#include <part.h>
#include <usb.h>
-#undef USB_STOR_DEBUG
#undef BBB_COMDAT_TRACE
#undef BBB_XPORT_TRACE
-#ifdef USB_STOR_DEBUG
-#define USB_STOR_PRINTF(fmt, args...) printf(fmt , ##args)
-#else
-#define USB_STOR_PRINTF(fmt, args...)
-#endif
-
#include <scsi.h>
/* direction table -- this indicates the direction of the data
* transfer for each command code -- a 1 indicates input
*/
-unsigned char us_direction[256/8] = {
+static const unsigned char us_direction[256/8] = {
0x28, 0x81, 0x14, 0x14, 0x20, 0x01, 0x90, 0x77,
0x0C, 0x20, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01,
};
#define US_DIRECTION(x) ((us_direction[x>>3] >> (x & 7)) & 1)
-static unsigned char usb_stor_buf[512];
-static ccb usb_ccb;
+static ccb usb_ccb __attribute__((aligned(ARCH_DMA_MINALIGN)));
/*
* CBI style
struct usb_device *pusb_dev; /* this usb_device */
unsigned int flags; /* from filter initially */
+# define USB_READY (1 << 0)
unsigned char ifnum; /* interface number */
unsigned char ep_in; /* in endpoint */
unsigned char ep_out; /* out ....... */
trans_cmnd transport; /* transport routine */
};
+#ifdef CONFIG_USB_EHCI
+/*
+ * The U-Boot EHCI driver can handle any transfer length as long as there is
+ * enough free heap space left, but the SCSI READ(10) and WRITE(10) commands are
+ * limited to 65535 blocks.
+ */
+#define USB_MAX_XFER_BLK 65535
+#else
+#define USB_MAX_XFER_BLK 20
+#endif
+
static struct us_data usb_stor[USB_MAX_STOR_DEV];
int usb_storage_probe(struct usb_device *dev, unsigned int ifnum,
struct us_data *ss);
unsigned long usb_stor_read(int device, unsigned long blknr,
- unsigned long blkcnt, void *buffer);
+ lbaint_t blkcnt, void *buffer);
unsigned long usb_stor_write(int device, unsigned long blknr,
- unsigned long blkcnt, const void *buffer);
+ lbaint_t blkcnt, const void *buffer);
struct usb_device * usb_get_dev_index(int index);
void uhci_show_temp_int_td(void);
+#ifdef CONFIG_PARTITIONS
block_dev_desc_t *usb_stor_get_dev(int index)
{
return (index < usb_max_devs) ? &usb_dev_desc[index] : NULL;
}
+#endif
-
-void usb_show_progress(void)
+static void usb_show_progress(void)
{
- printf(".");
+ debug(".");
}
/*******************************************************************************
return 1;
}
+static unsigned int usb_get_max_lun(struct us_data *us)
+{
+ int len;
+ ALLOC_CACHE_ALIGN_BUFFER(unsigned char, result, 1);
+ len = usb_control_msg(us->pusb_dev,
+ usb_rcvctrlpipe(us->pusb_dev, 0),
+ US_BBB_GET_MAX_LUN,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN,
+ 0, us->ifnum,
+ result, sizeof(char),
+ USB_CNTL_TIMEOUT * 5);
+ debug("Get Max LUN -> len = %i, result = %i\n", len, (int) *result);
+ return (len > 0) ? *result : 0;
+}
+
/*******************************************************************************
* scan the usb and reports device info
* to the user if mode = 1
unsigned char i;
struct usb_device *dev;
- /* GJ */
- memset(usb_stor_buf, 0, sizeof(usb_stor_buf));
-
if (mode == 1)
- printf(" scanning bus for storage devices... ");
+ printf(" scanning usb for storage devices... ");
usb_disable_asynch(1); /* asynch transfer not allowed */
for (i = 0; i < USB_MAX_STOR_DEV; i++) {
memset(&usb_dev_desc[i], 0, sizeof(block_dev_desc_t));
- usb_dev_desc[i].target = 0xff;
usb_dev_desc[i].if_type = IF_TYPE_USB;
usb_dev_desc[i].dev = i;
usb_dev_desc[i].part_type = PART_TYPE_UNKNOWN;
+ usb_dev_desc[i].target = 0xff;
+ usb_dev_desc[i].type = DEV_TYPE_UNKNOWN;
usb_dev_desc[i].block_read = usb_stor_read;
usb_dev_desc[i].block_write = usb_stor_write;
}
usb_max_devs = 0;
for (i = 0; i < USB_MAX_DEVICE; i++) {
dev = usb_get_dev_index(i); /* get device */
- USB_STOR_PRINTF("i=%d\n", i);
+ debug("i=%d\n", i);
if (dev == NULL)
- break; /* no more devices avaiable */
+ break; /* no more devices available */
if (usb_storage_probe(dev, 0, &usb_stor[usb_max_devs])) {
- /* ok, it is a storage devices
- * get info and fill it in
+ /* OK, it's a storage device. Iterate over its LUNs
+ * and populate `usb_dev_desc'.
