mpc83xx: add h/w flash protection to board configs

[J-u-boot.git] / include / configs / MPC832XEMDS.h

diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index 702b073381eea5df4eb7c53a9a5e0facede2a1f7..9a9b500fa2d96ba585017b2c17df889dcf85f295 100644 (file)
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -143,7 +143,7 @@
 #undef  CFG_RAMBOOT
 #endif
 
-/* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */
+/* CFG_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
 #define CFG_MONITOR_LEN                (256 * 1024)    /* Reserve 256 kB for Mon */
 #define CFG_MALLOC_LEN         (128 * 1024)    /* Reserved for malloc */
 
@@ -166,9 +166,10 @@
  * FLASH on the Local Bus
  */
 #define CFG_FLASH_CFI          /* use the Common Flash Interface */
-#define CFG_FLASH_CFI_DRIVER   /* use the CFI driver */
+#define CONFIG_FLASH_CFI_DRIVER        /* use the CFI driver */
 #define CFG_FLASH_BASE         0xFE000000      /* FLASH base address */
 #define CFG_FLASH_SIZE         16      /* FLASH size is 16M */
+#define CFG_FLASH_PROTECTION   1               /* Use h/w Flash protection. */
 
 #define CFG_LBLAWBAR0_PRELIM   CFG_FLASH_BASE  /* Window base at flash base */
 #define CFG_LBLAWAR0_PRELIM    0x80000018      /* 32MB window size */
@@ -346,7 +347,7 @@
 #define CFG_PCI_MMIO_BASE      0x90000000
 #define CFG_PCI_MMIO_PHYS      CFG_PCI_MMIO_BASE
 #define CFG_PCI_MMIO_SIZE      0x10000000      /* 256M */
-#define CFG_PCI_IO_BASE                0xE0300000
+#define CFG_PCI_IO_BASE                0x00000000
 #define CFG_PCI_IO_PHYS                0xE0300000
 #define CFG_PCI_IO_SIZE                0x100000        /* 1M */
 
@@ -403,15 +404,15 @@
  * Environment
  */
 #ifndef CFG_RAMBOOT
-       #define CFG_ENV_IS_IN_FLASH     1
-       #define CFG_ENV_ADDR            (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
-       #define CFG_ENV_SECT_SIZE       0x20000
-       #define CFG_ENV_SIZE            0x2000
+       #define CONFIG_ENV_IS_IN_FLASH  1
+       #define CONFIG_ENV_ADDR         (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
+       #define CONFIG_ENV_SECT_SIZE    0x20000
+       #define CONFIG_ENV_SIZE         0x2000
 #else
        #define CFG_NO_FLASH            1       /* Flash is not usable now */
-       #define CFG_ENV_IS_NOWHERE      1       /* Store ENV in memory only */
-       #define CFG_ENV_ADDR            (CFG_MONITOR_BASE - 0x1000)
-       #define CFG_ENV_SIZE            0x2000
+       #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
+       #define CONFIG_ENV_ADDR         (CFG_MONITOR_BASE - 0x1000)
+       #define CONFIG_ENV_SIZE         0x2000
 #endif
 
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download */
@@ -483,6 +484,8 @@
  * MMU Setup
  */
 
+#define CONFIG_HIGH_BATS       1       /* High BATs supported */
+
 /* DDR: cache cacheable */
 #define CFG_IBAT0L     (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
 #define CFG_IBAT0U     (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
@@ -572,9 +575,9 @@
 
 #define CONFIG_BAUDRATE        115200
 
-#define CONFIG_LOADADDR        200000  /* default location for tftp and bootm */
+#define CONFIG_LOADADDR        500000  /* default location for tftp and bootm */
 
-#define CONFIG_BOOTDELAY 6     /* -1 disables auto-boot */
+#define CONFIG_BOOTDELAY 6     /* -1 disables auto-boot */
 #undef  CONFIG_BOOTARGS                /* the boot command will set bootargs */
 
 #define CONFIG_EXTRA_ENV_SETTINGS                                      \
@@ -583,7 +586,7 @@
    "ramdiskaddr=1000000\0"                                             \
    "ramdiskfile=ramfs.83xx\0"                                          \
    "fdtaddr=400000\0"                                                  \
-   "fdtfile=mpc832xemds.dtb\0"                                         \
+   "fdtfile=mpc832x_mds.dtb\0"                                         \
    ""
 
 #define CONFIG_NFSBOOTCOMMAND                                          \