=) ppc mpc85xx stxgp3
-TQM8540_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc85xx tqm8540
+TQM8540_config \
+TQM8541_config \
+TQM8555_config \
+TQM8560_config: unconfig
+ @CTYPE=$(subst TQM,,$(@:_config=)); \
+ >include/config.h ; \
+ echo "... TQM"$${CTYPE}; \
+ echo "#define CONFIG_MPC$${CTYPE}">>include/config.h; \
+ echo "#define CONFIG_TQM$${CTYPE}">>include/config.h; \
+ echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>include/config.h; \
+ echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>include/config.h; \
+ echo "#define CFG_BOOTFILE \"bootfile=/tftpboot/tqm$${CTYPE}/uImage\0\"">>include/config.h
+ @./mkconfig -a TQM85xx ppc mpc85xx tqm85xx
+
+#########################################################################
+## MPC86xx Systems
+#########################################################################
+
+MPC8641HPCN_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc86xx mpc8641hpcn
-TQM8560_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc85xx tqm8560
#########################################################################
## 74xx/7xx Systems
cmc_pu2_config : unconfig
@./mkconfig $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
-########################################################################
-## ARM Integrator boards
-## There are two variants /AP && /CP
-## - many different core modules (CMs) can be used
-## - some share characteristics
-## Those without specific cpu support can still use U-Boot
-## provided the ARM boot monitor (or similar) runs before U-Boot
-## to set up the platform e.g. map writeable memory to 0x00000000
-## setup MMU, setup caches etc.
-## Ported cores are:-
-## ARM926EJ-S
-## ARM946E-S
-##
-########################################################################
-xtract_int_board = $(subst _$(subst integrator$1_,,$(subst _config,,$2)),,$(subst _config,,$2))
-xtract_int_cm = $(subst integrator$1_,,$(subst _config,,$2))
-#########################################################################
-## Integrator/AP
-#########################################################################
-integratorap_config : unconfig
- @echo -n "/* Integrator configuration implied " > tmp.fil; \
- echo " by Makefile target */" >> tmp.fil; \
- echo >> tmp.fil
- @echo -n "#define CONFIG_INTEGRATOR 1" >> tmp.fil; \
- echo " /* Integrator board */" >> tmp.fil; \
- echo -n "#define CONFIG_ARCH_INTEGRATOR" >> tmp.fil; \
- echo " 1 /* Integrator/AP */" >> tmp.fil; \
- echo "/* Core module not defined */" >> tmp.fil; \
- echo -n "#define CONFIG_ARM_INTCM 1" >> tmp.fil; \
- echo -n " /* Integrator core module " >> tmp.fil; \
- echo "with unknown core */" >> tmp.fil; \
- cpu=arm_intcm; \
- mv tmp.fil ./include/config.h; \
- ubootlds=board/integratorap/u-boot.lds; \
- sed -e 's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \
- $$ubootlds > $$ubootlds.tmp; \
- mv -f $$ubootlds.tmp $$ubootlds; \
- ./mkconfig -a integratorap arm arm_intcm integratorap;
-
-integratorap_CM720T_config integratorap_CM7TDMI_config \
-integratorap_CM920T_config integratorap_CM920T_ETM_config \
-integratorap_CM922T_XA10_config integratorap_CM926EJ_S_config \
-integratorap_CM940T_config integratorap_CM946E_S_config \
-integratorap_CM966E_S_config integratorap_CM10200E_config \
-integratorap_CM10220E_config integratorap_CM1026EJ_S_config \
-integratorap_CM1136JF_S_config : unconfig
- @echo -n "/* Integrator configuration implied " > tmp.fil; \
- echo " by Makefile target */" >> tmp.fil; \
- echo >> tmp.fil
- @echo -n "#define CONFIG_INTEGRATOR 1" >> tmp.fil; \
