strider: Migrate to CONFIG_TARGET_STRIDER

[J-u-boot.git] / include / configs / dreamplug.h

diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h
index ea6e5c0329ca841442f55e8a60549cbf351d2552..f7f9141dd0e1a9d0d8adb4ffcdc8e93821f209ec 100644 (file)
--- a/include/configs/dreamplug.h
+++ b/include/configs/dreamplug.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2011
  * Jason Cooper <[email protected]>
@@ -5,81 +6,32 @@
  * Based on work by:
  * Marvell Semiconductor <www.marvell.com>
  * Written-by: Siddarth Gore <[email protected]>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef _CONFIG_DREAMPLUG_H
 #define _CONFIG_DREAMPLUG_H
 
-/*
- * FIXME: This belongs in mach-types.h.  However, we only pull mach-types
- * from Linus' kernel.org tree.  This hasn't been updated primarily due to
- * the recent arch/arm reshuffling.  So, in the meantime, we'll place it
- * here.
- */
-#include <asm/mach-types.h>
-#ifdef MACH_TYPE_DREAMPLUG
-#error "MACH_TYPE_DREAMPLUG has been defined properly, please remove this."
-#else
-#define MACH_TYPE_DREAMPLUG            3550
-#endif
-
-/*
- * Version number information
- */
-#define CONFIG_IDENT_STRING    "\nMarvell-DreamPlug"
-
 /*
  * High Level Configuration Options (easy to change)
  */
 #define CONFIG_SHEEVA_88SV131  1       /* CPU Core subversion */
-#define CONFIG_KW88F6281       1       /* SOC Name */
 #define CONFIG_MACH_TYPE       MACH_TYPE_DREAMPLUG
-#define CONFIG_SKIP_LOWLEVEL_INIT      /* disable board lowlevel_init */
-#define CONFIG_SYS_GENERIC_BOARD
-
-/* Add target to build it automatically upon "make" */
-#define CONFIG_BUILD_TARGET     "u-boot.kwb"
 
 /*
  * Commands configuration
  */
-#define CONFIG_SYS_NO_FLASH            /* Declare no flash (NOR/SPI) */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_DATE
 
 /*
- * mv-common.h should be defined after CMD configs since it used them
+ * mv-plug-common.h should be defined after CMD configs since it used them
  * to enable certain macros
  */
-#include "mv-common.h"
+#include "mv-plug-common.h"
 
 /*
  *  Environment variables configurations
  */
 #ifdef CONFIG_SPI_FLASH
-#define CONFIG_ENV_IS_IN_SPI_FLASH     1
 #define CONFIG_ENV_SECT_SIZE           0x10000 /* 64k */
-#else
-#define CONFIG_ENV_IS_NOWHERE          1       /* if env in SDRAM */
-#endif
-
-#ifdef CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH               1
-#define CONFIG_HARD_SPI                        1
-#define CONFIG_KIRKWOOD_SPI            1
-#define CONFIG_SPI_FLASH_MACRONIX      1
-#define CONFIG_ENV_SPI_BUS             0
-#define CONFIG_ENV_SPI_CS              0
-#define CONFIG_ENV_SPI_MAX_HZ          50000000 /* 50 MHz */
 #endif
 
 /*
@@ -121,20 +73,4 @@
 #define CONFIG_SYS_ATA_IDE0_OFFSET     MV_SATA_PORT0_OFFSET
 #endif /*CONFIG_MVSATA_IDE*/
 
-/*
- * RTC driver configuration
- */
-#ifdef CONFIG_CMD_DATE
-#define CONFIG_RTC_MV
-#endif /* CONFIG_CMD_DATE */
-
-#define CONFIG_SYS_ALT_MEMTEST
-
-/*
- * display enhanced info about the cpu at boot.
- */
-#define CONFIG_DISPLAY_CPUINFO
-
-#define CONFIG_OF_LIBFDT
-
 #endif /* _CONFIG_DREAMPLUG_H */