*/
- if (usb_stor_get_info(dev, &usb_stor[usb_max_devs],
- &usb_dev_desc[usb_max_devs]) == 1)
- usb_max_devs++;
+ int lun, max_lun, start = usb_max_devs;
+
+ max_lun = usb_get_max_lun(&usb_stor[usb_max_devs]);
+ for (lun = 0;
+ lun <= max_lun && usb_max_devs < USB_MAX_STOR_DEV;
+ lun++) {
+ usb_dev_desc[usb_max_devs].lun = lun;
+ if (usb_stor_get_info(dev, &usb_stor[start],
+ &usb_dev_desc[usb_max_devs]) == 1) {
+ usb_max_devs++;
+ }
+ }
}
/* if storage device */
if (usb_max_devs == USB_MAX_STOR_DEV) {
}
-#ifdef USB_STOR_DEBUG
+#ifdef DEBUG
static void usb_show_srb(ccb *pccb)
{
/* set up the transfer loop */
do {
/* transfer the data */
- USB_STOR_PRINTF("Bulk xfer 0x%x(%d) try #%d\n",
- (unsigned int)buf, this_xfer, 11 - maxtry);
+ debug("Bulk xfer 0x%x(%d) try #%d\n",
+ (unsigned int)buf, this_xfer, 11 - maxtry);
result = usb_bulk_msg(us->pusb_dev, pipe, buf,
this_xfer, &partial,
USB_CNTL_TIMEOUT * 5);
- USB_STOR_PRINTF("bulk_msg returned %d xferred %d/%d\n",
- result, partial, this_xfer);
+ debug("bulk_msg returned %d xferred %d/%d\n",
+ result, partial, this_xfer);
if (us->pusb_dev->status != 0) {
/* if we stall, we need to clear it before
* we go on
*/
-#ifdef USB_STOR_DEBUG
+#ifdef DEBUG
display_int_status(us->pusb_dev->status);
#endif
if (us->pusb_dev->status & USB_ST_STALLED) {
- USB_STOR_PRINTF("stalled ->clearing endpoint halt for pipe 0x%x\n", pipe);
+ debug("stalled ->clearing endpoint" \
+ "halt for pipe 0x%x\n", pipe);
stat = us->pusb_dev->status;
usb_clear_halt(us->pusb_dev, pipe);
us->pusb_dev->status = stat;
if (this_xfer == partial) {
- USB_STOR_PRINTF("bulk transferred with error %X, but data ok\n", us->pusb_dev->status);
+ debug("bulk transferred" \
+ "with error %lX," \
+ " but data ok\n",
+ us->pusb_dev->status);
return 0;
}
else
return result;
}
if (us->pusb_dev->status & USB_ST_NAK_REC) {
- USB_STOR_PRINTF("Device NAKed bulk_msg\n");
+ debug("Device NAKed bulk_msg\n");
return result;
}
- USB_STOR_PRINTF("bulk transferred with error");
+ debug("bulk transferred with error");
if (this_xfer == partial) {
- USB_STOR_PRINTF(" %d, but data ok\n",
- us->pusb_dev->status);
+ debug(" %ld, but data ok\n",
+ us->pusb_dev->status);
return 0;
}
/* if our try counter reaches 0, bail out */
- USB_STOR_PRINTF(" %d, data %d\n",
- us->pusb_dev->status, partial);
+ debug(" %ld, data %d\n",
+ us->pusb_dev->status, partial);
if (!maxtry--)
return result;
}
*
* This comment stolen from FreeBSD's /sys/dev/usb/umass.c.
*/
- USB_STOR_PRINTF("BBB_reset\n");
+ debug("BBB_reset\n");
result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev, 0),
US_BBB_RESET,
USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- 0, us->ifnum, 0, 0, USB_CNTL_TIMEOUT * 5);
+ 0, us->ifnum, NULL, 0, USB_CNTL_TIMEOUT * 5);
if ((result < 0) && (us->pusb_dev->status & USB_ST_STALLED)) {
- USB_STOR_PRINTF("RESET:stall\n");
+ debug("RESET:stall\n");
return -1;
}
/* long wait for reset */
- wait_ms(150);
- USB_STOR_PRINTF("BBB_reset result %d: status %X reset\n", result,
- us->pusb_dev->status);
+ mdelay(150);
+ debug("BBB_reset result %d: status %lX reset\n",
+ result, us->pusb_dev->status);
pipe = usb_rcvbulkpipe(us->pusb_dev, us->ep_in);
result = usb_clear_halt(us->pusb_dev, pipe);
/* long wait for reset */
- wait_ms(150);
- USB_STOR_PRINTF("BBB_reset result %d: status %X clearing IN endpoint\n",
- result, us->pusb_dev->status);
+ mdelay(150);
+ debug("BBB_reset result %d: status %lX clearing IN endpoint\n",
+ result, us->pusb_dev->status);
/* long wait for reset */
pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
result = usb_clear_halt(us->pusb_dev, pipe);
- wait_ms(150);
- USB_STOR_PRINTF("BBB_reset result %d: status %X"
- " clearing OUT endpoint\n", result,
- us->pusb_dev->status);
- USB_STOR_PRINTF("BBB_reset done\n");
+ mdelay(150);
+ debug("BBB_reset result %d: status %lX clearing OUT endpoint\n",
+ result, us->pusb_dev->status);
+ debug("BBB_reset done\n");
return 0;
}
unsigned char cmd[12];
int result;
- USB_STOR_PRINTF("CB_reset\n");
+ debug("CB_reset\n");
memset(cmd, 0xff, sizeof(cmd));
cmd[0] = SCSI_SEND_DIAG;
cmd[1] = 4;
USB_CNTL_TIMEOUT * 5);
/* long wait for reset */
- wait_ms(1500);
- USB_STOR_PRINTF("CB_reset result %d: status %X"
- " clearing endpoint halt\n", result,
- us->pusb_dev->status);
+ mdelay(1500);
+ debug("CB_reset result %d: status %lX clearing endpoint halt\n",
+ result, us->pusb_dev->status);
usb_clear_halt(us->pusb_dev, usb_rcvbulkpipe(us->pusb_dev, us->ep_in));
usb_clear_halt(us->pusb_dev, usb_rcvbulkpipe(us->pusb_dev, us->ep_out));
- USB_STOR_PRINTF("CB_reset done\n");
+ debug("CB_reset done\n");
return 0;
}
* Set up the command for a BBB device. Note that the actual SCSI
* command is copied into cbw.CBWCDB.