- echo " /* Integrator board */" >> tmp.fil; \
- echo -n "#define CONFIG_ARCH_INTEGRATOR" >> tmp.fil; \
- echo " 1 /* Integrator/AP */" >> tmp.fil; \
- cm=$(call xtract_int_cm,ap,$@); \
- echo -n "#define CONFIG_$$cm " >> tmp.fil; \
- echo " /* core module */" >> tmp.fil; \
- case $$cm in \
- CM920T) \
- echo -n "#define CONFIG_ARM920" >> tmp.fil; \
- echo -n "T 1 /* CPU" >> tmp.fil; \
- echo -n " core is ARM920T" >> tmp.fil; \
- echo " */" >> tmp.fil; \
- cpu=arm920t;; \
- CM926EJ_S) echo -n "#define CONFIG_ARM926" >> tmp.fil; \
- echo -n "EJ_S 1 /* CPU" >> tmp.fil; \
- echo -n " core is ARM926EJ-S" >> tmp.fil; \
- echo " */" >> tmp.fil; \
- cpu=arm926ejs;; \
- CM946E_S) echo -n "#define CONFIG_ARM946" >> tmp.fil; \
- echo -n "E_S 1 /* CPU" >> tmp.fil; \
- echo -n " core is ARM946E-S" >> tmp.fil; \
- echo " */" >> tmp.fil; \
- cpu=arm946es;; \
- *) echo -n "#define CONFIG_ARM_IN" >> tmp.fil; \
- echo -n "TCM 1 /* Int" >> tmp.fil; \
- echo -n "egrator core module w" >> tmp.fil; \
- echo -n "ith unported core" >> tmp.fil; \
- echo " */" >> tmp.fil; \
- cpu=arm_intcm;; \
- esac; \
- mv tmp.fil ./include/config.h; \
- ubootlds=board/$(call xtract_int_board,ap,$@)/u-boot.lds; \
- sed -e 's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \
- $$ubootlds > $$ubootlds.tmp; \
- mv -f $$ubootlds.tmp $$ubootlds; \
- ./mkconfig -a $(call xtract_int_board,ap,$@) arm $$cpu \
- $(call xtract_int_board,ap,$@);
+csb637_config : unconfig
+ @./mkconfig $(@:_config=) arm arm920t csb637 NULL at91rm9200
-#########################################################################
-## Integrator/CP
-#########################################################################
-integratorcp_config : unconfig
- @echo -n "/* Integrator configuration implied " > tmp.fil; \
- echo " by Makefile target */" >> tmp.fil; \
- echo >> tmp.fil
- @echo -n "#define CONFIG_INTEGRATOR 1" >> tmp.fil; \
- echo " /* Integrator board */" >> tmp.fil; \
- echo -n "#define CONFIG_ARCH_CINTEGRATOR" >> tmp.fil; \
- echo " 1 /* Integrator/CP */" >> tmp.fil; \
- echo "/* Core module not defined */" >> tmp.fil; \
- echo -n "#define CONFIG_ARM_INTCM 1" >> tmp.fil; \
- echo -n " /* Integrator core module " >> tmp.fil; \
- echo "with unknown core */" >> tmp.fil; \
- cpu=arm_intcm; \
- echo -n "#undef CONFIG_CM_MULTIPLE_SSRAM" >> tmp.fil; \
- echo -n " /* CM may not have " >> tmp.fil; \
- echo "multiple SSRAM mapping */" >> tmp.fil; \
- echo -n "#undef CONFIG_CM_SPD_DETECT " >> tmp.fil; \
- echo -n " /* CM may not support SPD " >> tmp.fil; \
- echo "query */" >> tmp.fil; \
- echo -n "#undef CONFIG_CM_REMAP " >> tmp.fil; \
- echo -n " /* CM may not support " >> tmp.fil; \
- echo "remapping */" >> tmp.fil; \
- echo -n "#undef CONFIG_CM_INIT " >> tmp.fil; \
- echo -n " /* CM may not have " >> tmp.fil; \
- echo "initialization reg */" >> tmp.fil; \
- echo -n "#undef CONFIG_CM_TCRAM " >> tmp.fil; \
- echo -n " /* CM may not have TCRAM */" >> tmp.fil; \
- mv tmp.fil ./include/config.h; \
- ubootlds=board/integratorcp/u-boot.lds; \
- sed -e 's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \
- $$ubootlds > $$ubootlds.tmp; \
- mv -f $$ubootlds.tmp $$ubootlds; \
- ./mkconfig -a integratorcp arm arm_intcm integratorcp;
-
-integratorcp_CM920T_config integratorcp_CM920T_ETM_config \
-integratorcp_CM922T_XA10_config integratorcp_CM926EJ_S_config \
-integratorcp_CM940T_config integratorcp_CM946E_S_config \
-integratorcp_CM966E_S_config integratorcp_CM10200E_config \
-integratorcp_CM10220E_config integratorcp_CM1026EJ_S_config \
