imx6: standardise filesystem and boot options

[J-u-boot.git] / include / configs / mx6slevk.h

diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
index 4fcaf515c7bb186076a9da07a880906bc93bacaf..5bb84c484a45748d4589d0add0c73285a41cd27d 100644 (file)
--- a/include/configs/mx6slevk.h
+++ b/include/configs/mx6slevk.h
@@ -9,30 +9,15 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <asm/arch/imx-regs.h>
-#include <asm/imx-common/gpio.h>
-#include <linux/sizes.h>
 #include "mx6_common.h"
 
-#define CONFIG_MX6
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-
 #define MACH_TYPE_MX6SLEVK             4307
 #define CONFIG_MACH_TYPE               MACH_TYPE_MX6SLEVK
 
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-
-#define CONFIG_SYS_GENERIC_BOARD
-
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN          (3 * SZ_1M)
 
 #define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_MXC_GPIO
 
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART1_IPS_BASE_ADDR
@@ -45,8 +30,19 @@
 #define CONFIG_MMC
 #define CONFIG_CMD_MMC
 #define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_FAT
-#define CONFIG_DOS_PARTITION
+
+/* I2C Configs */
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
+#define CONFIG_SYS_I2C_SPEED             100000
+
+/* PMIC */
+#define CONFIG_POWER
+#define CONFIG_POWER_I2C
+#define CONFIG_POWER_PFUZE100
+#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
 
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
@@ -62,21 +58,6 @@
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_SMSC
 
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX              1
-#define CONFIG_BAUDRATE                        115200
-
-/* Command definition */
-#include <config_cmd_default.h>
-
-#undef CONFIG_CMD_IMLS
-
-#define CONFIG_BOOTDELAY               3
-
-#define CONFIG_LOADADDR                        0x82000000
-#define CONFIG_SYS_TEXT_BASE           0x87800000
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "script=boot.scr\0" \
        "image=zImage\0" \
@@ -87,7 +68,7 @@
        "fdt_addr=0x88000000\0" \
        "boot_fdt=try\0" \
        "ip_dyn=yes\0" \
-       "mmcdev=0\0" \
+       "mmcdev=1\0" \
        "mmcpart=1\0" \
        "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
        "mmcargs=setenv bootargs console=${console},${baudrate} " \
@@ -152,22 +133,9 @@
           "else run netboot; fi"
 
 /* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_CBSIZE              256
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS             16
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
 #define CONFIG_SYS_MEMTEST_START       0x80000000
 #define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + SZ_512M)
 
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
-
-#define CONFIG_CMDLINE_EDITING
 #define CONFIG_STACKSIZE               SZ_128K
 
 /* Physical Memory Map */
@@ -184,15 +152,21 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH
-
-#define CONFIG_ENV_OFFSET              (6 * SZ_64K)
+/* Environment organization */
 #define CONFIG_ENV_SIZE                        SZ_8K
-#define CONFIG_ENV_IS_IN_MMC
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_CMD_BOOTZ
+#if defined CONFIG_SYS_BOOT_SPINOR
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_OFFSET               (768 * 1024)
+#define CONFIG_ENV_SECT_SIZE            (64 * 1024)
+#define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
+#define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
+#define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
+#define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
+#else
+#define CONFIG_ENV_OFFSET              (8 * SZ_64K)
+#define CONFIG_ENV_IS_IN_MMC
+#endif
 
 #ifndef CONFIG_SYS_DCACHE_OFF
 #define CONFIG_CMD_CACHE
@@ -209,9 +183,30 @@
 #define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
 #endif
 
+/* USB Configs */
+#define CONFIG_CMD_USB
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MX6
+#define CONFIG_USB_STORAGE
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
+#define CONFIG_MXC_USB_FLAGS           0
+#define CONFIG_USB_MAX_CONTROLLER_COUNT        2
+#endif
+
 #define CONFIG_SYS_FSL_USDHC_NUM       3
 #if defined(CONFIG_ENV_IS_IN_MMC)
 #define CONFIG_SYS_MMC_ENV_DEV         1       /* SDHC2*/
 #endif
 
+#define CONFIG_IMX6_THERMAL
+
+#define CONFIG_CMD_FUSE
+#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
+#define CONFIG_MXC_OCOTP
+#endif
+
 #endif                         /* __CONFIG_H */