*/
-int usb_stor_BBB_comdat(ccb *srb, struct us_data *us)
+static int usb_stor_BBB_comdat(ccb *srb, struct us_data *us)
{
int result;
int actlen;
int dir_in;
unsigned int pipe;
- umass_bbb_cbw_t cbw;
+ ALLOC_CACHE_ALIGN_BUFFER(umass_bbb_cbw_t, cbw, 1);
dir_in = US_DIRECTION(srb->cmd[0]);
#ifdef BBB_COMDAT_TRACE
- printf("dir %d lun %d cmdlen %d cmd %p datalen %d pdata %p\n",
+ printf("dir %d lun %d cmdlen %d cmd %p datalen %lu pdata %p\n",
dir_in, srb->lun, srb->cmdlen, srb->cmd, srb->datalen,
srb->pdata);
if (srb->cmdlen) {
#endif
/* sanity checks */
if (!(srb->cmdlen <= CBWCDBLENGTH)) {
- USB_STOR_PRINTF("usb_stor_BBB_comdat:cmdlen too large\n");
+ debug("usb_stor_BBB_comdat:cmdlen too large\n");
return -1;
}
/* always OUT to the ep */
pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
- cbw.dCBWSignature = cpu_to_le32(CBWSIGNATURE);
- cbw.dCBWTag = cpu_to_le32(CBWTag++);
- cbw.dCBWDataTransferLength = cpu_to_le32(srb->datalen);
- cbw.bCBWFlags = (dir_in ? CBWFLAGS_IN : CBWFLAGS_OUT);
- cbw.bCBWLUN = srb->lun;
- cbw.bCDBLength = srb->cmdlen;
+ cbw->dCBWSignature = cpu_to_le32(CBWSIGNATURE);
+ cbw->dCBWTag = cpu_to_le32(CBWTag++);
+ cbw->dCBWDataTransferLength = cpu_to_le32(srb->datalen);
+ cbw->bCBWFlags = (dir_in ? CBWFLAGS_IN : CBWFLAGS_OUT);
+ cbw->bCBWLUN = srb->lun;
+ cbw->bCDBLength = srb->cmdlen;
/* copy the command data into the CBW command data buffer */
/* DST SRC LEN!!! */
- memcpy(cbw.CBWCDB, srb->cmd, srb->cmdlen);
- result = usb_bulk_msg(us->pusb_dev, pipe, &cbw, UMASS_BBB_CBW_SIZE,
+ memcpy(cbw->CBWCDB, srb->cmd, srb->cmdlen);
+ result = usb_bulk_msg(us->pusb_dev, pipe, cbw, UMASS_BBB_CBW_SIZE,
&actlen, USB_CNTL_TIMEOUT * 5);
if (result < 0)
- USB_STOR_PRINTF("usb_stor_BBB_comdat:usb_bulk_msg error\n");
+ debug("usb_stor_BBB_comdat:usb_bulk_msg error\n");
return result;
}
/* FIXME: we also need a CBI_command which sets up the completion
* interrupt, and waits for it
*/
-int usb_stor_CB_comdat(ccb *srb, struct us_data *us)
+static int usb_stor_CB_comdat(ccb *srb, struct us_data *us)
{
int result = 0;
int dir_in, retry;
pipe = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
while (retry--) {
- USB_STOR_PRINTF("CBI gets a command: Try %d\n", 5 - retry);
-#ifdef USB_STOR_DEBUG
+ debug("CBI gets a command: Try %d\n", 5 - retry);
+#ifdef DEBUG
usb_show_srb(srb);
#endif
/* let's send the command via the control pipe */
0, us->ifnum,
srb->cmd, srb->cmdlen,
USB_CNTL_TIMEOUT * 5);
- USB_STOR_PRINTF("CB_transport: control msg returned %d,"
- " status %X\n", result, us->pusb_dev->status);
+ debug("CB_transport: control msg returned %d, status %lX\n",
+ result, us->pusb_dev->status);
/* check the return code for the command */
if (result < 0) {
if (us->pusb_dev->status & USB_ST_STALLED) {
status = us->pusb_dev->status;
- USB_STOR_PRINTF(" stall during command found,"
- " clear pipe\n");
+ debug(" stall during command found," \
+ " clear pipe\n");
usb_clear_halt(us->pusb_dev,
usb_sndctrlpipe(us->pusb_dev, 0));
us->pusb_dev->status = status;
}
- USB_STOR_PRINTF(" error during command %02X"
- " Stat = %X\n", srb->cmd[0],
- us->pusb_dev->status);
+ debug(" error during command %02X" \
+ " Stat = %lX\n", srb->cmd[0],
+ us->pusb_dev->status);
return result;
}
/* transfer the data payload for this command, if one exists*/
- USB_STOR_PRINTF("CB_transport: control msg returned %d,"
- " direction is %s to go 0x%lx\n", result,
- dir_in ? "IN" : "OUT", srb->datalen);
+ debug("CB_transport: control msg returned %d," \
+ " direction is %s to go 0x%lx\n", result,
+ dir_in ? "IN" : "OUT", srb->datalen);
if (srb->datalen) {
result = us_one_transfer(us, pipe, (char *)srb->pdata,
srb->datalen);
- USB_STOR_PRINTF("CBI attempted to transfer data,"
- " result is %d status %lX, len %d\n",
- result, us->pusb_dev->status,
- us->pusb_dev->act_len);
+ debug("CBI attempted to transfer data," \
+ " result is %d status %lX, len %d\n",
+ result, us->pusb_dev->status,
+ us->pusb_dev->act_len);
if (!(us->pusb_dev->status & USB_ST_NAK_REC))
break;
} /* if (srb->datalen) */
}
-int usb_stor_CBI_get_status(ccb *srb, struct us_data *us)
+static int usb_stor_CBI_get_status(ccb *srb, struct us_data *us)
{
int timeout;
(void *) &us->ip_data, us->irqmaxp, us->irqinterval);
timeout = 1000;
while (timeout--) {
- if ((volatile int *) us->ip_wanted == 0)
+ if ((volatile int *) us->ip_wanted == NULL)
break;
- wait_ms(10);
+ mdelay(10);
}
if (us->ip_wanted) {
printf(" Did not get interrupt on CBI\n");
us->ip_wanted = 0;
return USB_STOR_TRANSPORT_ERROR;
}
- USB_STOR_PRINTF
- ("Got interrupt data 0x%x, transfered %d status 0x%lX\n",