-integratorcp_CM1136JF_S_config : unconfig
- @echo -n "/* Integrator configuration implied " > tmp.fil; \
- echo " by Makefile target */" >> tmp.fil; \
- echo >> tmp.fil
- @echo -n "#define CONFIG_INTEGRATOR 1" >> tmp.fil; \
- echo " /* Integrator board */" >> tmp.fil; \
- echo -n "#define CONFIG_ARCH_CINTEGRATOR" >> tmp.fil; \
- echo " 1 /* Integrator/CP */" >> tmp.fil; \
- cm=$(call xtract_int_cm,cp,$@); \
- echo -n "#define CONFIG_$$cm " >> tmp.fil; \
- echo " /* core module */" >> tmp.fil; \
- echo "/* $$cm core module */" >> tmp.fil; \
- case $$cm in \
- CM920T) echo -n "#define CONFIG_ARM920" >> tmp.fil; \
- echo -n "T 1 /* CPU" >> tmp.fil; \
- echo -n " core is ARM920T" >> tmp.fil; \
- echo " */" >> tmp.fil; \
- cpu=arm920t;; \
- CM946E_S) echo -n "#define CONFIG_ARM946" >> tmp.fil; \
- echo -n "E_S 1 /* CPU" >> tmp.fil; \
- echo -n " core is ARM946E-S" >> tmp.fil; \
- echo " */" >> tmp.fil; \
- cpu=arm946es;; \
- CM926EJ_S) echo -n "#define CONFIG_ARM926" >> tmp.fil; \
- echo -n "EJ_S 1 /* CPU" >> tmp.fil; \
- echo -n " core is ARM926EJ-S" >> tmp.fil; \
- echo " */" >> tmp.fil; \
- cpu=arm926ejs;; \
- *) echo -n "#define CONFIG_ARM_IN" >> tmp.fil; \
- echo -n "TCM 1 /* Int" >> tmp.fil; \
- echo -n "egrator core module w" >> tmp.fil; \
- echo -n "ith unported core" >> tmp.fil; \
- echo " */" >> tmp.fil; \
- cpu=arm_intcm;; \
- esac; \
- mv tmp.fil ./include/config.h; \
- ubootlds=board/$(call xtract_int_board,cp,$@)/u-boot.lds; \
- sed -e 's/cpu\/.*\/st/cpu\/'$$cpu'\/st/' \
- $$ubootlds > $$ubootlds.tmp; \
- mv -f $$ubootlds.tmp $$ubootlds; \
- ./mkconfig -a $(call xtract_int_board,cp,$@) arm $$cpu \
- $(call xtract_int_board,cp,$@);
+mp2usb_config : unconfig
+ @./mkconfig $(@:_config=) arm arm920t mp2usb NULL at91rm9200
+
+
+########################################################################
+## ARM Integrator boards - see doc/README-integrator for more info.
+integratorap_config \
+ap_config \
+ap966_config \
+ap922_config \
+ap922_XA10_config \
+ap7_config \
+ap720t_config \
+ap920t_config \
+ap926ejs_config \
+ap946es_config: unconfig
+ @board/integratorap/split_by_variant.sh $@
+
+integratorcp_config \
+cp_config \
+cp920t_config \
+cp926ejs_config \
+cp946es_config \
+cp1136_config \
+cp966_config \
+cp922_config \
+cp922_XA10_config \
+cp1026_config: unconfig
+ @board/integratorcp/split_by_variant.sh $@
+
+kb9202_config : unconfig
+ @./mkconfig $(@:_config=) arm arm920t kb9202 NULL at91rm9200
lpd7a400_config \
lpd7a404_config: unconfig
mx1fs2_config : unconfig
@./mkconfig $(@:_config=) arm arm920t mx1fs2 NULL imx
+netstar_32_config \
+netstar_config: unconfig
+ @if [ "$(findstring _32_,$@)" ] ; then \
+ echo "... 32MB SDRAM" ; \
+ echo "#define PHYS_SDRAM_1_SIZE SZ_32M" >>include/config.h ; \
+ else \
+ echo "... 64MB SDRAM" ; \
+ echo "#define PHYS_SDRAM_1_SIZE SZ_64M" >>include/config.h ; \
+ fi
+ @./mkconfig -a netstar arm arm925t netstar
+
omap1510inn_config : unconfig
@./mkconfig $(@:_config=) arm arm925t omap1510inn
omap5912osk_config : unconfig
- @./mkconfig $(@:_config=) arm arm926ejs omap5912osk
+ @./mkconfig $(@:_config=) arm arm926ejs omap5912osk NULL omap
omap1610inn_config \
omap1610inn_cs0boot_config \
echo "#define CONFIG_CS3_BOOT" >> ./include/config.h ; \
echo "... configured for CS3 boot"; \
fi;
- @./mkconfig -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn
+ @./mkconfig -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap
omap730p2_config \
omap730p2_cs0boot_config \
echo "#define CONFIG_CS3_BOOT" >> ./include/config.h ; \
