Merge branch 'master' of git://git.denx.de/u-boot-usb

[J-u-boot.git] / include / configs / ELPPC.h

diff --git a/include/configs/ELPPC.h b/include/configs/ELPPC.h
index d2aa8b92e47c59dfa5b7a264ff7edafdd0ab754c..debfc3697e8e7052b25a51f03e87fd0454c6bd35 100644 (file)
--- a/include/configs/ELPPC.h
+++ b/include/configs/ELPPC.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2002 ELTEC Elektronik AG
  * Frank Gottschling <[email protected]>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -35,6 +19,8 @@
  * (easy to change)
  */
 
+#define        CONFIG_SYS_TEXT_BASE    0xFFF00000
+
 /* these hardware addresses are pretty bogus, please change them to
    suit your needs */
 
@@ -89,7 +75,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory */
-#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt */
 
 /*
  * choose between COM1 and COM2 as serial console
@@ -110,8 +95,6 @@
 
 #define CONFIG_SYS_LOAD_ADDR           0x1000000   /* default load address    */
 
-#define CONFIG_SYS_HZ                  1000        /* dec. freq: 1 ms ticks */
-
 #define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
@@ -174,9 +157,8 @@
  * Definitions for initial stack pointer and data area
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       0x00fd0000  /* above the memtest region */
-#define CONFIG_SYS_INIT_RAM_END        0x4000
-#define CONFIG_SYS_GBL_DATA_SIZE       64          /* size in bytes reserved for init data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_SIZE        0x4000
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
@@ -241,6 +223,7 @@
  * PCI stuff
  */
 #define CONFIG_PCI                                /* include pci support */
+#define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
 #define CONFIG_PCI_PNP                            /* pci plug-and-play */
 #define CONFIG_PCI_HOST         PCI_HOST_AUTO
 #undef  CONFIG_PCI_SCAN_SHOW
@@ -251,8 +234,8 @@
 #define CONFIG_VIDEO
 #define CONFIG_CFB_CONSOLE
 #define VIDEO_KBD_INIT_FCT    (simple_strtol (getenv("console"), NULL, 10))
-#define VIDEO_TSTC_FCT        serial_tstc
-#define VIDEO_GETC_FCT        serial_getc
+#define VIDEO_TSTC_FCT         serial_stub_tstc
+#define VIDEO_GETC_FCT         serial_stub_getc
 
 #define CONFIG_VIDEO_SMI_LYNXEM
 #define CONFIG_VIDEO_LOGO
@@ -314,9 +297,8 @@
 /*
  * Speed settings are board specific
  */
-#define CONFIG_SYS_BUS_HZ              100000000
-#define CONFIG_SYS_CPU_CLK             400000000
-#define CONFIG_SYS_BUS_CLK             CONFIG_SYS_BUS_HZ
+#define CONFIG_SYS_BUS_CLK     100000000
+#define CONFIG_SYS_CPU_CLK     400000000
 
 /*
  * For booting Linux, the board info and command line data
@@ -348,15 +330,6 @@
 #endif
 #define L2_ENABLE   (L2_INIT | L2CR_L2E)
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD           0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM           0x02    /* Software reboot */
-
-#define CONFIG_NET_MULTI        /* Multi ethernet cards support */
 #define CONFIG_EEPRO100
 #define CONFIG_SYS_RX_ETH_BUFFER       8               /* use 8 rx buffer on eepro100  */
 #define CONFIG_EEPRO100_SROM_WRITE