- us->ip_data, us->pusb_dev->irq_act_len,
- us->pusb_dev->irq_status);
+ debug("Got interrupt data 0x%x, transfered %d status 0x%lX\n",
+ us->ip_data, us->pusb_dev->irq_act_len,
+ us->pusb_dev->irq_status);
/* UFI gives us ASC and ASCQ, like a request sense */
if (us->subclass == US_SC_UFI) {
if (srb->cmd[0] == SCSI_REQ_SENSE ||
#define USB_TRANSPORT_NOT_READY_RETRY 10
/* clear a stall on an endpoint - special for BBB devices */
-int usb_stor_BBB_clear_endpt_stall(struct us_data *us, __u8 endpt)
+static int usb_stor_BBB_clear_endpt_stall(struct us_data *us, __u8 endpt)
{
int result;
/* ENDPOINT_HALT = 0, so set value to 0 */
result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev, 0),
USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT,
- 0, endpt, 0, 0, USB_CNTL_TIMEOUT * 5);
+ 0, endpt, NULL, 0, USB_CNTL_TIMEOUT * 5);
return result;
}
-int usb_stor_BBB_transport(ccb *srb, struct us_data *us)
+static int usb_stor_BBB_transport(ccb *srb, struct us_data *us)
{
int result, retry;
int dir_in;
int actlen, data_actlen;
unsigned int pipe, pipein, pipeout;
- umass_bbb_csw_t csw;
+ ALLOC_CACHE_ALIGN_BUFFER(umass_bbb_csw_t, csw, 1);
#ifdef BBB_XPORT_TRACE
unsigned char *ptr;
int index;
dir_in = US_DIRECTION(srb->cmd[0]);
/* COMMAND phase */
- USB_STOR_PRINTF("COMMAND phase\n");
+ debug("COMMAND phase\n");
result = usb_stor_BBB_comdat(srb, us);
if (result < 0) {
- USB_STOR_PRINTF("failed to send CBW status %ld\n",
- us->pusb_dev->status);
+ debug("failed to send CBW status %ld\n",
+ us->pusb_dev->status);
usb_stor_BBB_reset(us);
return USB_STOR_TRANSPORT_FAILED;
}
- wait_ms(5);
+ if (!(us->flags & USB_READY))
+ mdelay(5);
pipein = usb_rcvbulkpipe(us->pusb_dev, us->ep_in);
pipeout = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
/* DATA phase + error handling */
/* no data, go immediately to the STATUS phase */
if (srb->datalen == 0)
goto st;
- USB_STOR_PRINTF("DATA phase\n");
+ debug("DATA phase\n");
if (dir_in)
pipe = pipein;
else
&data_actlen, USB_CNTL_TIMEOUT * 5);
/* special handling of STALL in DATA phase */
if ((result < 0) && (us->pusb_dev->status & USB_ST_STALLED)) {
- USB_STOR_PRINTF("DATA:stall\n");
+ debug("DATA:stall\n");
/* clear the STALL on the endpoint */
result = usb_stor_BBB_clear_endpt_stall(us,
dir_in ? us->ep_in : us->ep_out);
goto st;
}
if (result < 0) {
- USB_STOR_PRINTF("usb_bulk_msg error status %ld\n",
- us->pusb_dev->status);
+ debug("usb_bulk_msg error status %ld\n",
+ us->pusb_dev->status);
usb_stor_BBB_reset(us);
return USB_STOR_TRANSPORT_FAILED;
}
st:
retry = 0;
again:
- USB_STOR_PRINTF("STATUS phase\n");
- result = usb_bulk_msg(us->pusb_dev, pipein, &csw, UMASS_BBB_CSW_SIZE,
+ debug("STATUS phase\n");
+ result = usb_bulk_msg(us->pusb_dev, pipein, csw, UMASS_BBB_CSW_SIZE,
&actlen, USB_CNTL_TIMEOUT*5);
/* special handling of STALL in STATUS phase */
if ((result < 0) && (retry < 1) &&
(us->pusb_dev->status & USB_ST_STALLED)) {
- USB_STOR_PRINTF("STATUS:stall\n");
+ debug("STATUS:stall\n");
/* clear the STALL on the endpoint */
result = usb_stor_BBB_clear_endpt_stall(us, us->ep_in);
if (result >= 0 && (retry++ < 1))
goto again;
}
if (result < 0) {
- USB_STOR_PRINTF("usb_bulk_msg error status %ld\n",
- us->pusb_dev->status);
+ debug("usb_bulk_msg error status %ld\n",
+ us->pusb_dev->status);
usb_stor_BBB_reset(us);
return USB_STOR_TRANSPORT_FAILED;
}
#ifdef BBB_XPORT_TRACE
- ptr = (unsigned char *)&csw;
+ ptr = (unsigned char *)csw;
for (index = 0; index < UMASS_BBB_CSW_SIZE; index++)
printf("ptr[%d] %#x ", index, ptr[index]);
printf("\n");
#endif
/* misuse pipe to get the residue */
- pipe = le32_to_cpu(csw.dCSWDataResidue);
+ pipe = le32_to_cpu(csw->dCSWDataResidue);
if (pipe == 0 && srb->datalen != 0 && srb->datalen - data_actlen != 0)
pipe = srb->datalen - data_actlen;
- if (CSWSIGNATURE != le32_to_cpu(csw.dCSWSignature)) {
- USB_STOR_PRINTF("!CSWSIGNATURE\n");
+ if (CSWSIGNATURE != le32_to_cpu(csw->dCSWSignature)) {
+ debug("!CSWSIGNATURE\n");
usb_stor_BBB_reset(us);
return USB_STOR_TRANSPORT_FAILED;
- } else if ((CBWTag - 1) != le32_to_cpu(csw.dCSWTag)) {
- USB_STOR_PRINTF("!Tag\n");
+ } else if ((CBWTag - 1) != le32_to_cpu(csw->dCSWTag)) {
+ debug("!Tag\n");
usb_stor_BBB_reset(us);
return USB_STOR_TRANSPORT_FAILED;
- } else if (csw.bCSWStatus > CSWSTATUS_PHASE) {
- USB_STOR_PRINTF(">PHASE\n");
+ } else if (csw->bCSWStatus > CSWSTATUS_PHASE) {
+ debug(">PHASE\n");
usb_stor_BBB_reset(us);
return USB_STOR_TRANSPORT_FAILED;
- } else if (csw.bCSWStatus == CSWSTATUS_PHASE) {
- USB_STOR_PRINTF("=PHASE\n");