echo "... configured for CS3 boot"; \
fi;
- @./mkconfig -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2
+ @./mkconfig -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 NULL omap
scb9328_config : unconfig
@./mkconfig $(@:_config=) arm arm920t scb9328 NULL imx
VCMA9_config : unconfig
@./mkconfig $(@:_config=) arm arm920t vcma9 mpl s3c24x0
-versatile_config : unconfig
- @./mkconfig $(@:_config=) arm arm926ejs versatile
+#========================================================================
+# ARM supplied Versatile development boards
+#========================================================================
+versatile_config \
+versatileab_config \
+versatilepb_config : unconfig
+ @board/versatile/split_by_variant.sh $@
voiceblue_smallflash_config \
voiceblue_config: unconfig
## ARM720T Systems
#########################################################################
+armadillo_config: unconfig
+ @./mkconfig $(@:_config=) arm arm720t armadillo
+
ep7312_config : unconfig
@./mkconfig $(@:_config=) arm arm720t ep7312
csb226_config : unconfig
@./mkconfig $(@:_config=) arm pxa csb226
+delta_config :
+ @./mkconfig $(@:_config=) arm pxa delta
+
innokom_config : unconfig
@./mkconfig $(@:_config=) arm pxa innokom
logodl_config : unconfig
@./mkconfig $(@:_config=) arm pxa logodl
+pxa255_idp_config: unconfig
+ @./mkconfig $(@:_config=) arm pxa pxa255_idp
+
wepep250_config : unconfig
@./mkconfig $(@:_config=) arm pxa wepep250
xsengine_config : unconfig
@./mkconfig $(@:_config=) arm pxa xsengine
+zylonite_config :
+ @./mkconfig $(@:_config=) arm pxa zylonite
+
#########################################################################
## ARM1136 Systems
#########################################################################
@echo "#define CONFIG_SUZAKU 1" >> include/config.h
@./mkconfig -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
+#########################################################################
+## Blackfin
+#########################################################################
+ezkit533_config : unconfig
+ @./mkconfig $(@:_config=) blackfin bf533 ezkit533
+
+stamp_config : unconfig
+ @./mkconfig $(@:_config=) blackfin bf533 stamp
+
+dspstamp_config : unconfig
+ @./mkconfig $(@:_config=) blackfin bf533 dsp_stamp
+
+#########################################################################
#########################################################################
#########################################################################
rm -f examples/hello_world examples/timer \
examples/eepro100_eeprom examples/sched \
examples/mem_to_mem_idma2intr examples/82559_eeprom \
+ examples/smc91111_eeprom \
examples/test_burst
rm -f tools/img2srec tools/mkimage tools/envcrc tools/gen_eth_addr
rm -f tools/mpc86x_clk tools/ncb
rm -f tools/gdb/astest tools/gdb/gdbcont tools/gdb/gdbsend
rm -f tools/env/fw_printenv tools/env/fw_setenv
rm -f board/cray/L1/bootscript.c board/cray/L1/bootscript.image
+ rm -f board/netstar/eeprom board/netstar/crcek
+ rm -f board/netstar/*.srec board/netstar/*.bin
rm -f board/trab/trab_fkt board/voiceblue/eeprom
+ rm -f board/integratorap/u-boot.lds board/integratorcp/u-boot.lds
clobber: clean
find . -type f \( -name .depend \
-o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \
-print0 \
| xargs -0 rm -f
- rm -f $(OBJS) *.bak tags TAGS
+ rm -f $(OBJS) *.bak tags TAGS include/version_autogenerated.h
rm -fr *.*~
rm -f u-boot u-boot.map u-boot.hex $(ALL)
rm -f tools/crc32.c tools/environment.c tools/env/crc32.c
projects / J-u-boot.git / blobdiff