configs: Migrate CONFIG_SYS_LDSCRIPT to Kconfig

[J-u-boot.git] / configs / ap121_defconfig

diff --git a/configs/ap121_defconfig b/configs/ap121_defconfig
index d21fa04fe69fca8209a01658be5fc0d8b456cfd3..eca24e9d2555c6904c66c21b54331289da4c0703 100644 (file)
--- a/configs/ap121_defconfig
+++ b/configs/ap121_defconfig
@@ -1,29 +1,42 @@
 CONFIG_MIPS=y
+CONFIG_SYS_TEXT_BASE=0x9F000000
 CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_DEBUG_UART_BASE=0xb8020000
+CONFIG_DEBUG_UART_CLOCK=25000000
 CONFIG_ARCH_ATH79=y
-CONFIG_DEFAULT_DEVICE_TREE="ap121"
+CONFIG_DEBUG_UART=y
 CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs"
 CONFIG_DISPLAY_CPUINFO=y
+CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SYS_PROMPT="ap121 # "
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_CONSOLE is not set
 # CONFIG_CMD_ELF is not set
-# CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_XIMG is not set
 # CONFIG_CMD_EXPORTENV is not set
 # CONFIG_CMD_IMPORTENV is not set
 # CONFIG_CMD_EDITENV is not set
 # CONFIG_CMD_CRC32 is not set
+CONFIG_CMD_MEMTEST=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_SF=y
 CONFIG_CMD_SPI=y
-# CONFIG_CMD_FPGA is not set
 CONFIG_CMD_DHCP=y
 CONFIG_CMD_PING=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDIDS_DEFAULT="nor0=spi-flash.0"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=spi-flash.0:256k(u-boot),64k(u-boot-env),6144k(rootfs),1600k(uImage),64k(NVRAM),64k(ART)"
+# CONFIG_ISO_PARTITION is not set
+CONFIG_DEFAULT_DEVICE_TREE="ap121"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_USE_ENV_SPI_MAX_HZ=y
+CONFIG_ENV_SPI_MAX_HZ=25000000
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_BAR=y
 CONFIG_SPI_FLASH_ATMEL=y
 CONFIG_SPI_FLASH_EON=y
 CONFIG_SPI_FLASH_GIGADEVICE=y
@@ -38,13 +51,11 @@ CONFIG_DM_ETH=y
 CONFIG_AG7XXX=y
 CONFIG_PINCTRL=y
 CONFIG_PINCONF=y
-CONFIG_AR933X_PINCTRL=y
+CONFIG_PINCTRL_AR933X=y
 CONFIG_DM_SERIAL=y
-CONFIG_DEBUG_UART=y
 CONFIG_DEBUG_UART_AR933X=y
-CONFIG_DEBUG_UART_BASE=0xb8020000
-CONFIG_DEBUG_UART_CLOCK=25000000
-CONFIG_DEBUG_UART_BOARD_INIT=y
 CONFIG_AR933X_UART=y
+CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_ATH79_SPI=y
+CONFIG_LZMA=y