+ } else if (csw->bCSWStatus == CSWSTATUS_PHASE) {
+ debug("=PHASE\n");
usb_stor_BBB_reset(us);
return USB_STOR_TRANSPORT_FAILED;
} else if (data_actlen > srb->datalen) {
- USB_STOR_PRINTF("transferred %dB instead of %dB\n",
- data_actlen, srb->datalen);
+ debug("transferred %dB instead of %ldB\n",
+ data_actlen, srb->datalen);
return USB_STOR_TRANSPORT_FAILED;
- } else if (csw.bCSWStatus == CSWSTATUS_FAILED) {
- USB_STOR_PRINTF("FAILED\n");
+ } else if (csw->bCSWStatus == CSWSTATUS_FAILED) {
+ debug("FAILED\n");
return USB_STOR_TRANSPORT_FAILED;
}
return result;
}
-int usb_stor_CB_transport(ccb *srb, struct us_data *us)
+static int usb_stor_CB_transport(ccb *srb, struct us_data *us)
{
int result, status;
ccb *psrb;
/* issue the command */
do_retry:
result = usb_stor_CB_comdat(srb, us);
- USB_STOR_PRINTF("command / Data returned %d, status %X\n",
- result, us->pusb_dev->status);
+ debug("command / Data returned %d, status %lX\n",
+ result, us->pusb_dev->status);
/* if this is an CBI Protocol, get IRQ */
if (us->protocol == US_PR_CBI) {
status = usb_stor_CBI_get_status(srb, us);
/* if the status is error, report it */
if (status == USB_STOR_TRANSPORT_ERROR) {
- USB_STOR_PRINTF(" USB CBI Command Error\n");
+ debug(" USB CBI Command Error\n");
return status;
}
srb->sense_buf[12] = (unsigned char)(us->ip_data >> 8);
if (!us->ip_data) {
/* if the status is good, report it */
if (status == USB_STOR_TRANSPORT_GOOD) {
- USB_STOR_PRINTF(" USB CBI Command Good\n");
+ debug(" USB CBI Command Good\n");
return status;
}
}
/* do we have to issue an auto request? */
/* HERE we have to check the result */
if ((result < 0) && !(us->pusb_dev->status & USB_ST_STALLED)) {
- USB_STOR_PRINTF("ERROR %X\n", us->pusb_dev->status);
+ debug("ERROR %lX\n", us->pusb_dev->status);
us->transport_reset(us);
return USB_STOR_TRANSPORT_ERROR;
}
((srb->cmd[0] == SCSI_REQ_SENSE) ||
(srb->cmd[0] == SCSI_INQUIRY))) {
/* do not issue an autorequest after request sense */
- USB_STOR_PRINTF("No auto request and good\n");
+ debug("No auto request and good\n");
return USB_STOR_TRANSPORT_GOOD;
}
/* issue an request_sense */
psrb->cmdlen = 12;
/* issue the command */
result = usb_stor_CB_comdat(psrb, us);
- USB_STOR_PRINTF("auto request returned %d\n", result);
+ debug("auto request returned %d\n", result);
/* if this is an CBI Protocol, get IRQ */
if (us->protocol == US_PR_CBI)
status = usb_stor_CBI_get_status(psrb, us);
if ((result < 0) && !(us->pusb_dev->status & USB_ST_STALLED)) {
- USB_STOR_PRINTF(" AUTO REQUEST ERROR %d\n",
- us->pusb_dev->status);
+ debug(" AUTO REQUEST ERROR %ld\n",
+ us->pusb_dev->status);
return USB_STOR_TRANSPORT_ERROR;
}
- USB_STOR_PRINTF("autorequest returned 0x%02X 0x%02X 0x%02X 0x%02X\n",
- srb->sense_buf[0], srb->sense_buf[2],
- srb->sense_buf[12], srb->sense_buf[13]);
+ debug("autorequest returned 0x%02X 0x%02X 0x%02X 0x%02X\n",
+ srb->sense_buf[0], srb->sense_buf[2],
+ srb->sense_buf[12], srb->sense_buf[13]);
/* Check the auto request result */
if ((srb->sense_buf[2] == 0) &&
(srb->sense_buf[12] == 0) &&
srb->sense_buf[12], srb->sense_buf[13]);
return USB_STOR_TRANSPORT_FAILED;
} else {
- wait_ms(100);
+ mdelay(100);
goto do_retry;
}
break;
do {
memset(&srb->cmd[0], 0, 12);
srb->cmd[0] = SCSI_INQUIRY;
+ srb->cmd[1] = srb->lun << 5;
srb->cmd[4] = 36;
srb->datalen = 36;
srb->cmdlen = 12;
i = ss->transport(srb, ss);
- USB_STOR_PRINTF("inquiry returns %d\n", i);
+ debug("inquiry returns %d\n", i);
if (i == 0)
break;
} while (--retry);
ptr = (char *)srb->pdata;
memset(&srb->cmd[0], 0, 12);
srb->cmd[0] = SCSI_REQ_SENSE;
+ srb->cmd[1] = srb->lun << 5;
srb->cmd[4] = 18;
srb->datalen = 18;
srb->pdata = &srb->sense_buf[0];
srb->cmdlen = 12;
ss->transport(srb, ss);
- USB_STOR_PRINTF("Request Sense returned %02X %02X %02X\n",
- srb->sense_buf[2], srb->sense_buf[12],
- srb->sense_buf[13]);
+ debug("Request Sense returned %02X %02X %02X\n",
+ srb->sense_buf[2], srb->sense_buf[12],
+ srb->sense_buf[13]);
srb->pdata = (uchar *)ptr;
return 0;
}
do {
memset(&srb->cmd[0], 0, 12);
srb->cmd[0] = SCSI_TST_U_RDY;
+ srb->cmd[1] = srb->lun << 5;
srb->datalen = 0;
srb->cmdlen = 12;
- if (ss->transport(srb, ss) == USB_STOR_TRANSPORT_GOOD)
+ if (ss->transport(srb, ss) == USB_STOR_TRANSPORT_GOOD) {
+ ss->flags |= USB_READY;
return 0;
+ }
usb_request_sense(srb, ss);
- wait_ms(100);
+ /*
+ * Check the Key Code Qualifier, if it matches
+ * "Not Ready - medium not present"
+ * (the sense Key equals 0x2 and the ASC is 0x3a)
+ * return immediately as the medium being absent won't change
+ * unless there is a user action.
