]> Git Repo - J-u-boot.git/blobdiff - configs/bk4r1_defconfig
Merge branch '2022-06-28-Kconfig-migrations' into next
[J-u-boot.git] / configs / bk4r1_defconfig
index 8c2bda6984ae86ee537360d7095330125f09dd78..0f8955dbbf183c203842c505aa234f9fb2cd3fa6 100644 (file)
@@ -1,27 +1,39 @@
 CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_SYS_THUMB_BUILD=y
 CONFIG_ARCH_VF610=y
 CONFIG_SYS_TEXT_BASE=0x3f401000
+CONFIG_SYS_MALLOC_LEN=0x402000
 CONFIG_SYS_MALLOC_F_LEN=0x800
+CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_OFFSET=0x200000
 CONFIG_DM_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="vf610-bk4r1"
 CONFIG_BOOTCOUNT_BOOTLIMIT=3
 CONFIG_SYS_BOOTCOUNT_ADDR=0x4006e02c
-CONFIG_NR_DRAM_BANKS=1
 CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
 CONFIG_ENV_OFFSET_REDUND=0x220000
 CONFIG_TARGET_BK4R1=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
+CONFIG_SYS_MEMTEST_START=0x80010000
+CONFIG_SYS_MEMTEST_END=0x87c00000
+CONFIG_HAS_BOARD_SIZE_LIMIT=y
+CONFIG_BOARD_SIZE_LIMIT=520192
 CONFIG_FIT=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/phytec/pcm052/imximage.cfg"
 CONFIG_BOOTDELAY=3
+CONFIG_AUTOBOOT_KEYED=y
+CONFIG_AUTOBOOT_PROMPT="Enter passphrase to stop autoboot, booting in %d seconds\n"
+CONFIG_AUTOBOOT_STOP_STR="123"
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="run set_gpio122; run set_gpio96; sf probe; run manage_userdata; run bootcmd_nand"
 CONFIG_USE_PREBOOT=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_HUSH_PARSER=y
+CONFIG_SYS_CBSIZE=256
+CONFIG_SYS_PBSIZE=276
 # CONFIG_CMD_ELF is not set
 CONFIG_CMD_MEMTEST=y
-CONFIG_SYS_MEMTEST_START=0x80010000
-CONFIG_SYS_MEMTEST_END=0x87c00000
 CONFIG_CMD_DM=y
 CONFIG_CMD_FUSE=y
 CONFIG_CMD_GPIO=y
@@ -29,6 +41,7 @@ CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_NAND_TRIMFFS=y
 CONFIG_CMD_DHCP=y
+CONFIG_SYS_DISABLE_AUTOLOAD=y
 CONFIG_CMD_MII=y
 CONFIG_CMD_PING=y
 CONFIG_CMD_BOOTCOUNT=y
@@ -37,10 +50,11 @@ CONFIG_MTDIDS_DEFAULT="nand0=vf610_nfc,nor0=NOR"
 CONFIG_MTDPARTS_DEFAULT="mtdparts=vf610_nfc:2048k(bootloader),128k(env1),128k(env2),10240k(initrd),40960k(dtbkernel),-(system);NOR:-(nor)"
 CONFIG_CMD_UBI=y
 CONFIG_OF_CONTROL=y
-CONFIG_DEFAULT_DEVICE_TREE="vf610-bk4r1"
+CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_ARP_TIMEOUT=500
 CONFIG_NETCONSOLE=y
 CONFIG_DM=y
 CONFIG_BOOTCOUNT_LIMIT=y
@@ -54,16 +68,12 @@ CONFIG_LED_GPIO=y
 CONFIG_MISC=y
 CONFIG_I2C_EEPROM=y
 CONFIG_SYS_I2C_EEPROM_ADDR=0x50
-CONFIG_SYS_I2C_EEPROM_BUS=2
-CONFIG_SYS_EEPROM_SIZE=32768
-CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=6
-CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2
-CONFIG_DM_MMC=y
 CONFIG_FSL_ESDHC_IMX=y
 CONFIG_MTD=y
 CONFIG_DM_MTD=y
 CONFIG_NAND_VF610_NFC=y
 CONFIG_NAND_VF610_NFC_DT=y
+CONFIG_SYS_NAND_ONFI_DETECTION=y
 CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_STMICRO=y
This page took 0.025968 seconds and 4 git commands to generate.