board: asus: tf600t: enable TEGRA20_SLINK only for TF600T

[J-u-boot.git] / configs / smartweb_defconfig

diff --git a/configs/smartweb_defconfig b/configs/smartweb_defconfig
index 64a77b0ddaeb9dcef032accb271f867c73082deb..66685230982511e200377df6aa562c52bb5b8e6f 100644 (file)
--- a/configs/smartweb_defconfig
+++ b/configs/smartweb_defconfig
@@ -3,39 +3,55 @@ CONFIG_SKIP_LOWLEVEL_INIT_ONLY=y
 CONFIG_SPL_SKIP_LOWLEVEL_INIT_ONLY=y
 CONFIG_SPL_SYS_ICACHE_OFF=y
 CONFIG_SPL_SYS_DCACHE_OFF=y
-CONFIG_SPL_SYS_THUMB_BUILD=y
 # CONFIG_SPL_USE_ARCH_MEMCPY is not set
 # CONFIG_SPL_USE_ARCH_MEMSET is not set
 CONFIG_ARCH_AT91=y
-CONFIG_SYS_TEXT_BASE=0x23000000
+CONFIG_TEXT_BASE=0x23000000
 CONFIG_SYS_MALLOC_LEN=0x460000
-CONFIG_SYS_MALLOC_F_LEN=0x2000
 CONFIG_TARGET_SMARTWEB=y
+CONFIG_AT91_GPIO_PULLUP=y
+CONFIG_ATMEL_LEGACY=y
 CONFIG_SPL_GPIO=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_ENV_OFFSET=0x100000
 CONFIG_DEFAULT_DEVICE_TREE="at91sam9260-smartweb"
+CONFIG_SPL_STACK=0x301000
 CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x180000
 CONFIG_SYS_LOAD_ADDR=0x22000000
+CONFIG_LTO=y
 CONFIG_FIT=y
+CONFIG_NAND_BOOT=y
 CONFIG_BOOTDELAY=3
 CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
 CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b"
 CONFIG_USE_BOOTCOMMAND=y
 CONFIG_BOOTCOMMAND="run flashboot"
+CONFIG_SYS_CBSIZE=512
+CONFIG_SYS_PBSIZE=537
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_SPL_MAX_SIZE=0x1000
+CONFIG_SPL_PAD_TO=0x20000
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x20000000
+CONFIG_SPL_BSS_MAX_SIZE=0x4000
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_SYS_MALLOC=y
+CONFIG_SPL_SYS_MALLOC_SIZE=0x460000
 CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_NAND_RAW_ONLY=y
 CONFIG_SPL_NAND_DRIVERS=y
 CONFIG_SPL_NAND_ECC=y
+CONFIG_SPL_NAND_SOFTECC=y
 CONFIG_SPL_NAND_BASE=y
 CONFIG_HUSH_PARSER=y
 CONFIG_SYS_PROMPT="U-Boot# "
+CONFIG_SYS_MAXARGS=32
 # CONFIG_CMD_IMI is not set
 CONFIG_CMD_DFU=y
 # CONFIG_CMD_LOADS is not set
@@ -53,6 +69,7 @@ CONFIG_OF_CONTROL=y
 CONFIG_OF_EMBED=y
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
+CONFIG_ENV_RANGE=0x80000
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NET_RETRY_COUNT=20
@@ -63,22 +80,23 @@ CONFIG_SYS_DFU_DATA_BUF_SIZE=0x100000
 CONFIG_AT91_GPIO=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
 # CONFIG_SYS_NAND_USE_FLASH_BBT is not set
 CONFIG_NAND_ATMEL=y
 CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
-CONFIG_SYS_NAND_PAGE_COUNT=0x40
 CONFIG_SYS_NAND_PAGE_SIZE=0x800
 CONFIG_SYS_NAND_OOBSIZE=0x40
 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
 CONFIG_SYS_NAND_U_BOOT_OFFS=0x20000
 CONFIG_MACB=y
+CONFIG_RMII=y
 CONFIG_ATMEL_USART=y
 CONFIG_USB=y
+CONFIG_USB_ATMEL=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MANUFACTURER="Siemens AG"
 CONFIG_USB_GADGET_VENDOR_NUM=0x0908
 CONFIG_USB_GADGET_PRODUCT_NUM=0x02d2
+CONFIG_USB_GADGET_AT91=y
 CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_WDT=y
 CONFIG_WDT_AT91=y