+ */
+ if ((srb->sense_buf[2] == 0x02) &&
+ (srb->sense_buf[12] == 0x3a))
+ return -1;
+ mdelay(100);
} while (retries--);
return -1;
do {
memset(&srb->cmd[0], 0, 12);
srb->cmd[0] = SCSI_RD_CAPAC;
+ srb->cmd[1] = srb->lun << 5;
srb->datalen = 8;
srb->cmdlen = 12;
if (ss->transport(srb, ss) == USB_STOR_TRANSPORT_GOOD)
{
memset(&srb->cmd[0], 0, 12);
srb->cmd[0] = SCSI_READ10;
+ srb->cmd[1] = srb->lun << 5;
srb->cmd[2] = ((unsigned char) (start >> 24)) & 0xff;
srb->cmd[3] = ((unsigned char) (start >> 16)) & 0xff;
srb->cmd[4] = ((unsigned char) (start >> 8)) & 0xff;
srb->cmd[7] = ((unsigned char) (blocks >> 8)) & 0xff;
srb->cmd[8] = (unsigned char) blocks & 0xff;
srb->cmdlen = 12;
- USB_STOR_PRINTF("read10: start %lx blocks %x\n", start, blocks);
+ debug("read10: start %lx blocks %x\n", start, blocks);
return ss->transport(srb, ss);
}
{
memset(&srb->cmd[0], 0, 12);
srb->cmd[0] = SCSI_WRITE10;
+ srb->cmd[1] = srb->lun << 5;
srb->cmd[2] = ((unsigned char) (start >> 24)) & 0xff;
srb->cmd[3] = ((unsigned char) (start >> 16)) & 0xff;
srb->cmd[4] = ((unsigned char) (start >> 8)) & 0xff;
srb->cmd[7] = ((unsigned char) (blocks >> 8)) & 0xff;
srb->cmd[8] = (unsigned char) blocks & 0xff;
srb->cmdlen = 12;
- USB_STOR_PRINTF("write10: start %lx blocks %x\n", start, blocks);
+ debug("write10: start %lx blocks %x\n", start, blocks);
return ss->transport(srb, ss);
}
}
#endif /* CONFIG_USB_BIN_FIXUP */
-#define USB_MAX_READ_BLK 20
-
unsigned long usb_stor_read(int device, unsigned long blknr,
- unsigned long blkcnt, void *buffer)
+ lbaint_t blkcnt, void *buffer)
{
- unsigned long start, blks, buf_addr;
+ lbaint_t start, blks;
+ uintptr_t buf_addr;
unsigned short smallblks;
struct usb_device *dev;
+ struct us_data *ss;
int retry, i;
ccb *srb = &usb_ccb;
device &= 0xff;
/* Setup device */
- USB_STOR_PRINTF("\nusb_read: dev %d \n", device);
+ debug("\nusb_read: dev %d \n", device);
dev = NULL;
for (i = 0; i < USB_MAX_DEVICE; i++) {
dev = usb_get_dev_index(i);
if (dev->devnum == usb_dev_desc[device].target)
break;
}
+ ss = (struct us_data *)dev->privptr;
usb_disable_asynch(1); /* asynch transfer not allowed */
srb->lun = usb_dev_desc[device].lun;
buf_addr = (unsigned long)buffer;
start = blknr;
blks = blkcnt;
- if (usb_test_unit_ready(srb, (struct us_data *)dev->privptr)) {
- printf("Device NOT ready\n Request Sense returned %02X %02X"
- " %02X\n", srb->sense_buf[2], srb->sense_buf[12],
- srb->sense_buf[13]);
- return 0;
- }
- USB_STOR_PRINTF("\nusb_read: dev %d startblk %lx, blccnt %lx"
- " buffer %lx\n", device, start, blks, buf_addr);
+ debug("\nusb_read: dev %d startblk " LBAF ", blccnt " LBAF
+ " buffer %lx\n", device, start, blks, buf_addr);
do {
/* XXX need some comment here */
retry = 2;
srb->pdata = (unsigned char *)buf_addr;
- if (blks > USB_MAX_READ_BLK)
- smallblks = USB_MAX_READ_BLK;
+ if (blks > USB_MAX_XFER_BLK)
+ smallblks = USB_MAX_XFER_BLK;
else
smallblks = (unsigned short) blks;
retry_it:
- if (smallblks == USB_MAX_READ_BLK)
+ if (smallblks == USB_MAX_XFER_BLK)
usb_show_progress();
srb->datalen = usb_dev_desc[device].blksz * smallblks;
srb->pdata = (unsigned char *)buf_addr;
- if (usb_read_10(srb, (struct us_data *)dev->privptr, start,
- smallblks)) {
- USB_STOR_PRINTF("Read ERROR\n");
- usb_request_sense(srb, (struct us_data *)dev->privptr);
+ if (usb_read_10(srb, ss, start, smallblks)) {
+ debug("Read ERROR\n");
+ usb_request_sense(srb, ss);
if (retry--)
goto retry_it;
blkcnt -= blks;
blks -= smallblks;
buf_addr += srb->datalen;
} while (blks != 0);
+ ss->flags &= ~USB_READY;
- USB_STOR_PRINTF("usb_read: end startblk %lx, blccnt %x buffer %lx\n",
- start, smallblks, buf_addr);
+ debug("usb_read: end startblk " LBAF
+ ", blccnt %x buffer %lx\n",
+ start, smallblks, buf_addr);
usb_disable_asynch(0); /* asynch transfer allowed */
- if (blkcnt >= USB_MAX_READ_BLK)
- printf("\n");
+ if (blkcnt >= USB_MAX_XFER_BLK)
+ debug("\n");
return blkcnt;
}
-#define USB_MAX_WRITE_BLK 20
-
unsigned long usb_stor_write(int device, unsigned long blknr,
