x86: samus: Add a target to boot through TPL

[J-u-boot.git] / include / configs / mx53smd.h

diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h
index 48b32ddab689a946acd759ec6bd20a23c20265c8..e606ee81b5f8e03faa4247f40ce7dc807f6481c6 100644 (file)
--- a/include/configs/mx53smd.h
+++ b/include/configs/mx53smd.h
@@ -1,34 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2011 Freescale Semiconductor, Inc.
  *
  * Configuration settings for the MX53SMD Freescale board.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_MX53
-
-#define CONFIG_SYS_MX5_HCLK    24000000
-#define CONFIG_SYS_MX5_CLK32           32768
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
 #define CONFIG_MACH_TYPE       MACH_TYPE_MX53_SMD
 
 #include <asm/arch/imx-regs.h>
@@ -36,66 +15,42 @@
 #define CONFIG_CMDLINE_TAG                     /* enable passing of ATAGs */
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+
+#define CONFIG_SYS_FSL_CLK
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
 
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_MXC_GPIO
-
 #define CONFIG_MXC_UART
-#define CONFIG_SYS_MX53_UART1
+#define CONFIG_MXC_UART_BASE   UART1_BASE
 
 /* I2C Configs */
-#define CONFIG_CMD_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_MX53_PORT2
-#define CONFIG_SYS_I2C_SPEED            100000
-#define CONFIG_SYS_I2C_SLAVE            0xfe
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 
 /* MMC Configs */
-#define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 #define CONFIG_SYS_FSL_ESDHC_NUM       1
 
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
-
 /* Eth Configs */
 #define CONFIG_HAS_ETH1
-#define CONFIG_MII
-#define CONFIG_DISCOVER_PHY
 
 #define CONFIG_FEC_MXC
 #define IMX_FEC_BASE   FEC_BASE_ADDR
 #define CONFIG_FEC_MXC_PHYADDR 0x1F
 
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
-
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX              1
-#define CONFIG_BAUDRATE                        115200
-#define CONFIG_SYS_BAUDRATE_TABLE      {9600, 19200, 38400, 57600, 115200}
 
 /* Command definition */
-#include <config_cmd_default.h>
-
-#undef CONFIG_CMD_IMLS
-
-#define CONFIG_BOOTDELAY       3
 
 #define CONFIG_ETHPRIME                "FEC0"
 
 #define CONFIG_LOADADDR                0x70800000      /* loadaddr env var */
-#define CONFIG_SYS_TEXT_BASE    0x77800000
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "script=boot.scr\0" \
@@ -123,7 +78,7 @@
                "dhcp ${uimage}; bootm\0" \
 
 #define CONFIG_BOOTCOMMAND \
-       "if mmc rescan ${mmcdev}; then " \
+       "mmc dev ${mmcdev}; if mmc rescan; then " \
                "if run loadbootscript; then " \
                        "run bootscript; " \
                "else " \
@@ -136,31 +91,13 @@
 #define CONFIG_ARP_TIMEOUT     200UL
 
 /* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP            /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER         /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
-#define CONFIG_SYS_PROMPT              "MX53SMD U-Boot > "
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_CBSIZE              256     /* Console I/O Buffer Size */
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS     16      /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 
 #define CONFIG_SYS_MEMTEST_START       0x70000000
-#define CONFIG_SYS_MEMTEST_END         0x10000
+#define CONFIG_SYS_MEMTEST_END         0x70010000
 
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 
-#define CONFIG_SYS_HZ          1000
-#define CONFIG_CMDLINE_EDITING
-
-/* Stack sizes */
-#define CONFIG_STACKSIZE       (128 * 1024)    /* regular stack */
-
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS   2
 #define PHYS_SDRAM_1           CSD0_BASE_ADDR
 #define PHYS_SDRAM_1_SIZE      (512 * 1024 * 1024)
 #define PHYS_SDRAM_2           CSD1_BASE_ADDR
@@ -176,14 +113,9 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
-
+/* environment organization */
 #define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
 #define CONFIG_ENV_SIZE        (8 * 1024)
-#define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV 0
 
-#define CONFIG_OF_LIBFDT
-
 #endif                         /* __CONFIG_H */