- unsigned long blkcnt, const void *buffer)
+ lbaint_t blkcnt, const void *buffer)
{
- unsigned long start, blks, buf_addr;
+ lbaint_t start, blks;
+ uintptr_t buf_addr;
unsigned short smallblks;
struct usb_device *dev;
+ struct us_data *ss;
int retry, i;
ccb *srb = &usb_ccb;
device &= 0xff;
/* Setup device */
- USB_STOR_PRINTF("\nusb_write: dev %d \n", device);
+ debug("\nusb_write: dev %d \n", device);
dev = NULL;
for (i = 0; i < USB_MAX_DEVICE; i++) {
dev = usb_get_dev_index(i);
if (dev->devnum == usb_dev_desc[device].target)
break;
}
+ ss = (struct us_data *)dev->privptr;
usb_disable_asynch(1); /* asynch transfer not allowed */
buf_addr = (unsigned long)buffer;
start = blknr;
blks = blkcnt;
- if (usb_test_unit_ready(srb, (struct us_data *)dev->privptr)) {
- printf("Device NOT ready\n Request Sense returned %02X %02X"
- " %02X\n", srb->sense_buf[2], srb->sense_buf[12],
- srb->sense_buf[13]);
- return 0;
- }
- USB_STOR_PRINTF("\nusb_write: dev %d startblk %lx, blccnt %lx"
- " buffer %lx\n", device, start, blks, buf_addr);
+ debug("\nusb_write: dev %d startblk " LBAF ", blccnt " LBAF
+ " buffer %lx\n", device, start, blks, buf_addr);
do {
/* If write fails retry for max retry count else
*/
retry = 2;
srb->pdata = (unsigned char *)buf_addr;
- if (blks > USB_MAX_WRITE_BLK)
- smallblks = USB_MAX_WRITE_BLK;
+ if (blks > USB_MAX_XFER_BLK)
+ smallblks = USB_MAX_XFER_BLK;
else
smallblks = (unsigned short) blks;
retry_it:
- if (smallblks == USB_MAX_WRITE_BLK)
+ if (smallblks == USB_MAX_XFER_BLK)
usb_show_progress();
srb->datalen = usb_dev_desc[device].blksz * smallblks;
srb->pdata = (unsigned char *)buf_addr;
- if (usb_write_10(srb, (struct us_data *)dev->privptr, start,
- smallblks)) {
- USB_STOR_PRINTF("Write ERROR\n");
- usb_request_sense(srb, (struct us_data *)dev->privptr);
+ if (usb_write_10(srb, ss, start, smallblks)) {
+ debug("Write ERROR\n");
+ usb_request_sense(srb, ss);
if (retry--)
goto retry_it;
blkcnt -= blks;
blks -= smallblks;
buf_addr += srb->datalen;
} while (blks != 0);
+ ss->flags &= ~USB_READY;
- USB_STOR_PRINTF("usb_write: end startblk %lx, blccnt %x buffer %lx\n",
- start, smallblks, buf_addr);
+ debug("usb_write: end startblk " LBAF ", blccnt %x buffer %lx\n",
+ start, smallblks, buf_addr);
usb_disable_asynch(0); /* asynch transfer allowed */
- if (blkcnt >= USB_MAX_WRITE_BLK)
- printf("\n");
+ if (blkcnt >= USB_MAX_XFER_BLK)
+ debug("\n");
return blkcnt;
}
{
struct usb_interface *iface;
int i;
+ struct usb_endpoint_descriptor *ep_desc;
unsigned int flags = 0;
int protocol = 0;
#if 0
/* this is the place to patch some storage devices */
- USB_STOR_PRINTF("iVendor %X iProduct %X\n", dev->descriptor.idVendor,
+ debug("iVendor %X iProduct %X\n", dev->descriptor.idVendor,
dev->descriptor.idProduct);
if ((dev->descriptor.idVendor) == 0x066b &&
(dev->descriptor.idProduct) == 0x0103) {
- USB_STOR_PRINTF("patched for E-USB\n");
+ debug("patched for E-USB\n");
protocol = US_PR_CB;
subclass = US_SC_UFI; /* an assumption */
}
memset(ss, 0, sizeof(struct us_data));
/* At this point, we know we've got a live one */
- USB_STOR_PRINTF("\n\nUSB Mass Storage device detected\n");
+ debug("\n\nUSB Mass Storage device detected\n");
/* Initialize the us_data structure with some useful info */
ss->flags = flags;
}
/* set the handler pointers based on the protocol */
- USB_STOR_PRINTF("Transport: ");
+ debug("Transport: ");
switch (ss->protocol) {
case US_PR_CB:
- USB_STOR_PRINTF("Control/Bulk\n");
+ debug("Control/Bulk\n");
ss->transport = usb_stor_CB_transport;
ss->transport_reset = usb_stor_CB_reset;
break;
case US_PR_CBI:
- USB_STOR_PRINTF("Control/Bulk/Interrupt\n");
+ debug("Control/Bulk/Interrupt\n");
ss->transport = usb_stor_CB_transport;
ss->transport_reset = usb_stor_CB_reset;
break;
case US_PR_BULK:
- USB_STOR_PRINTF("Bulk/Bulk/Bulk\n");
+ debug("Bulk/Bulk/Bulk\n");
ss->transport = usb_stor_BBB_transport;
ss->transport_reset = usb_stor_BBB_reset;
break;
* We will ignore any others.
*/
for (i = 0; i < iface->desc.bNumEndpoints; i++) {
+ ep_desc = &iface->ep_desc[i];
/* is it an BULK endpoint? */
- if ((iface->ep_desc[i].bmAttributes &
+ if ((ep_desc->bmAttributes &
USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) {
- if (iface->ep_desc[i].bEndpointAddress & USB_DIR_IN)
- ss->ep_in = iface->ep_desc[i].bEndpointAddress &
- USB_ENDPOINT_NUMBER_MASK;
+ if (ep_desc->bEndpointAddress & USB_DIR_IN)
+ ss->ep_in = ep_desc->bEndpointAddress &
+ USB_ENDPOINT_NUMBER_MASK;
else
ss->ep_out =
- iface->ep_desc[i].bEndpointAddress &
+ ep_desc->bEndpointAddress &
USB_ENDPOINT_NUMBER_MASK;
}
/* is it an interrupt endpoint? */
- if ((iface->ep_desc[i].bmAttributes &
- USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) {
- ss->ep_int = iface->ep_desc[i].bEndpointAddress &
- USB_ENDPOINT_NUMBER_MASK;
- ss->irqinterval = iface->ep_desc[i].bInterval;
+ if ((ep_desc->bmAttributes &
+ USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) {
+ ss->ep_int = ep_desc->bEndpointAddress &
+ USB_ENDPOINT_NUMBER_MASK;
+ ss->irqinterval = ep_desc->bInterval;
}
}
- USB_STOR_PRINTF("Endpoints In %d Out %d Int %d\n",
- ss->ep_in, ss->ep_out, ss->ep_int);
+ debug("Endpoints In %d Out %d Int %d\n",
+ ss->ep_in, ss->ep_out, ss->ep_int);
/* Do some basic sanity checks, and bail if we find a problem */
if (usb_set_interface(dev, iface->desc.bInterfaceNumber, 0) ||
!ss->ep_in || !ss->ep_out ||
(ss->protocol == US_PR_CBI && ss->ep_int == 0)) {
- USB_STOR_PRINTF("Problems with device\n");
+ debug("Problems with device\n");
return 0;
}
/* set class specific stuff */
block_dev_desc_t *dev_desc)
{
unsigned char perq, modi;
- unsigned long cap[2];
+ ALLOC_CACHE_ALIGN_BUFFER(unsigned long, cap, 2);
+ ALLOC_CACHE_ALIGN_BUFFER(unsigned char, usb_stor_buf, 36);
unsigned long *capacity, *blksz;
ccb *pccb = &usb_ccb;
- /* for some reasons a couple of devices would not survive this reset */
- if (
- /* Sony USM256E */
- (dev->descriptor.idVendor == 0x054c &&
- dev->descriptor.idProduct == 0x019e)
- ||
- /* USB007 Mini-USB2 Flash Drive */
- (dev->descriptor.idVendor == 0x066f &&
- dev->descriptor.idProduct == 0x2010)
- ||
- /* SanDisk Corporation Cruzer Micro 20044318410546613953 */
- (dev->descriptor.idVendor == 0x0781 &&
- dev->descriptor.idProduct == 0x5151)
- ||
- /*
- * SanDisk Corporation U3 Cruzer Micro 1/4GB
- * Flash Drive 000016244373FFB4
- */
- (dev->descriptor.idVendor == 0x0781 &&
- dev->descriptor.idProduct == 0x5406)
- )
- USB_STOR_PRINTF("usb_stor_get_info: skipping RESET..\n");
- else
- ss->transport_reset(ss);
-
pccb->pdata = usb_stor_buf;
dev_desc->target = dev->devnum;
pccb->lun = dev_desc->lun;
- USB_STOR_PRINTF(" address %d\n", dev_desc->target);
+ debug(" address %d\n", dev_desc->target);
if (usb_inquiry(pccb, ss))
return -1;
/* drive is removable */
dev_desc->removable = 1;
}
- memcpy(&dev_desc->vendor[0], &usb_stor_buf[8], 8);
- memcpy(&dev_desc->product[0], &usb_stor_buf[16], 16);
- memcpy(&dev_desc->revision[0], &usb_stor_buf[32], 4);
+ memcpy(&dev_desc->vendor[0], (const void *) &usb_stor_buf[8], 8);
+ memcpy(&dev_desc->product[0], (const void *) &usb_stor_buf[16], 16);
+ memcpy(&dev_desc->revision[0], (const void *) &usb_stor_buf[32], 4);
dev_desc->vendor[8] = 0;
dev_desc->product[16] = 0;
dev_desc->revision[4] = 0;
usb_bin_fixup(dev->descriptor, (uchar *)dev_desc->vendor,
(uchar *)dev_desc->product);
#endif /* CONFIG_USB_BIN_FIXUP */
- USB_STOR_PRINTF("ISO Vers %X, Response Data %X\n", usb_stor_buf[2],
- usb_stor_buf[3]);
+ debug("ISO Vers %X, Response Data %X\n", usb_stor_buf[2],
+ usb_stor_buf[3]);
if (usb_test_unit_ready(pccb, ss)) {
printf("Device NOT ready\n"
" Request Sense returned %02X %02X %02X\n",
cap[0] = 2880;
cap[1] = 0x200;
}
- USB_STOR_PRINTF("Read Capacity returns: 0x%lx, 0x%lx\n", cap[0],
- cap[1]);
+ ss->flags &= ~USB_READY;
+ debug("Read Capacity returns: 0x%lx, 0x%lx\n", cap[0], cap[1]);
#if 0
if (cap[0] > (0x200000 * 10)) /* greater than 10 GByte */
cap[0] >>= 16;
cap[0] += 1;
capacity = &cap[0];
blksz = &cap[1];
- USB_STOR_PRINTF("Capacity = 0x%lx, blocksz = 0x%lx\n",
- *capacity, *blksz);
+ debug("Capacity = 0x%lx, blocksz = 0x%lx\n", *capacity, *blksz);
dev_desc->lba = *capacity;
dev_desc->blksz = *blksz;
+ dev_desc->log2blksz = LOG2(dev_desc->blksz);
dev_desc->type = perq;
- USB_STOR_PRINTF(" address %d\n", dev_desc->target);
- USB_STOR_PRINTF("partype: %d\n", dev_desc->part_type);
+ debug(" address %d\n", dev_desc->target);
+ debug("partype: %d\n", dev_desc->part_type);
init_part(dev_desc);
- USB_STOR_PRINTF("partype: %d\n", dev_desc->part_type);
+ debug("partype: %d\n", dev_desc->part_type);
return 1;
}
projects / J-u-boot.git / blobdiff